Engine (30)

Super Stock® Alternator Style Engine Case — 3.5" bore, standard, natural finish

-€392.39

S&S CYCLE Super Stock® Alternator Style Engine Case — 3.5" bore,...

Alternator-style engine case with 3.5" stock bore, complete hardware kit, machined for EFI fitment. Made in USA.

€1,529.00 €1,921.39

-€391.81

S&S CYCLE Super Stock® Big Bore Engine Case — 3.625" bore, Raw

Precision-machined big-bore crankcase kit, machined for EFI; includes hardware, bearings, seals and installation instructions.

€1,523.68 €1,915.49

-€8.55

JAMES GASKET Oil Pump Shaft Key — 10-pack

Precision replacement shaft key for oil pump. Made in the U.S.A.

€29.02 €37.57

$Steel Breather Gear Kit — Oversized +0.03\", requires matching cam and pinion$

-€38.85

S&S CYCLE Steel Breather Gear Kit — Oversized +0.03\", requires matching...

Includes gear and spacer; requires corresponding cam and pinion; made in the U.S.A.

€151.07 €189.92

-€140.80

S&S CYCLE Heavy-Duty Connecting Rod Sets — Steel

Complete heavy-duty rod set with front and rear rods, crankpin, reinforced cages and roller bearings. Deep-forged and heat-treated; 0.120" wider than stock and fits strokes up to 5.00". Made in the USA.

€547.52 €688.32

Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S CYCLE 34-7011

-€140.80

S&S CYCLE Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S...

Complete kit with front and rear rods, crankpin and nuts, durable cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; rod-to-rod clearance for strokes up to 5.00". Installation may require additional clearancing.

€547.52 €688.32

-€3.89

JAMES GASKET 5th Gear O-Ring & Seal — Main drive gear, oil seal

O-ring and seal for reliable leak prevention. Durable molded construction. Made in the U.S.A.

€13.22 €17.11

-€7.55

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€55.83
Out of Stock

S&S CYCLE Valve Spring Kit — 0.550" lift, 140 lb seat pressure

Allows additional rocker clearance for '48-'65 Panheads; includes late single bottom collars for S&S and stock late '81-'85 heads; works with stock-style bottom collars and thin-stem valves with thicker keepers.

€217.09 €272.92

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25
Out of Stock

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

-€3.17
Out of Stock

S&S CYCLE Rep Gasket Base Rocker Cover 4-1/8" — 90-4071-S

Replacement gasket for rocker cover base; fits 4-1/8" openings.

€12.34 €15.51

-€4.26

JAMES GASKET Oil Pump Gasket Kit — JGI-36-FLH

Complete gasket kit for oil pump service. Made in the U.S.A.

€14.49 €18.75

Primary to Transmission Gasket — 0.8 mm thickness, 10 Pack

-€27.10

JAMES GASKET Primary to Transmission Gasket — 0.8 mm thickness, 10 Pack

Flexible MicroPore paper gaskets deliver high fluid resistance, reliable sealability across flange conditions, and heat tolerance above 500 degrees. Made in the U.S.A.

€37.38 €64.48

-€10.73
New

JAMES GASKET JAMES GASKET CAM GR CVR GSKT 36-40 EL

CAM GR CVR GSKT 36-40 EL

€30.38 €41.11

-€2.16
New

JAMES GASKET JAMES GASKET GSKT DIST BASE 36-64 BT

GSKT DIST BASE 36-64 BT

€6.11 €8.27

-€14.56

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.875"

Replacement ring set for two pistons, compatible with S&S pistons only.

€56.59 €71.15

-€325.30

S&S CYCLE 96" Big Bore Kit — 3.625" bore, 4-5/8" stroke, Black

Complete 96" big bore kit includes cylinders, pistons, rings and gaskets; made in the U.S.A.; requires crankcase boring and a skilled technician for installation.

€1,265.05 €1,590.35

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company