Engine (30)

Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S CYCLE 34-7011

-€140.80
Out of Stock

S&S CYCLE Heavy-Duty Connecting Rod Sets — Set, Heavy Duty, Steel, S&S...

Complete kit with front and rear rods, crankpin and nuts, durable cages and roller bearings. Deep-forged and heat-treated, 0.120" wider than stock; rod-to-rod clearance for strokes up to 5.00". Installation may require additional clearancing.

€547.52 €688.32

Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

-€79.01
Out of Stock

DRAG SPECIALTIES Connecting Rod Assembly — Steel, Set, 24275-57-BX-LB1

Heavy-duty, OEM-spec connecting rod assembly supplied as a complete, ready-to-install set.

€223.28 €302.29

Countershaft Gear End Washer Set — 7-pack

-€10.47
Out of Stock

EASTERN MOTORCYCLE PARTS Countershaft Gear End Washer Set — 7-pack

Precision steel washers for gear-end transmission applications; matched group for service and maintenance. Made in the U.S.A.

€29.56 €40.03

1st and 2nd Gear Countershaft Washers — 5 Pack

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS 1st and 2nd Gear Countershaft Washers — 5 Pack

Replacement washers for the 1st and 2nd gear countershaft; maintain correct axial spacing and shifting performance.

€17.70 €23.96

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Retaining Washers — Standard size

Precision metal rings for securing fasteners; manufactured in the U.S.A., suitable for automotive and general use.

€23.64 €32.00

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Washers — Standard, 2nd Gear, 3rd Gear, 5 Pack

Precision washers for consistent spacing and load distribution. Made in the U.S.A.

€17.70 €23.96

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Washers — +0.015", 2nd/3rd gear, 5 pack

Precision mainshaft washers that promote reliable gear alignment and smooth shifting; durable and corrosion-resistant.

€17.70 €23.96

1st Gear Countershaft Thrust Washers — 5-Pack

-€6.26
Out of Stock

EASTERN MOTORCYCLE PARTS 1st Gear Countershaft Thrust Washers — 5-Pack

Thrust washer for 4-Speed Big Twin engines; controls axial play and supports transmission longevity.

€17.70 €23.96

Countershaft Inner Retaining Washers — 5-pack

-€5.74
Out of Stock

EASTERN MOTORCYCLE PARTS Countershaft Inner Retaining Washers — 5-pack

Precision countershaft inner retaining washers for secure fit and reliable performance. Made in the U.S.A.

€16.22 €21.96

$Mainshaft Retaining Washers — 1.65 mm (0.065\"), 4-Speed, 5 Pack$

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Retaining Washers — 1.65 mm (0.065\"), 4-Speed, 5 Pack

Replacement retaining washers for 4-speed Big Twins. Packaged for easy maintenance and repairs.

€23.64 €32.00

Mainshaft Retaining Washers — 1.78 mm thickness, 4-speed, 5 pack

-€8.36
Out of Stock

EASTERN MOTORCYCLE PARTS Mainshaft Retaining Washers — 1.78 mm thickness, 4-speed, 5 pack

Replacement retaining washers for Big Twins.

€23.64 €32.00

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11
Out of Stock

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22
Out of Stock

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60
Out of Stock

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€3.89
Out of Stock

JAMES GASKET 5th Gear O-Ring & Seal — Main drive gear, oil seal

O-ring and seal for reliable leak prevention. Durable molded construction. Made in the U.S.A.

€13.22 €17.11

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€6.48
Out of Stock

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

-€7.55
Out of Stock

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€55.83
Out of Stock

S&S CYCLE Valve Spring Kit — 0.550" lift, 140 lb seat

Comprehensive valve spring kit for '48-'65 Panheads and many late-model heads. Designed for cams up to 0.550" lift. Made in the USA.

€217.09 €272.92

-€11.00
Out of Stock

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25
Out of Stock

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45
Out of Stock

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17
Out of Stock

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

-€3.97
Out of Stock

DRAG SPECIALTIES Inner Rocker Box Gaskets — 0.190" thickness, inner mount, 10-pack

Replacement inner gasket for rocker box kits. Durable, heat- and oil-resistant material with a precision profile for reliable sealing.

€11.20 €15.17

-€3.93
Out of Stock

JIMS Cam Cover O-Ring — Large, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€15.31 €19.24

XL Front Engine Mount Plates — Chrome, Steel

-€14.73
Out of Stock

DRAG SPECIALTIES XL Front Engine Mount Plates — Chrome, Steel

Precision front engine mount plates for XL models—direct-fit installation and reliable alignment.

€41.61 €56.34

-€1.27
Out of Stock

JIMS Cam Cover O-Ring — Small, Twin Cam

Seals cam covers to prevent oil leaks. Fits most cam covers. Made in the U.S.A.

€4.97 €6.24

-€7.56
Out of Stock

DRAG SPECIALTIES Front Motor Mount Plate — Front, Chrome

Precision-engineered engine mount plate for OEM-fit alignment and easy bolt-on installation.

€21.35 €28.91

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine