Engine (3)

-€0.41

101 OCTANE Tyre tubeless valve angled 60° — 16 mm feed-through

60° angled tubeless tyre valve for rims with 16 mm feed-through; ideal for scooters, quads and small-diameter wheels.

€1.59 €2.00

-€0.41

101 OCTANE Tyre valve Tubeless straight short TR412

Short, straight TR412 valve suitable for tubeless motorcycle and scooter rims.

€1.59 €2.00

Tyre valve Tubeless straight short TR412 — Short, TR-412, 10 pack, Black

-€1.68

101 OCTANE Tyre valve Tubeless straight short TR412 — Short, TR-412, 10...

Short straight tubeless tyre valve; total length 3.6 cm, visible 2.6 cm; fits 10–12 inch rims with 11.3 mm valve hole.

€6.82 €8.50

-€11.16

NAMZ Colored Hose Clamps for Oil Lines — 3/8" oil lines, 6 pack

Custom-colored clamps for braided copper, stainless steel, and rubber oil lines; fits most manufacturers' braided rubber hoses.

€33.49 €44.65

High-Performance Piston Kit — 3.5055" piston, 3-13/16" stroke, 1200 cc, Aluminum

-€95.59

WISECO High-Performance Piston Kit — 3.5055" piston, 3-13/16" stroke,...

Complete top-end piston kit with X-Ring package, rings, retainer clips and chrome piston pins. Made in the USA.

€270.44 €366.03

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€2.51

EASTERN MOTORCYCLE PARTS Cam Shims — 0.015", 10-pack

Essential shims for setting up new cams. Made in the USA.

€7.09 €9.60

-€193.85

S&S CYCLE 1200cc Conversion Kit for XL883 — 3.500" bore, 9.4:1 compression

Ready-to-assemble 1200cc conversion kit for XL883; includes cylinders, pistons (11.2 cc dish), rings and gaskets.

€753.85 €947.70

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore, 9.4:1, powder-coated wrinkle black

-€221.42

S&S CYCLE 1200cc Conversion Kit for XL883 — 1200 cc, 3.500 in bore,...

Quick-fit pistons and premium aluminum cylinders with iron liners. Ready to assemble; no machining or re‑balancing required. Kit includes pistons, rings and gaskets. Must be used with 883 heads.

€871.69 €1,093.11

-€41.92

S&S CYCLE Oil Line Kit — fits '07–'16 Touring, Black, Silver, Gold

Complete oil line kit for S&S crankcase installs on '07–'16 Touring models. Includes formed adapter, oil lines, fittings and clamps. Made in the USA.

€163.02 €204.94

-€4.58

EASTERN MOTORCYCLE PARTS Cam Shims — 0.45", 5-pack

Precision cam shims for accurate valve adjustment. Made in the U.S.A.

€12.93 €17.51

-€17.44

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

Complete oil filter line kit with OEM-style feed and return lines, compression fittings, seals, and nuts for easy installation.

€49.31 €66.75

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€50.69

ANDREWS B2 Grind Cam — Exhaust close 25°

More mid-range and high-end power with a smooth idle. Best for 74/80 inch and small stroker engines. Requires spring spacing and main bearing boss clearance check.

€197.15 €247.84

-€8.88

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€25.05 €33.93

-€8.82

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€34.32 €43.14

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 €29.93

-€84.68

S&S CYCLE 510C Camshaft Kit — 510 Series grind, Chain

Complete 510C camshaft kit with cams, gaskets and hardware; bolt-in fit for 88", 95", 96" and 103" CID engines; stock pushrods and springs acceptable; made in the USA.

€329.33 €414.01

Tracker Series™ Piston Kit — 3.875" bore, 1546 cc

-€68.28

WISECO Tracker Series™ Piston Kit — 3.875" bore, 1546 cc

Two-piston kit with forged crowns, precision-fit rings, force-fed pin oiling, pressure-seal groove and ArmorGlide® skirt coating for reduced friction and improved durability.

€193.19 €261.47

570C Camshaft Kit — 88–103 CID, 570 Series grind, chain drive

-€84.68

S&S CYCLE 570C Camshaft Kit — 88–103 CID, 570 Series grind, chain drive

Complete camshaft kit for 88"–103" CID engines with 9:1–10:1 compression. Includes camshafts, gaskets, bearings, retaining ring, o-ring, thread lock and instructions. Strongest from 3200–3700 rpm. Requires high-lift valve springs; installer must verify coil bind and clearances. Made in the USA.

€329.33 €414.01

Tracker Series™ Piston Kit — Bore 3.885", Oversize +0.010", Stroke 4.000", 1554 cc

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.885", Oversize +0.010",...

Forged, precision-fit piston kit with ArmorGlide® coating; includes two pistons, rings, pins and circlips. Made in the USA.

€193.19 €261.47

-€84.68

S&S CYCLE 585C Chain Drive Camshaft Kit — 585 Series grind

Mid-range focused cam kit for 88"–107" big-twin engines. Strongest 3500–6000 rpm (smaller engines) and 2500–5000 rpm (larger engines). Made in the USA. Installer must check coil bind and clearances.

€329.33 €414.01

-€1.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.52 €8.17

Tracker Series™ Piston Kit — Bore 3.875", Displacement 1691 cc, Compression 10.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.875", Displacement 1691...

Forged, precision-fit piston kit with ArmorGlide® skirt coating and force-fed pin oiling. Value-pack includes two pistons, rings, pins, and circlips.

€193.19 €261.47

-€4.28

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€10.38 €14.66

Tracker Series™ Piston Kit — Bore 3.885 in, Stroke 4.375 in, Oversize +0.010 in

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.885 in, Stroke 4.375 in,...

Durable forged piston kit with low-friction skirt coating; includes two pistons, rings, pins and circlips, made in the USA.

€193.19 €261.47

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020", Stroke 4.375", Compression 10.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020",...

Forged aluminum piston kit with ArmorGlide® skirt coating; includes two pistons, rings, piston pins and circlips.

€193.19 €261.47

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine