Engine (3)

-€73.75
Out of Stock

JIMS Low-Profile Billet Tappet Covers/Pushrod Cover Kit — Black

Low-profile billet tappet and pushrod cover kit; fits Twin Cam pushrod covers only; sits 1/2" lower than stock; includes gaskets, O-rings and screws; made in USA.

€286.83 €360.58

-€55.92
Out of Stock

JIMS Piston Oiling Jet Kit — Silver

High-flow piston oiling jet kit designed for stock and high-performance flywheels; modified for stroker applications. Made in the U.S.A.

€217.44 €273.36

-€13.47
Out of Stock

JIMS Idler Shaft with Bushing — JIMS, 25791-KIT

Includes shaft and bushing. Made in the U.S.A. Kit for idler gear applications.

€52.38 €65.85

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

-€14.11
Out of Stock

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50
Out of Stock

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26
Out of Stock

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€249.64
Out of Stock

JIMS Roller Rocker Arms — Set of 4, front and rear

Precision-cast 4340 chromoly roller rocker arms that reduce valve train friction and increase top-end horsepower. Set includes two front and two rear rocker arms.

€970.82 €1,220.46

-€79.25
Out of Stock

SLYFOX Pushrod Covers — Set of 4

Pre-preg and autoclaved full carbon fiber pushrod covers. Lightweight, heat-resistant, precision molded for a flush fit.

€308.17 €387.42

$Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\" diameter$

-€47.80
Out of Stock

JIMS Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\"...

High-capacity hydraulic tappets developed for increased load, lubrication and service life; billet body and wider rollers.

€185.91 €233.71

-€46.22
Out of Stock

JIMS Powerglide™ Steady Roll Tappets — Standard, Hydraulic, JIMS 1827

Hydraulic tappets with a Steady Roll bronze bushing replacing the needle roller; increased load, lubrication and life capacities; billet steel body and hand-honed hydraulic cavity.

€179.76 €225.98

-€131.44
Out of Stock

JIMS Solid Adjustable Tappet Kit — JIMS 5525

4340 chromoly pushrods with solid adjustable tappets for aggressive cam profiles and high RPM; made in the U.S.A.

€511.17 €642.61

Flow Pro 1 Billet Oil Pump Complete Assembly — Black, 6061 billet aluminum

-€193.92
Out of Stock

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Black, 6061...

Complete oil pump kit with CNC-machined feed and return gears. Includes all internal components; check motor case thread size before installation. '73–'80 may require drilling (PART #DS-179009 sold separately).

€754.16 €948.08

-€9.21
Out of Stock

JIMS Rocker Arm Shaft — JIMS, 17611-83

Precision-machined replacement to restore valve-train alignment. Made in the U.S.A.

€35.82 €45.03

-€18.35
Out of Stock

JIMS Rocker Arm Bushings — 8-pack

Premium American-made valve-train components for precision performance and long service life.

€71.35 €89.70

-€28.51
Out of Stock

JIMS Crank Pin — 23960-54, Silver

Quality replacement that meets or exceeds OEM specifications. Made in the U.S.A.

€110.85 €139.36

-€24.78
Out of Stock

JIMS Rod Race Set — Copper

Precision rod race set machined from 52100 Timken® bearing stock. Made in the U.S.A.

€96.39 €121.17

-€167.20
Out of Stock

JIMS Aluminum Lifter Blocks — Pair, Aluminum finish

Kits include front and rear lifter blocks plus gaskets. Mounting screws sold separately; 53-65 models use 1/4"-24 screws. Made in the U.S.A.

€650.23 €817.43

-€37.12
Out of Stock

JIMS Motor Sprocket Shaft — JIMS, 24001-56

Precision motor sprocket shaft designed for reliable power transfer and long service life. Made in the U.S.A.

€144.38 €181.50

-€37.40
Out of Stock

JIMS Right-Side Crankcase Bushing — Standard Size, 24599-40

Precision right-side crankcase bushing with 360° oiling and U.S.-made construction.

€145.42 €182.82

-€39.47
Out of Stock

JIMS Pinion Gear Shaft — JIMS, 24006-54A

Precision pinion gear shaft, made in the U.S.A., designed for reliable drivetrain performance.

€153.55 €193.02

-€45.01
Out of Stock

JIMS Pinion Gear Shaft — JIMS, 24007-39

Precision replacement shaft made in the U.S.A.; heat-treated and precision ground for long life. Inspect bearings and seals during installation.

€175.03 €220.04

-€40.26
Out of Stock

JIMS Motor Sprocket Shaft — 23909-80, Steel

All ground diameters concentric to within .0003" for easier flywheel trueing and rebuilding. Manufactured from domestic materials. Made in the USA.

€156.57 €196.83

-€34.42
Out of Stock

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84
Out of Stock

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

-€3.09
Out of Stock

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€34.42
Out of Stock

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

-€79.38
Out of Stock

JIMS Chrome Billet Lifter Covers — Pair

Precision CNC-machined lifter covers. Gaskets and screws included. Made in the United States.

€308.69 €388.07

-€31.17
Out of Stock

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company