Engine (3)

-€7.41

EASTERN MOTORCYCLE PARTS Counterbalance Shaft Bearing — Left mount

High-quality replacement bearing for counterbalance shafts. Made in the U.S.A.

€20.97 €28.38

-€6.88

EASTERN MOTORCYCLE PARTS Counterbalance Shaft Bearing — Right mount, A-8991

Precision counterbalance shaft bearing — high-quality replacement; made in the U.S.A.

€19.47 €26.35

-€17.71

DRAG SPECIALTIES Cam Chain Tensioner — Pair, Drag Specialties, 87623

Stock replacement hydraulic cam chain tensioners sold as a primary/secondary two-piece kit for timing system maintenance.

€50.06 €67.77

-€4.58

EASTERN MOTORCYCLE PARTS Right Side Crankcase Bearing Washers — Right, 5 pack

Precision support discs for motorcycle bearing assemblies. Durable steel construction with corrosion-resistant finish. Made in the U.S.A.

€12.93 €17.51

-€8.08

EASTERN MOTORCYCLE PARTS Dowel Pins — 0.434" x 0.500" L, 10 pack

Replacement dowel pins for precise alignment and secure assembly.

€22.84 €30.92

-€2.53

EASTERN MOTORCYCLE PARTS Push Rod Tube Washers — 10 Pack

Precision-fit components that seal and secure engine tube assemblies. Made in the USA.

€7.15 €9.68

-€4.15

EASTERN MOTORCYCLE PARTS Transmission Lock Tab Washers — 10-pack, A-35050-40

Replace during transmission service to maintain secure lock tab fastening.

€11.74 €15.89

-€7.13

EASTERN MOTORCYCLE PARTS Knucklehead Oil Line — Chrome

Direct-fit oil line for Knucklehead engines. Easy installation; professional fitting recommended.

€20.16 €27.29

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE PARTS, A-24004-03

-€30.82

EASTERN MOTORCYCLE PARTS Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE...

Left side sprocket shaft bearing kit for maintenance and rebuilds. Bearing and bearing race sold separately.

€87.10 €117.92

-€5.08

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — A-25344-99, Pinion

Precision support insert for cam support plate/cover; OEM-quality construction made in the U.S.A., designed to restore proper alignment and reduce wear.

€14.34 €19.42

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

-€7.65

EASTERN MOTORCYCLE PARTS Flywheel Thrust Washers — +0.005" pair

Replacement-style flywheel thrust washers designed to meet or exceed OEM standards; made in the U.S.A.

€21.60 €29.25

3-D Skull Points Cover — 0.750 in protrusion, Chrome

-€7.44

DRAG SPECIALTIES 3-D Skull Points Cover — 0.750 in protrusion, Chrome

Bold 3-D skull styling for your points cover; skull protrudes ~0.750 in for strong dimensional impact. Installs using existing mounting points.

€21.01 €28.45

-€8.32

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Bold 3-D skull styling with approximately .750" projection for a standout accent.

€23.50 €31.82

-€8.11

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Striking 3-D skull design that protrudes about 0.750"; adds custom attitude while maintaining function.

€22.92 €31.03

Die-Cast Head Bolt Covers — 4 Pack, Chrome

-€8.02

DRAG SPECIALTIES Die-Cast Head Bolt Covers — 4 Pack, Chrome

Precision die-cast head bolt covers; includes setscrews and hex wrench for easy installation.

€22.67 €30.69

-€9.79

DRAG SPECIALTIES Front Turn Signal Mount Kit — Chrome finish

Lets you mount handlebar bullet-style turn signals horizontally for a cleaner, low-profile front-end look.

€27.67 €37.46

-€7.57

EASTERN MOTORCYCLE PARTS Connecting Rod Races — Set of 3

Precision rod races made in the U.S.A. for reliable seating and reduced wear.

€21.40 €28.97

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

-€30.29

EASTERN MOTORCYCLE PARTS Crankcase Main Bearings — main crankshaft, roller

Precision crankcase main bearings — OEM-equal quality, made in the U.S.A.

€85.60 €115.89

-€30.29

EASTERN MOTORCYCLE PARTS Crankcase Main Bearings — Main crankshaft, roller kit

Precision crankcase bearings that meet or exceed original equipment specifications. Made in the United States.

€85.60 €115.89

-€14.81

EASTERN MOTORCYCLE PARTS Pinion Shaft Bearing — Pinion shaft, A-24623-99B

Precision component, made in the U.S.A.; durable steel construction; simple press-fit installation.

€41.85 €56.66

-€16.81

EASTERN MOTORCYCLE PARTS Rod Roller Bearings and Bearing Retainers — Connecting rod

Includes bearings and bearing retainers.

€47.50 €64.31

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine