Engine (3)

-€6.47

COLONY Bolt and Washer Kit — fit for sprocket, Silver

Bolt and Washer Kit for specific Harley-Davidson® motorcycle models. Made in U.S.A.

€25.15 €31.62

-€6.60

COLONY Bolt and Washer Kit — Sprocket, Silver

Bolt and washer kit for select Harley-Davidson® motorcycles. Made in U.S.A.

€25.68 €32.28

Primary Cover Bolt Kit — Chrome, Polished

-€9.01

COLONY Primary Cover Bolt Kit — Chrome, Polished

Replacement hardware kit. Made in the USA.

€35.01 €44.02

-€3.53

COLONY Jiffy Stand Mounting Kit — Zinc finish

Mounting kit includes pin, clip, washers, and bushings for jiffy stand installation.

€10.00 €13.53

-€4.30

COLONY Jiffy Stand Mounting Kit — Zinc

Replacement hardware for jiffy stand: pin, clip, washers and bushings included.

€16.68 €20.98

-€2.15

COLONY Jiffy Stand Clevis Pin Pretzel Clips — Zinc, 5-pack

Reproduction of the OEM 554A clip used on many 89 and up H-D kickstands.

€6.07 €8.22

-€6.14

COLONY Rocker Cover Bolt Kit — Chrome, Silver, Polished

Replacement hardware kit for rocker cover; made in the USA.

€17.38 €23.52

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

-€1.96

COLONY Front Brake Rotor Torx Bolt Kit — 5/16-18 x 7/8 in, zinc

Torx bolt set for front brake rotor with Torx head design for secure fastening. Size 5/16-18 x 7/8 in.

€7.60 €9.56

-€2.75

COLONY Rear Fender Support Mounting Screws/Nuts — 3/8"-24 x 15/16", zinc

Reproduction set of rear fender support mounting screws and locknuts, size 3/8"-24 x 15/16", made in the USA.

€7.81 €10.56

Fork Triple Clamp Screws — Black, Front, Kit

-€2.58

CULT WERK Fork Triple Clamp Screws — Black, Front, Kit

Four-piece triple tree bolt set: two for the upper clamp and two for the lower clamp. Direct replacements for original zinc-plated bolts; uncoated to prevent flaking during tightening.

€14.84 €17.42

-€2.69

CULT WERK Fork Triple Clamp Screws — Front, Black

4-piece triple clamp bolt kit: 2 upper, 2 lower. Replaces original zinc-plated bolts. Fits Harley-Davidson Sportster ® models.

€15.56 €18.25

Fork Triple Clamp Screws — Black, for Harley-Davidson Sportster, Kit

-€2.58

CULT WERK Fork Triple Clamp Screws — Black, for Harley-Davidson...

Kit of 4 triple clamp bolts that replace original zinc-plated bolts for Harley-Davidson Sportster ® models. Durable finish with no flaking.

€14.84 €17.42

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), Brake rotor, Chrome

-€4.34

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete hardware kit for mounting rotors, sprockets and belts; fits most H‑D brakes and drives; made in the U.S.A.

€16.90 €21.24

Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"), Chrome, Button-Head Torx

-€3.11

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"),...

Complete mounting kit for brake rotors, sprockets and belts; fits most H-D brakes, chain and belt drives. Made in the U.S.A.

€12.10 €15.21

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), hub-mounted rotors, chrome

-€3.37

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete kit for rotor, sprocket and belt mounting; fits most H-D brakes and chain or belt drives. Includes all necessary hardware; made in the United States.

€13.13 €16.50

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8 in), for spoke front wheel, Chrome

-€4.17

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8...

Complete hardware kit for rotor, sprocket and belt mounting; fits virtually all H-D brakes, chain and belt drives.

€16.22 €20.39

Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm (1-3/4") , for cast front and rear wheels

-€4.08

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm...

Complete mounting hardware kits for rotors, sprockets and belts; fits most H-D brakes, chain and belt drives.

€11.52 €15.60

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2 in), for cast wheels, chrome

-€6.02

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete kit with all hardware needed to mount rotors, sprockets and belt pulleys.

€23.36 €29.38

Rotor, Sprocket and Belt Mounting Hardware Kit — 31.8 mm (1-1/4"), Chrome, kit

-€5.16

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 31.8 mm...

Complete mounting hardware kit for brake rotors, sprockets and belt pulleys; fits most H-D brakes and drives.

€20.02 €25.18

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2"), chrome polished

-€5.16

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete mounting hardware kit for rotor, sprocket and belt assemblies; fits most H-D brakes, chains and belt drives.

€20.02 €25.18

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€9.48

COLONY Replacement Rocker Shaft End Plugs And Nuts — Chrome

Complete stock-style sets of replacement end plugs, nuts, and washers. Made in the U.S.A.

€36.88 €46.36

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company