Engine (3)

-€26.52

DRAG SPECIALTIES Pushrod Tube Kit — Black

Complete set to replace worn valve-train components and restore reliable operation.

€74.94 €101.46

-€17.71

DRAG SPECIALTIES Cam Chain Tensioner — Pair, Drag Specialties, 87623

Stock replacement hydraulic cam chain tensioners sold as a primary/secondary two-piece kit for timing system maintenance.

€50.06 €67.77

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

3-D Skull Points Cover — 0.750 in protrusion, Chrome

-€7.44

DRAG SPECIALTIES 3-D Skull Points Cover — 0.750 in protrusion, Chrome

Bold 3-D skull styling for your points cover; skull protrudes ~0.750 in for strong dimensional impact. Installs using existing mounting points.

€21.01 €28.45

-€8.32

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Bold 3-D skull styling with approximately .750" projection for a standout accent.

€23.50 €31.82

-€8.11

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Striking 3-D skull design that protrudes about 0.750"; adds custom attitude while maintaining function.

€22.92 €31.03

Die-Cast Head Bolt Covers — 4 Pack, Chrome

-€8.02

DRAG SPECIALTIES Die-Cast Head Bolt Covers — 4 Pack, Chrome

Precision die-cast head bolt covers; includes setscrews and hex wrench for easy installation.

€22.67 €30.69

-€9.79

DRAG SPECIALTIES Front Turn Signal Mount Kit — Chrome

Mounts handlebar bullet-style turn signals horizontally for a cleaner, low-profile look.

€27.67 €37.46

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€14.31

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€40.44 €54.75

Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG SPECIALTIES, 01-0149

-€17.21

DRAG SPECIALTIES Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG...

High-quality exhaust gaskets for sealing exhaust interconnects and preventing leaks.

€48.61 €65.82

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€14.86

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€42.00 €56.86

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

Nitrided Valve — Standard size, Head diameter 1.805 in, Length 4.420 in, Stem diameter 0.2760 in

-€9.40

KIBBLEWHITE Nitrided Valve — Standard size, Head diameter 1.805 in, Length...

Stellite-tipped stainless-steel valve nitrided for improved wear resistance, corrosion protection, and reduced friction.

€26.59 €35.99

Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem diameter, 4.420" length

-€9.40

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem...

One-piece stellite-tipped nitrided valve engineered to reduce friction and resist corrosion; compatible with leaded and unleaded fuels. Made in the USA.

€26.59 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, Head Diameter 1.630", Length 4.520", Stem Diameter 0.2755"

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, Head Diameter 1.630", Length...

One-piece nitrided valve with stellite tip for improved wear resistance, reduced friction, and compatibility with leaded and unleaded fuels. Made in USA.

€29.08 €36.57

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID 0.3098", Length 2.100"

-€8.80

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID...

Precision-machined nickel bronze valve guide providing superior wear resistance and heat conductivity. Compatible with unleaded fuel; accepts special seals (sold separately). Made in the USA.

€24.97 €33.77

-€3.46

KIBBLEWHITE Cylinder Dowels — 4 Pack, Black oxide, 83080-4

Designed for HD® Evolution OEM replacement. Machined from high‑grade metal with a corrosion‑resistant dark finish. Multipurpose alignment pins. Made in the USA.

€11.74 €15.20

Powdered Metal Valve Seats — Inside diameter 1.690", Outside diameter 2.1320", Seat height 0.450"

-€3.89

KIBBLEWHITE Powdered Metal Valve Seats — Inside diameter 1.690", Outside...

High-density powdered metal valve seats for superior wear resistance and thermal stability. Tested for track and street use.

€11.01 €14.90

Powdered Metal Valve Seats — ID 1.375", OD 1.7570", Seat height 0.450"

-€2.88

KIBBLEWHITE Powdered Metal Valve Seats — ID 1.375", OD 1.7570", Seat...

High-density powdered metal valve seats with exceptional wear resistance, machinability and thermal stability. Tested for street and track use with multiple fuels. Made in the USA.

€9.81 €12.69

Solid PC Valve Guide Seals — Stem diameter 5/16", Length 0.517", OD 0.510", 4 Pack

-€3.64

KIBBLEWHITE Solid PC Valve Guide Seals — Stem diameter 5/16", Length...

PTFE valve guide seals with twin-spring tension for reduced friction and reliable valve control. Made in USA.

€10.27 €13.91

Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length, stainless steel

-€5.91

KIBBLEWHITE Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length,...

One-piece stellite-tipped nitrided valve for reduced wear, improved flow, and corrosion resistance. Made in the USA.

€21.47 €27.38

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine