Engine (3)

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, Silver

-€3.29

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, Silver

Stepless® ear clamps with 360° stepless inner surface and narrow 5 mm band for concentrated seal compression.

€9.30 €12.59

Stepless® Ear Clamps for Fuel System — 5/16" ID fuel line, Silver, 10 Pack

-€4.03

MOTION PRO Stepless® Ear Clamps for Fuel System — 5/16" ID fuel line,...

360° Stepless® ear clamps with a narrow 5 mm band for concentrated sealing. Tamper-evident and lightweight; side jaw tool sold separately.

€11.36 €15.39

Stepless® Ear Clamps for Fuel System — 1/4" ID, 10 Pack, Silver

-€4.15

MOTION PRO Stepless® Ear Clamps for Fuel System — 1/4" ID, 10 Pack, Silver

Stepless® ear design for gap-free inner sealing and even compression.

€11.73 €15.88

-€4.32

GARDNER-WESTCOTT Disc Brake Bolt Kit — Torx® socket, chrome finish

Durable fastener set for securing stopping components. Vehicles with dual assemblies require two sets. Made in the U.S.A.

€16.77 €21.09

Caliper Mounting Bolt Kit — Chrome, for front

-€8.99

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Chrome, for front

Replacement bolts and washers for brake mounting; includes all necessary hardware.

€34.95 €43.94

Nylock Shock Nuts — 5/8-18, cadmium finish, pair

-€1.01

GARDNER-WESTCOTT Nylock Shock Nuts — 5/8-18, cadmium finish, pair

Durable nylock nuts that lock under vibration for dependable suspension fastening.

€3.93 €4.94

-€61.48

GARDNER-WESTCOTT Big Twin Motor Sets — SP-80-87

Complete Big Twin motor sets including side covers, lifter base timing plug, and front and rear motor mounts. Made in the U.S.A.

€239.13 €300.61

-€58.75

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver

Complete motor set including side covers, lifter timing plug, inner primary mount and front/rear mounts. Made in the U.S.A.

€228.48 €287.23

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

-€3.19

GARDNER-WESTCOTT Handle Bar Lever & Switch Box Bolt Kit — Silver, Polished

Complete hardware set for secure control mounting.

€12.40 €15.59

-€29.01

GARDNER-WESTCOTT Head Bolt Kit — 12-point flange, silver

Includes four long and four short headbolts. Made in the U.S.A.

€112.78 €141.79

-€6.63

GARDNER-WESTCOTT Button-Head Fender Rail Bolt Kit — 1" length

Six button-head bolts and A/N washers for mounting fender rails on Softail-style frames.

€25.77 €32.40

Socket Head Swingarm End Cap Bolt Kit — 7/16-14, 1-1/4", Chrome

-€6.36

GARDNER-WESTCOTT Socket Head Swingarm End Cap Bolt Kit — 7/16-14, 1-1/4", Chrome

Socket head bolts for swingarm end caps with a polished chrome finish. Made in the USA. Kit includes required hardware for one swingarm.

€24.74 €31.10

-€5.17

GARDNER-WESTCOTT Turn Signal Lens Bolt Kit — Chrome, P-61-13

Includes eight polished socket-head bolts and eight O-rings for front and rear turn signal lenses. Made in the U.S.A.

€20.13 €25.30

-€59.58

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€231.72 €291.30

-€3.64

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Rear, Chrome, Silver

Replaces OEM caliper mounting bolts and washers. Socket‑head hardware for accurate torqueing. Made in the USA.

€14.15 €17.79

-€1.57

GARDNER-WESTCOTT Taillight Lens Screw Kit — #8-32, 1", Chrome, Pair

Replacement screw kit for taillight lens. Made in the U.S.A. Durable hardware for a factory-correct fit.

€6.09 €7.66

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine