Engine (3)

-€44.64

DRAG SPECIALTIES Connecting Rod Assembly — 84589

Durable replacement connecting rod assembly that meets or exceeds OEM specs and ships fully fitted for easy installation.

€401.76 €446.40

-€31.56

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€284.06 €315.62

-€5.48

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€49.27 €54.75

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€5.69

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€51.17 €56.86

-€50.40

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€196.40 €246.80

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€50.40

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 €246.80

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

Nitrided Valve — Standard size, Head diameter 1.805 in, Length 4.420 in, Stem diameter 0.2760 in

-€9.40

KIBBLEWHITE Nitrided Valve — Standard size, Head diameter 1.805 in, Length...

Stellite-tipped stainless-steel valve nitrided for improved wear resistance, corrosion protection, and reduced friction.

€26.59 €35.99

Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem diameter, 4.420" length

-€9.40

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head diameter, 0.2760" stem...

One-piece stellite-tipped nitrided valve engineered to reduce friction and resist corrosion; compatible with leaded and unleaded fuels. Made in the USA.

€26.59 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — Head Dia 1.575", Stem Dia 0.2755", Length 4.520"

Stellite-tipped nitrided valve for improved wear resistance, reduced friction, and corrosion protection. Made in the USA.

€32.68 €44.23

Nitrided Valve — Oversize, Head Diameter 1.630", Length 4.520", Stem Diameter 0.2755"

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, Head Diameter 1.630", Length...

One-piece nitrided valve with stellite tip for improved wear resistance, reduced friction, and compatibility with leaded and unleaded fuels. Made in USA.

€29.08 €36.57

-€3.46

KIBBLEWHITE Cylinder Dowels — 4 Pack, Black oxide, 83080-4

Designed for HD® Evolution OEM replacement. Machined from high‑grade metal with a corrosion‑resistant dark finish. Multipurpose alignment pins. Made in the USA.

€11.74 €15.20

Powdered Metal Valve Seats — Inside diameter 1.690", Outside diameter 2.1320", Seat height 0.450"

-€3.89

KIBBLEWHITE Powdered Metal Valve Seats — Inside diameter 1.690", Outside...

High-density powdered metal valve seats for superior wear resistance and thermal stability. Tested for track and street use.

€11.01 €14.90

Powdered Metal Valve Seats — Inside diameter 1.375", Seat height 0.450"

-€2.88

KIBBLEWHITE Powdered Metal Valve Seats — Inside diameter 1.375", Seat...

High-density powdered-metal valve seats engineered for wear resistance and thermal stability; track- and street-tested for multiple fuels and induction types.

€9.81 €12.69

Solid PC Valve Guide Seals — 5/16" stem, 0.517" length, 0.510" outside diameter, PTFE, 4 Pack

-€3.64

KIBBLEWHITE Solid PC Valve Guide Seals — 5/16" stem, 0.517" length, 0.510"...

Kibblewhite Solid PC valve guide seals feature a twin spring design for continuous tension and low-friction performance. Made in the USA.

€10.27 €13.91

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

Nitrided Valve — Standard, 1.840" head, 4.445" length, 0.3100" stem

-€5.91

KIBBLEWHITE Nitrided Valve — Standard, 1.840" head, 4.445" length, 0.3100"...

One-piece stellite-tipped nitrided valve for improved wear resistance, reduced friction, and excellent flow characteristics. Made in the USA.

€21.47 €27.38

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length, 17° tulip angle

-€5.93

KIBBLEWHITE Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length, 17°...

Stellite-tipped nitrided valve for improved wear resistance, reduced friction, and corrosion protection. Made in the USA.

€22.99 €28.92

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

Nitrided Valve — Oversize, Head diameter 2.000 in, Stem diameter 0.3100 in, Length 4.445 in

-€14.36

KIBBLEWHITE Nitrided Valve — Oversize, Head diameter 2.000 in, Stem...

One-piece, stellite-tipped nitrided valve with .002" depth and .0002" surface buildup for improved wear resistance and reduced friction.

€48.81 €63.17

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

-€2.35

KIBBLEWHITE Shouldered Cast Iron Valve Guide — ID 0.3098 in, Length 2.100 in

Precision-machined, compatible with no-lead fuel and all valve-stem materials; accepts special valve guide seals (sold separately); made in the USA.

€7.03 €9.38

Shouldered Cast Iron Valve Guide — Inside diameter 0.3098", Length 2.100"

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Inside diameter 0.3098",...

Shouldered valve guide engineered for precise fit and dependable performance; seals sold separately.

€7.60 €10.28

-€2.68

KIBBLEWHITE Cast Iron Valve Guide — ID 0.3098" , OD 0.5620" , L 2.400"

Precision-machined cast iron valve guide compatible with lead-free fuel; accepts any valve-stem material. Sold each.

€7.60 €10.28

Shouldered Cast Iron Valve Guide — Oversize (+0.001 in), Inside diameter 0.3098 in, Length 2.100 in

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001 in),...

Precision-machined valve guide compatible with no-lead fuel; accepts special seals. Made in USA.

€7.60 €10.28

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), Length 2.100", ID 0.3098"

-€2.86

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), Length...

Precision-machined cast iron construction; compatible with no-lead fuel; accepts special seals (sold separately); made in USA.

€8.01 €10.87

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine