Engine (3)

-€2.68

COLONY Wheel Hub Outer Screw Kit — Cadmium-plated silver

Includes round head screws and washers. Made in the USA. Ready-to-install wheel hub outer screw kit.

€3.86 €6.54

Wire/Cable Clip — Wire/Cable/Rear Frame, Black, Parkerized, 2449-1

-€3.49

COLONY Wire/Cable Clip — Wire/Cable/Rear Frame, Black, Parkerized,...

High-quality reproduction clip for custom wiring applications. Made in the USA.

€9.85 €13.34

-€3.49

COLONY Wire/Cable Clip — Black, Parkerized

High-quality reproduction for securing wires and cables. Made in the USA.

€9.85 €13.34

-€3.49

COLONY Wire/Cable Clip — Black, Parkerized

Durable reproduction for custom applications. Made in the USA.

€9.85 €13.34

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€4.78

COLONY Shifter Lever Stud and Bushing Kit — Silver, Steel

Complete kit with all hardware to mount the shifter lever by hand, plus a wave washer to reduce rattling. Made in the U.S.A.

€10.77 €15.55

Brake Drum Wheel Mounting Socket Screw Set — 3/8-20 socket head, parkerized black

-€5.55

COLONY Brake Drum Wheel Mounting Socket Screw Set — 3/8-20 socket...

Reproduction mounting kit with chip curls at the socket hole bottom, reproduction of hardened 3/8"-20 bolts, made in the U.S.A.

€21.60 €27.15

-€9.40

KIBBLEWHITE Nitrided Valve — Head 1.805", Stem 0.2760", Length 4.420"

Stellite-tipped nitrided valve engineered to reduce wear and friction, improve flow characteristics and resist corrosion.

€26.59 €35.99

Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length 4.420"

-€9.40

KIBBLEWHITE Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction. Corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€26.59 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, 1.630" head, 4.520" length, 0.2755" stem

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, 1.630" head, 4.520" length, 0.2755"...

One-piece stellite-tipped stainless-steel nitrided valve that reduces friction and improves wear resistance. Compatible with leaded and unleaded fuels. Made in the USA.

€29.08 €36.57

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID 0.3098", Length 2.100"

-€8.80

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID...

Precision-machined nickel bronze valve guide providing superior wear resistance and heat conductivity. Compatible with unleaded fuel; accepts special seals (sold separately). Made in the USA.

€24.97 €33.77

-€3.46

KIBBLEWHITE Cylinder Dowels — 4 Pack, Black oxide, 83080-4

Designed for HD® Evolution OEM replacement. Machined from high‑grade metal with a corrosion‑resistant dark finish. Multipurpose alignment pins. Made in the USA.

€11.74 €15.20

-€3.89

KIBBLEWHITE Powdered Metal Valve Seats — 1.690", 0.450", Intake

High-density powdered metal seats with superior wear resistance and thermal stability; track-tested for high-RPM, multi-valve use. Made in the USA.

€11.01 €14.90

Powdered Metal Valve Seats — ID 1.375", OD 1.7570", Seat height 0.450"

-€2.88

KIBBLEWHITE Powdered Metal Valve Seats — ID 1.375", OD 1.7570", Seat...

High-density powdered metal valve seats with exceptional wear resistance, machinability and thermal stability. Tested for street and track use with multiple fuels. Made in the USA.

€9.81 €12.69

Solid PC Valve Guide Seals — Stem diameter 5/16", Length 0.517", OD 0.510", 4 Pack

-€3.64

KIBBLEWHITE Solid PC Valve Guide Seals — Stem diameter 5/16", Length...

PTFE valve guide seals with twin-spring tension for reduced friction and reliable valve control. Made in USA.

€10.27 €13.91

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length, stainless steel

-€5.91

KIBBLEWHITE Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length,...

One-piece stellite-tipped nitrided valve for reduced wear, improved flow, and corrosion resistance. Made in the USA.

€21.47 €27.38

-€5.93

KIBBLEWHITE Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length

One-piece stellite-tipped nitrided valve with superior wear resistance and reduced friction. Lightweight profiles for excellent flow. Compatible with leaded and unleaded fuels. Made in the USA.

€22.99 €28.92

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445" length, Intake

-€14.36

KIBBLEWHITE Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445"...

One-piece nitrided valve with stellite tip and nitrided surface (.002" depth, .0002" buildup) for superior wear resistance, corrosion protection, and improved flow. Compatible with leaded and unleaded fuels. Made in the USA.

€48.81 €63.17

-€9.07

KIBBLEWHITE C630 Valve Guides — 1.77" length, 0.3375" ID

Precision-machined bronze construction for durability
Tapered nose to reduce port obstruction and improve flow
Compatible with unleaded fuel and a range of valve‑stem materials
Accepts top‑hat valve seals (sold separately)
Made in the USA

€25.65 €34.72

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

-€6.50

COLONY Transmission Top Cover Screw Kit — Chrome

OEM duplicate for mounting the transmission top cover. Made in the USA.

€25.32 €31.82

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

-€2.35

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3098" ID, 2.100" length

Precision-machined shouldered valve guide compatible with no-lead fuel. Accepts special valve guide seals (sold separately). Made in the U.S.A.

€7.03 €9.38

Shouldered Cast Iron Valve Guide — 2.100" length, 0.3098" inside diameter

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 2.100" length, 0.3098"...

Precision-machined valve guide accepts special seals and works with no-lead fuel; made in the U.S.A.

€7.60 €10.28

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine