Engine (3)

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

-€59.58

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€231.72 €291.30

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and Keihin CV, Silver

-€17.15

TRASK Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and...

Mounts S&S E/G or Keihin CV style air cleaners to Mikuni HSR 42/45 carburetors. Made in the USA.

€66.68 €83.83

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

-€24.44

JIMS Rocker Arm Shaft — Part 17611-66B

Durable rocker arm shaft for precise valve-train operation. Made in the U.S.A.

€95.06 €119.50

-€18.35

JIMS Rocker Arm Bushings — 8-pack

Premium American-made valve-train components for precision performance and long service life.

€71.35 €89.70

Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio, set of 4, steel

-€228.22

JIMS Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio,...

Ultra-light roller rocker arms with 660 bronze bushings and a bearing-grade roller tip. Accepts up to 0.700" lift; Twin Cam boxes may need clearance.

€887.55 €1,115.77

-€30.23

JIMS Crank Pin — 3-hole, Silver

Quality replacement that equals or exceeds OEM specifications. Made in the U.S.A.

€117.56 €147.79

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine