Engine (3)

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

-€5.63

COLONY Clutch Adjusting Hole Cap — Silver

Replacement clutch adjuster hole cap. Made in the U.S.A.

€12.69 €18.32

-€5.07

COLONY Primary Cover Filler Caps — Silver

Clean, reliable closure for primary cover access; precision fit and easy installation. Made in the U.S.A.

€19.70 €24.77

-€5.05

CYCLE PERFORMANCE PROD. Spark Plug Indexing Washer — Kit, Bronze

Indexes spark plug electrode gap toward intake valve
Includes five 0.40" thick, five 0.50" thick, and five 0.60" thick washers
Made in the USA

€14.68 €19.73

-€3.49

COLONY Rear Master Cylinder Mounting Kit — Silver, zinc finish

Includes zinc-plated stud, bolt and washers. Kit for rear master cylinder mounting.

€13.57 €17.06

-€16.98

COLONY Head Bolt Set — 12-point, SAE, silver, zinc-plated

Replacement head bolts. Made in the USA.

€66.06 €83.04

-€16.98

COLONY Head Bolt Set — 12-point, silver zinc-plated, SAE

Replacement head bolts, made in the USA for reliable fit and durability.

€66.06 €83.04

-€6.47

COLONY Bolt and Washer Kit — fit for sprocket, Silver

Bolt and Washer Kit for specific Harley-Davidson® motorcycle models. Made in U.S.A.

€25.15 €31.62

-€6.60

COLONY Bolt and Washer Kit — Sprocket, Silver

Bolt and washer kit for select Harley-Davidson® motorcycles. Made in U.S.A.

€25.68 €32.28

-€3.53

COLONY Jiffy Stand Mounting Kit — Zinc finish

Mounting kit includes pin, clip, washers, and bushings for jiffy stand installation.

€10.00 €13.53

-€4.30

COLONY Jiffy Stand Mounting Kit — Zinc

Replacement hardware for jiffy stand: pin, clip, washers and bushings included.

€16.68 €20.98

-€2.15

COLONY Jiffy Stand Clevis Pin Pretzel Clips — Zinc, 5-pack

Reproduction of the OEM 554A clip used on many 89 and up H-D kickstands.

€6.07 €8.22

-€6.14

COLONY Rocker Cover Bolt Kit — Chrome, Silver, Polished

Replacement hardware kit for rocker cover; made in the USA.

€17.38 €23.52

-€1.96

COLONY Front Brake Rotor Torx Bolt Kit — 5/16"-18 x 7/8", Zinc

Torx-head bolts for front brake rotors. Precision fit, 5/16"-18 x 7/8" length.

€7.60 €9.56

-€2.75

COLONY Rear Fender Support Mounting Screws/Nuts — 3/8"-24 x 15/16", zinc

Reproduction set of rear fender support mounting screws and locknuts, size 3/8"-24 x 15/16", made in the USA.

€7.81 €10.56

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), Brake rotor, Chrome

-€4.34

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete hardware kit for mounting rotors, sprockets and belts; fits most H‑D brakes and drives; made in the U.S.A.

€16.90 €21.24

Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"), Chrome, Button-Head Torx

-€3.11

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"),...

Complete mounting kit for brake rotors, sprockets and belts; fits most H-D brakes, chain and belt drives. Made in the U.S.A.

€12.10 €15.21

-€8.86

COLONY Primary Cover Bolt Kit — Chrome

Replacement hardware kit for the primary cover. Made in the USA. Complete set for one cover.

€25.02 €33.88

-€59.58

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€231.72 €291.30

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), hub-mounted rotors, chrome

-€3.37

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete kit for rotor, sprocket and belt mounting; fits most H-D brakes and chain or belt drives. Includes all necessary hardware; made in the United States.

€13.13 €16.50

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine