Engine (3)

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

3-D Skull Points Cover — 0.750 in protrusion, Chrome

-€7.44

DRAG SPECIALTIES 3-D Skull Points Cover — 0.750 in protrusion, Chrome

Bold 3-D skull styling for your points cover; skull protrudes ~0.750 in for strong dimensional impact. Installs using existing mounting points.

€21.01 €28.45

-€8.32

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Bold 3-D skull styling with approximately .750" projection for a standout accent.

€23.50 €31.82

-€8.11

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Striking 3-D skull design that protrudes about 0.750"; adds custom attitude while maintaining function.

€22.92 €31.03

Die-Cast Head Bolt Covers — 4 Pack, Chrome

-€8.02

DRAG SPECIALTIES Die-Cast Head Bolt Covers — 4 Pack, Chrome

Precision die-cast head bolt covers; includes setscrews and hex wrench for easy installation.

€22.67 €30.69

-€9.79

DRAG SPECIALTIES Front Turn Signal Mount Kit — Chrome finish

Lets you mount handlebar bullet-style turn signals horizontally for a cleaner, low-profile front-end look.

€27.67 €37.46

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

-€1.34

DRAG SPECIALTIES Replacement Inspection Cover Gasket

Replacement inspection cover gasket kit including gasket and all mounting hardware. Machined construction for a precise fit and reliable seal.

€3.78 €5.12

-€14.31

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€40.44 €54.75

Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG SPECIALTIES, 01-0149

-€17.21

DRAG SPECIALTIES Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG...

High-quality exhaust gaskets for sealing exhaust interconnects and preventing leaks.

€48.61 €65.82

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€14.86

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€42.00 €56.86

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€14.34

DRAG SPECIALTIES Billet Flange Adapter for Spigot-Type Carbs — Aluminum

Allows mounting of OEM late-model CV or Mikuni HSR-42 carbs on early Evolution two-bolt flange manifolds. Mounting holes 2.75" on center. Can be polished, plated or painted.

€30.73 €45.07

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

Deluxe Engine Bolt Cover Kit — Chrome, Silver, Fits Harley-Davidson engines

-€26.52

DRAG SPECIALTIES Deluxe Engine Bolt Cover Kit — Chrome, Silver, Fits...

Covers raw OEM bolt heads on Harley-Davidson® model engines. Kit includes motor, transmission, primary and select chassis bolt covers. Easy to install; fasten with silicone (sold separately).

€74.94 €101.46

-€13.31

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Engine, Black

Covers OEM bolt heads on engine, transmission and primary
Standard and deluxe kit options
Individual covers available
Easy installation with included instructions

€37.64 €50.95

-€12.21

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Black

Covers raw OEM bolt heads on engine, transmission and primary. Standard and deluxe kit options available; individual covers sold separately. Fasten with silicone (sold separately).

€34.50 €46.71

-€12.98

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Chrome, Silver

Covers raw OEM bolt heads on engine, transmission and primary for a clean, finished look. Deluxe and individual options available. Easy installation with included instructions.

€36.68 €49.66

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine