Engine (3)

-€9.79

DRAG SPECIALTIES Front Turn Signal Mount Kit — Chrome finish

Lets you mount handlebar bullet-style turn signals horizontally for a cleaner, low-profile front-end look.

€27.67 €37.46

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€9.01

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€11.19 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€121.41

DRAG SPECIALTIES Connecting Rod Set — Heavy Duty, Steel

Reinforced replacements that meet or exceed OEM specs. Pre-assembled set with two-hole crankpin, retainers, bearings and nuts. Verify rod-to-flywheel clearance.

€343.11 €464.52

-€82.49

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€233.13 €315.62

-€84.14

DRAG SPECIALTIES Connecting Rod Assembly — 24281-83-BX-LB1Z

Heavy-duty replacement that meets or exceeds OEM specs. Complete set fitted and ready to install; includes two-hole crankpin, aluminum retainers, bearings, nuts and forged heat-treated rods.

€237.78 €321.92

Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome, Silver

-€7.36

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome,...

Precision kit for rotors with a 3.25" bolt circle. Single kit for single-disc installations; two kits required for dual-disc setups. Made in the U.S.A.

€28.63 €35.99

-€5.56

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16 thread, 25.4 mm (1")

Kit for mounting rotors to hubs; sturdy construction and made in the U.S.A.

€21.65 €27.21

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing, Silver

-€7.74

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Secure, precision fastener for motorcycle control assemblies. Made in the U.S.A.

€30.10 €37.84

-€1.60

GARDNER-WESTCOTT Fork Drain Plugs — for 41 mm tubes, chrome

Durable fork drain plugs for fast, clean oil changes. Made in the USA.

€6.24 €7.84

-€1.34

DRAG SPECIALTIES Replacement Inspection Cover Gasket

Replacement inspection cover gasket kit including gasket and all mounting hardware. Machined construction for a precise fit and reliable seal.

€3.78 €5.12

Riser Mounting Bolt Set — 2-3/4 in, hex head, chrome

-€5.19

GARDNER-WESTCOTT Riser Mounting Bolt Set — 2-3/4 in, hex head, chrome

Includes 1/2"-13 x 2-3/4" hex-head bolts with lock and cup washers. Made in the U.S.A.

€20.22 €25.41

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Silver

-€5.96

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Fits rotors with a 3.25" bolt circle. Dual disc applications require two kits. Made in the U.S.A.

€23.17 €29.13

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Torx®

-€4.21

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Complete rotor-to-hub kit for single-disc applications. Two kits required for dual-disc setups.

€16.38 €20.59

-€2.82

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 7/8 in length

Fits rotors with a 3.25" bolt circle. One kit per rotor; dual-disc setups require two kits. Made in the U.S.A.

€10.99 €13.81

Primary and Derby Cover Bolt Kit — Chrome, Steel

-€18.00

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome, Steel

Complete bolt kit for primary and derby cover service. Made in the U.S.A.

€70.01 €88.01

-€5.30

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Durable fastener engineered for secure attachment of control assemblies; precision fit and corrosion resistance.

€20.61 €25.91

Caliper Mounting Bolt Kit — Socket-head, Chrome, Kit

-€4.87

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head, Chrome, Kit

Direct replacement for OEM caliper mounting bolts and washers. Includes complete hardware for one caliper assembly. Made in the USA.

€18.92 €23.79

-€14.31

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€40.44 €54.75

Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG SPECIALTIES, 01-0149

-€17.21

DRAG SPECIALTIES Exhaust Gaskets — Exhaust Interconnect, 10-pack, DRAG...

High-quality exhaust gaskets for sealing exhaust interconnects and preventing leaks.

€48.61 €65.82

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€14.86

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€42.00 €56.86

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Primary

High-quality cam chain tensioner. Sold each.

€20.57 €27.85

Cam Chain Tensioner — Secondary, R39964-99A

-€7.28

DRAG SPECIALTIES Cam Chain Tensioner — Secondary, R39964-99A

High-quality replacement component for cam chain systems. Sold each.

€20.57 €27.85

-€9.40

KIBBLEWHITE Nitrided Valve — Head 1.805", Stem 0.2760", Length 4.420"

Stellite-tipped nitrided valve engineered to reduce wear and friction, improve flow characteristics and resist corrosion.

€26.59 €35.99

Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length 4.420"

-€13.39

KIBBLEWHITE Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction. Corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€22.60 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, 1.630" head, 4.520" length, 0.2755" stem

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, 1.630" head, 4.520" length, 0.2755"...

One-piece stellite-tipped stainless-steel nitrided valve that reduces friction and improves wear resistance. Compatible with leaded and unleaded fuels. Made in the USA.

€29.08 €36.57

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID 0.3098", Length 2.100"

-€16.29

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), ID...

Precision-machined nickel bronze valve guide providing superior wear resistance and heat conductivity. Compatible with unleaded fuel; accepts special seals (sold separately). Made in the USA.

€17.48 €33.77

-€3.46

KIBBLEWHITE Cylinder Dowels — 4 Pack, Black oxide, 83080-4

Designed for HD® Evolution OEM replacement. Machined from high‑grade metal with a corrosion‑resistant dark finish. Multipurpose alignment pins. Made in the USA.

€11.74 €15.20

-€3.89

KIBBLEWHITE Powdered Metal Valve Seats — 1.690", 0.450", Intake

High-density powdered metal seats with superior wear resistance and thermal stability; track-tested for high-RPM, multi-valve use. Made in the USA.

€11.01 €14.90

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company