Engine (3)

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

-€5.05

CYCLE PERFORMANCE PROD. Spark Plug Indexing Washer — Kit, Bronze

Indexes spark plug electrode gap toward intake valve
Includes five 0.40" thick, five 0.50" thick, and five 0.60" thick washers
Made in the USA

€14.68 €19.73

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

-€59.58

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€231.72 €291.30

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€10.58

WISECO Replacement Ring Set — 3.498" piston diameter, +0.060" oversize

Includes rings for one piston only. Fits only Wiseco pistons. Confirm fitment before purchase.

€29.93 €40.51

-€10.58

WISECO Replacement Ring Set — 3.508" piston, +0.010" bore oversize

Includes rings for one piston only. Fits only matching pistons. Check service manual for installation specs.

€29.93 €40.51

Replacement Ring Set — 3.518" piston diameter, +0.020" bore oversize

-€10.58

WISECO Replacement Ring Set — 3.518" piston diameter, +0.020" bore...

Set includes rings for one piston; fits matching pistons only.

€29.93 €40.51

-€0.64

WISECO Replacement Circlip — 20 mm outside diameter, pair

High-strength, easy-to-install circlips forged from high-silicon alloy; designed to fit only Wiseco pistons. Sold as a pair.

€1.83 €2.47

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine