Engine (3)

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), Brake rotor, Chrome

-€4.34

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete hardware kit for mounting rotors, sprockets and belts; fits most H‑D brakes and drives; made in the U.S.A.

€16.90 €21.24

Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"), for cast rear wheel, Chrome

-€3.11

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"),...

Complete hardware kit for mounting brake rotors, sprockets and belt drives. Includes all necessary hardware and fits virtually all H-D brakes, chain and belt drives.

€12.10 €15.21

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), hub-mounted rotors, cast front wheel, Chrome

-€3.37

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete mounting hardware kit for rotor, sprocket and belt drives. Fits most H-D brakes and drives; includes all necessary hardware. Made in the U.S.A.

€13.13 €16.50

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8 in), Chrome

-€4.17

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8...

Complete mounting hardware kit for rotor, sprocket and belt drives. Fits most Harley‑Davidson applications. Includes all necessary hardware. Made in the U.S.A.

€16.22 €20.39

Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm (1-3/4"), fits cast front and rear wheels, chrome

-€4.08

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm...

Complete kit with all hardware to mount rotors, sprockets and belts; fits virtually all H-D brake and drive systems. Made in the U.S.A.

€11.52 €15.60

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2 in), Sprocket & Belt Pulley, Chrome

-€6.02

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete hardware kit for installing rotors, sprockets and belt drives; fits most H-D brakes and drives.

€23.36 €29.38

Rotor, Sprocket and Belt Mounting Hardware Kit — 31.8 mm (1-1/4"), Chrome, kit

-€5.16

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 31.8 mm...

Complete mounting hardware kit for brake rotors, sprockets and belt pulleys; fits most H-D brakes and drives.

€20.02 €25.18

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2"), chrome polished

-€5.16

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete mounting hardware kit for rotor, sprocket and belt assemblies; fits most H-D brakes, chains and belt drives.

€20.02 €25.18

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

Replacement Rocker Shaft End Plugs and Nuts — Rocker shaft, Silver chrome, Kit

-€9.48

COLONY Replacement Rocker Shaft End Plugs and Nuts — Rocker shaft,...

Complete stock-style replacement plugs, nuts, and washers. Made in the U.S.A.

€36.88 €46.36

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€2.75

COLONY OEM-Style Oil Pump Plug — Chrome

Precision OEM-style oil pump plug for reliable sealing and easy installation. Made in the USA.

€7.80 €10.55

-€2.61

COLONY Tappet Adjuster Locknuts — 4-pack

Split locknuts with 9/32"-32 thread; made in the U.S.A.

€7.39 €10.00

-€14.73

COLONY Replacement Aluminum Pushrods — Set of 4

Aircraft-grade pushrods with heat-treated steel tips; fits stock stroke lengths.

€57.31 €72.04

-€17.48

COLONY Replacement Cylinder Stud Set — 8-pack

Heat-treated studs that meet or exceed original equipment standards for reliable clamping and long service life.

€67.95 €85.43

-€16.93

COLONY Twin Cam Quick Install Lower Pushrod Tube Kit — 4-pack, lower

Kit that provides four short lower tubes and clips for easy access to the adjuster and lock nuts when installing adjustable pushrods on Twin Cam motors.