Engine (3)

Solid PC Valve Guide Seals — 5/16" stem, 0.517" length, 0.510" outside diameter, PTFE, 4 Pack

-€3.64

KIBBLEWHITE Solid PC Valve Guide Seals — 5/16" stem, 0.517" length, 0.510"...

Kibblewhite Solid PC valve guide seals feature a twin spring design for continuous tension and low-friction performance. Made in the USA.

€10.27 €13.91

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length, stainless steel

-€5.91

KIBBLEWHITE Nitrided Valve — 1.840" head, 0.3100" stem, 4.445" length,...

One-piece stellite-tipped nitrided valve for reduced wear, improved flow, and corrosion resistance. Made in the USA.

€21.47 €27.38

Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length, 17° tulip angle

-€5.93

KIBBLEWHITE Nitrided Valve — 1.565" head, 0.3095" stem, 4.505" length, 17°...

Stellite-tipped nitrided valve for improved wear resistance, reduced friction, and corrosion protection. Made in the USA.

€22.99 €28.92

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445" length, Intake

-€14.36

KIBBLEWHITE Nitrided Valve — Oversize, 0.3100" stem, 2.000" head, 4.445"...

One-piece nitrided valve with stellite tip and nitrided surface (.002" depth, .0002" buildup) for superior wear resistance, corrosion protection, and improved flow. Compatible with leaded and unleaded fuels. Made in the USA.

€48.81 €63.17

-€9.07

KIBBLEWHITE C630 Valve Guides — 1.77" length, 0.3375" ID

Precision-machined bronze construction for durability
Tapered nose to reduce port obstruction and improve flow
Compatible with unleaded fuel and a range of valve‑stem materials
Accepts top‑hat valve seals (sold separately)
Made in the USA

€25.65 €34.72

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

-€2.35

KIBBLEWHITE Shouldered Cast Iron Valve Guide — ID 0.3098 in, Length 2.100 in

Precision-machined, compatible with no-lead fuel and all valve-stem materials; accepts special valve guide seals (sold separately); made in the USA.

€7.03 €9.38

Shouldered Cast Iron Valve Guide — 2.100" length, 0.3098" inside diameter

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 2.100" length, 0.3098"...

Precision-machined valve guide accepts special seals and works with no-lead fuel; made in the U.S.A.

€7.60 €10.28

-€2.68

KIBBLEWHITE Cast Iron Valve Guide — ID 0.3098" , OD 0.5620" , L 2.400"

Precision-machined cast iron valve guide compatible with lead-free fuel; accepts any valve-stem material. Sold each.

€7.60 €10.28

Shouldered Cast Iron Valve Guide — Oversize (+0.001 in), Inside diameter 0.3098 in, Length 2.100 in

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001 in),...

Precision-machined valve guide compatible with no-lead fuel; accepts special seals. Made in USA.

€7.60 €10.28

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), Length 2.100", ID 0.3098"

-€2.86

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), Length...

Precision-machined cast iron construction; compatible with no-lead fuel; accepts special seals (sold separately); made in USA.

€8.01 €10.87

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

Shouldered Cast Iron Valve Guide — Oversize (+0.004"), 2.10", ID 0.3098"

-€2.41

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.004"), 2.10",...

Precision-machined cast iron valve guide with shouldered design; compatible with unleaded fuel and a variety of valve-stem materials. Made in USA.

€7.20 €9.61

Cast Iron Valve Guide — Oversize (+0.004"), 0.3098" ID, 2.400" length

-€2.34

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.004"), 0.3098" ID, 2.400"...

Precision-machined cast iron valve guide compatible with no-lead fuel; made in the USA.

€7.97 €10.31

-€10.29

KIBBLEWHITE C630 Valve Guides — 2.40", 0.562" OD, 0.3095" ID

C63000 bronze, precision OEM-style valve guides with tapered nose for improved flow; accept OEM top-hat seals. Sold each.

€29.15 €39.44

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), ID 0.3745", L 1.855", Special Shouldered

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), ID...

Precision cast-iron valve guide compatible with unleaded fuel; accepts special valve guide seals (sold separately).

€5.54 €8.22

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), Length 1.855", Inside diameter 0.3745"

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), Length...

Precision-machined valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the USA.

€7.38 €9.98

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

C630 Valve Guides — Oversize (+0.002"), 2.40" length, 0.3095" ID

-€10.14

KIBBLEWHITE C630 Valve Guides — Oversize (+0.002"), 2.40" length, 0.3095" ID

Oversize C630 valve guides with tapered nose for improved flow; OEM-style fitment and long service life; made in USA.

€28.69 €38.83

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine