Engine (3)

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

-€59.58

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€231.72 €291.30

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€10.79

JAMES GASKET Metal Base Gaskets — Cylinder base, 0.79 mm (0.031")

Silicone-beaded base gaskets that resist brittleness, require no sealer, and are made in the USA.

€36.72 €47.51

-€15.50

JAMES GASKET Top End Gasket Kit — 0.80 mm (0.030"), 1.14 mm (0.045")

Complete set of gaskets, oil seals and O-rings for top-end engine rebuilds. Made in the USA.

€43.85 €59.35

-€2.86

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer oil pump O-ring for reliable, leak-free sealing. Easy to install.

€9.73 €12.59

-€4.64

JAMES GASKET Starter O-Ring — Starter housing, 25-pack

Reliable seal for starter assemblies. Made in the U.S.A.

€15.80 €20.44

Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

-€6.15

JAMES GASKET Primary to Transmission Gasket — 0.80 mm (0.030"), 10 Pack

Flexible MicroPore paper gasket offering high fluid resistance and reliable sealing; made in the U.S.A.

€20.91 €27.06

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

Replacement Cylinder Head and Compliance Fitting Gaskets — 1.14 mm, 5 pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Replacement sealing set for engine assemblies. Made in the USA. Provides reliable sealing for maintenance and repairs.

€70.27 €90.94

-€3.74

JAMES GASKET Oil Pump O-Ring — 25 pack

Replacement outer sealing ring for pump leak prevention. Durable elastomer construction. Sold in multi-quantity packs for maintenance needs.

€9.41 €13.15

Replacement Cylinder Head and Compliance Fitting Gaskets — Bore 3.625" , Thickness 1.14 mm (0.045"), 5-pack

-€20.67

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

High-quality replacement gaskets for cylinder head and compliance fittings, manufactured to consistent standards for dependable sealing.

€70.27 €90.94

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€16.90

JAMES GASKET Primary Gasket — Primary Cover, 1.60 mm (0.062")

Top-quality sealing with silicone beading for improved leak resistance. Made in the USA.

€57.47 €74.37

-€3.98

JAMES GASKET Shifter Shaft Seal — shifter shaft, chain cover, 10-pack

Durable replacement seal that restores smooth shifting and prevents leaks.

€13.53 €17.51

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

Cylinder Head/Base Gasket Kit — Standard bore, 0.51 mm (0.020 in), head and base

-€13.87

JAMES GASKET Cylinder Head/Base Gasket Kit — Standard bore, 0.51 mm (0.020...

Genuine James kit with matching head and base gaskets and O-rings where applicable. Made in the USA.

€47.16 €61.03

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€98.37

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€51.96

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine