Engine (3)

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€50.40

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 €246.80

Complete Stock Hardware Kit — 8301 CAD, Engine, Cadmium plated

-€66.41

COLONY Complete Stock Hardware Kit — 8301 CAD, Engine, Cadmium plated

Contains all stock motor nuts, bolts, washers and studs; meets or exceeds original H-D specifications; made in the USA.

€209.55 €275.96

Ignition Cover Timer Stud Kit — Silver, zinc finish, pair

-€3.41

COLONY Ignition Cover Timer Stud Kit — Silver, zinc finish, pair

Reproduction studs for original ignition timer covers; made in the U.S.A. and built for reliable, period-correct fit.

€9.65 €13.06

Ignition Cover Timer Stud Kit — Pair, Silver, Zinc

-€3.41

COLONY Ignition Cover Timer Stud Kit — Pair, Silver, Zinc

Reproduction ignition timer cover studs made in the U.S.A. Durable, exact-fit replacements for restoration and repair.

€9.65 €13.06

-€2.68

COLONY Wheel Hub Outer Screw Kit — Cadmium-plated silver

Includes round head screws and washers. Made in the USA. Ready-to-install wheel hub outer screw kit.

€3.86 €6.54

Wire/Cable Clip — Wire/Cable/Rear Frame, Black, Parkerized, 2449-1

-€3.49

COLONY Wire/Cable Clip — Wire/Cable/Rear Frame, Black, Parkerized,...

High-quality reproduction clip for custom wiring applications. Made in the USA.

€9.85 €13.34

-€3.49

COLONY Wire/Cable Clip — Black, Parkerized

High-quality reproduction for securing wires and cables. Made in the USA.

€9.85 €13.34

-€3.49

COLONY Wire/Cable Clip — Black, Parkerized

Durable reproduction for custom applications. Made in the USA.

€9.85 €13.34

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€4.78

COLONY Shifter Lever Stud and Bushing Kit — Silver, Steel

Complete kit with all hardware to mount the shifter lever by hand, plus a wave washer to reduce rattling. Made in the U.S.A.

€10.77 €15.55

Brake Drum Wheel Mounting Socket Screw Set — 3/8-20 socket head, parkerized black

-€5.55

COLONY Brake Drum Wheel Mounting Socket Screw Set — 3/8-20 socket...

Reproduction mounting kit with chip curls at the socket hole bottom, reproduction of hardened 3/8"-20 bolts, made in the U.S.A.

€21.60 €27.15

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

-€6.50

COLONY Transmission Top Cover Screw Kit — Chrome

OEM duplicate for mounting the transmission top cover. Made in the USA.

€25.32 €31.82

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

-€5.63

COLONY Clutch Adjusting Hole Cap — Clutch, Silver, Aluminum

Protects the clutch adjusting opening and gives a clean, finished appearance. Easy press-fit installation.

€12.69 €18.32

-€5.07

COLONY Primary Cover Filler Caps — Silver

Precision-machined filler caps that complete the primary cover with a clean, finished look. Made in the U.S.A.

€19.70 €24.77

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine