Engine (3)

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€47.62

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€185.22 €232.84

-€36.91

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€143.55 €180.46

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€35.43

JIMS Hydrosolid Tappets — 0.8425" diameter

Performs like hydraulic to 5,500 rpm then becomes solid, adding ~3–6 hp and preventing hydraulic pump-up. Made in the U.S.A.; requires adjustable pushrods.

€137.81 €173.24

-€48.84

JIMS Hydrosolid Tappets — Diameter 0.9035"

Performs like a hydraulic tappet to 5500 rpm, then converts to a solid tappet for an additional 3 to 6 usable hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€26.20

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€101.89 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

-€31.17

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

-€9.44

JIMS Oil Pump Component — 26346-69/70

Replacement oil pump component for Big Twin models.

€36.69 €46.13

Oil Pump Component — Idler gear, 26317-68A

-€12.82

JIMS Oil Pump Component — Idler gear, 26317-68A

Replacement component for Big Twin models; precision-machined to restore lubrication performance and reduce noise.

€49.89 €62.71

-€14.02

JIMS Oil Pump Component — JIMS idler gear

Replacement component for Big Twin lubrication systems. Precision‑machined for durability and proper fit.

€54.52 €68.54

-€7.44

JIMS Gear-Side Pinion Shaft Nut — 5/8-24

High-strength pinion shaft nut designed for secure gear-side installation and long service life.

€28.92 €36.36

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

-€6.48

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

High-Performance Piston Kit — 3.5155" piston, 4.25" stroke, 1340 cc

-€86.89

WISECO High-Performance Piston Kit — 3.5155" piston, 4.25" stroke,...

Complete top-end piston kit with forged pistons, rings, retainer clips and chrome piston pins, plus a full X‑Ring package.

€245.85 €332.74

High-Performance Piston Kit — Bore 3.508", Oversize +0.010", Stroke 3-13/16", Compression 9.5:1, 1200 cc

-€92.69

WISECO High-Performance Piston Kit — Bore 3.508", Oversize +0.010",...

Complete top-end kit with forged aluminum pistons, X-Ring package, rings, retainer clips and chrome piston pins for reliable performance.

€262.24 €354.93

High-Performance Piston Kit — Bore 3.508", Stroke 4-1/4", 1340 cc, Aluminum

-€92.69

WISECO High-Performance Piston Kit — Bore 3.508", Stroke 4-1/4", 1340...

Complete top-end piston kit with X-Ring package and all necessary installation hardware.

€262.24 €354.93

-€0.64

WISECO High-Performance Replacement Circlips — Piston

High-strength replacement circlips for piston applications. Includes rings for one piston. Forged from a high-silicone aluminum alloy for durability and dimensional consistency.

€1.83 €2.47

High-Performance Piston Kit — 3.195" piston diameter, 10.0:1 compression ratio, Aluminum

-€83.64

WISECO High-Performance Piston Kit — 3.195" piston diameter, 10.0:1...

Forged high-silicon aluminum piston kit with pistons, rings, retainer clips and chrome pins. Includes X-Ring set; pistons made in the USA.

€216.00 €299.64

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

High-Performance Piston Kit — 3.4955 in piston diameter, 10.5:1 compression, 1200 cc displacement

-€93.31

WISECO High-Performance Piston Kit — 3.4955 in piston diameter,...

Complete top-end piston rebuild kit with X-Ring package and hardware. Made in the USA.

€264.01 €357.32

Piston Kit with Gaskets — Piston diameter 3.934", Displacement 1746 cc

-€152.67

WISECO Piston Kit with Gaskets — Piston diameter 3.934", Displacement...

Forged high-silicon aluminum pistons with Armor Plating; kit includes pistons, pins, retainer clips, top-end gasket kit and VM-Rings. Made in USA.

€431.93 €584.60

-€115.92
Out of Stock

WISECO Piston Kit — 3.937", 4-3/8", 11:1, 1746 cc

ArmorX™-coated pistons with ArmorFit™ skirt coating for smooth, quiet operation. Includes pistons, rings, pins and circlips. Made in the U.S.A.

€327.99 €443.91

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company