Engine (3)

-€419.97
Out of Stock

S&S CYCLE 91 cc Super Stock® Cylinder Heads — Powder-coated Wrinkle Black

High-flow 91 cc Super Stock® cylinder heads for S&S® T-Series T2 long block engines; supports up to .650" cam lift and fits stock rocker boxes and manifolds when used with appropriate hardware.

€1,633.25 €2,053.22

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62
Out of Stock

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

Oil Hose Upgrade Kit — 91 cm (3'), Black

-€15.41
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 91 cm (3'), Black

Performance oil hose upgrade kit with easy installation; includes hose separators and four hose finishers with worm-drive clamps. Made in USA.

€59.94 €75.35

-€115.92
Out of Stock

WISECO Piston Kit — 3.937", 4-3/8", 11:1, 1746 cc

ArmorX™-coated pistons with ArmorFit™ skirt coating for smooth, quiet operation. Includes pistons, rings, pins and circlips. Made in the U.S.A.

€327.99 €443.91

Oil Hose Upgrade Kit — 91 cm (3'), stainless steel

-€15.41
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 91 cm (3'), stainless steel

Braided performance oil hoses and easy-install finishers for a racy, track-ready upgrade. Includes hose separators and clamp-integrated finishers. Made in the USA.

€59.94 €75.35

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

Piston Kit — Bore +0.143", Stroke 4-3/8", Compression 11.0:1, 1875 cc

-€115.92
Out of Stock

WISECO Piston Kit — Bore +0.143", Stroke 4-3/8", Compression 11.0:1,...

High-performance piston kit engineered to improve combustion, reduce wear and provide reliable OEM and Screamin’ Eagle fitment. Includes pistons, rings and hardware.

€327.99 €443.91

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke, 11:1 compression

-€114.36
Out of Stock

WISECO Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke,...

High-performance Wiseco piston kit with ArmorX™ coating and ArmorFit™ skirt. Includes pistons, rings, piston pins and circlips. Fits OEM and Screamin’ Eagle heads. Made in the U.S.A.

€323.56 €437.92

-€115.92
Out of Stock

WISECO Piston Kit — 4.250" bore, 4-3/8" stroke, 11.0:1 compression

Two-piston kit with rings, piston pins and circlips. ArmorX™ coating and ArmorFit™ skirt reduce wear and noise while improving sealing; fits OEM and Screamin’ Eagle heads.

€327.99 €443.91

-€6.94
Out of Stock

S&S CYCLE Oil Filter Fitting — Steel, Straight fitting

Compact connector for oil filter installation; provides reliable sealing and easy maintenance.

€19.66 €26.60

Oil Hose Upgrade Kit — 15 cm (6 in), Black

-€19.82
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 15 cm (6 in), Black

Braided, track-ready oil hoses that deliver a racy look and simple installation; kit includes two hose separators and four hose finishers with clamps.

€77.03 €96.85

Oil Hose Upgrade Kit — 15 cm (6") stainless steel

-€19.82
Out of Stock

JAGG OIL COOLERS Oil Hose Upgrade Kit — 15 cm (6") stainless steel

Enhances appearance and oil routing with an easy-install kit; includes hose separators and finishers with worm-drive clamps.

€77.03 €96.85

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28
Out of Stock

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78
Out of Stock

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

-€7.36
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Chrome

OEM-style oil feed line that accepts all OEM connectors and retainers.

€20.81 €28.17

-€18.74
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Oil return line

OEM-style replacement; accepts all OEM connectors and retainers.

€52.98 €71.72

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

-€19.30
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — Chrome

OEM-style replacement component that accepts all OEM connectors and retainers for a secure fit.

€54.55 €73.85

-€15.64
Out of Stock

DRAG SPECIALTIES Chrome Oil Line — T03-0163

OEM-style replacement that accepts all OEM connectors and retainers for a direct fit.

€44.19 €59.83

-€1.03
Out of Stock

DRAG SPECIALTIES Oil Drain Elbow — Black, Rubber

Directs used oil cleanly into a drain pan to minimize spills during oil changes.

€2.91 €3.94

Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°, Exhaust Lift 0.630"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°,...

High-performance camshaft that preserves low-end rideability while delivering strong mid and top end power. Requires supporting upgrades and professional tuning.

€366.15 €460.30

-€107.90
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"-1-1/4" frame tubing, 305 mm (12"), Chrome

Complete oil cooler kit with AN #6 fittings, frame-mount clamps and reducers, CNC-machined billet aluminum construction.

€304.91 €412.81

Tracker Series™ Piston Kit — 3.937" bore, 4.375" stroke, 1746 cc

-€72.30
Out of Stock

WISECO Tracker Series™ Piston Kit — 3.937" bore, 4.375" stroke, 1746 cc

Race-proven forged pistons with ArmorGlide® skirt coating. Complete two-piston kit including rings, pins and circlips.

€204.57 €276.87

Hose Clamp — 3/8" (9.5 mm), 10-pack, Black

-€2.93
Out of Stock

JAGG OIL COOLERS Hose Clamp — 3/8" (9.5 mm), 10-pack, Black

Worm-drive clamp for secure, adjustable connections in custom oil cooler installations.

€11.36 €14.29

Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°, Lift 0.630", Chain, Pair

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°,...

Aggressive performance cam that preserves low‑end while delivering strong mid and top end power; requires intake/exhaust tuning and valvetrain upgrades.

€366.15 €460.30

-€94.39
Out of Stock

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12")

Compact oil cooler kit with AN #6 fittings, supplied clamps and reducers, and precision-machined components for durable, easy installation.

€266.80 €361.19

-€27.33
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — FEULING PARTS, 2065, Standard

Complete camshaft installation kit with bearings, ARP bolts, gaskets and seals. Made in the U.S.A.

€106.26 €133.59

-€17.37
Out of Stock

KURYAKYN Oil Cooler Cover — Chrome

Bolt-on oil cooler cover installs like the stock factory cover. Durable, lightweight design for a refined appearance.

€67.56 €84.93

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine