Engine (3)

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78
Out of Stock

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64
Out of Stock

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€44.64
Out of Stock

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€39.78
Out of Stock

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV7 Cam — 266° duration, 0.560" lift

Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — EV38 grind, Exhaust 252°, Intake 238°

Performance cam for Big Twin street and drag bikes. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV51 Cam — Intake 252°, Exhaust 256°, 0.510" lift

Broad-range EV51 camshaft for modified street motors. 3000–6500 rpm powerband, easy install, works with stock hydraulics. Made in USA. Check clearances.

€202.28 €254.30

-€18.12
Out of Stock

ANDREWS Valve Spring Upper Collars — 4-pack

Adds 0.050" more spring travel than stock. Stronger and lighter than stock. Uses stock keepers. Made in the United States.

€70.48 €88.60

-€249.64
Out of Stock

JIMS Roller Rocker Arms — Set of 4, front and rear

Precision-cast 4340 chromoly roller rocker arms that reduce valve train friction and increase top-end horsepower. Set includes two front and two rear rocker arms.

€970.82 €1,220.46

-€47.82
Out of Stock

ANDREWS Adjustable Pushrod Kit — Chromoly Steel, ANDREWS

Adjustable pushrod kit for precise valve-lash setup. Rocker boxes must be removed for installation. Made in the U.S.A.

€185.98 €233.80

-€28.75
Out of Stock

ANDREWS Replacement Pushrod Kit — Aluminum, Set of 4

Fits Shovel engines using stock diameter tubing. For stock stroke applications. Made in the U.S.A.

€111.81 €140.56

-€40.73
Out of Stock

JIMS Hydrosolid Tappets — 0.8420 in, Part No. 1820

Performs as a hydraulic tappet up to 5,500 rpm, then converts to solid for an estimated 3–6 usable hp; prevents hydraulic pump and requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

$Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\" diameter$

-€47.80
Out of Stock

JIMS Powerglide II Hydraulic Tappets — Oversize +0.005\", 0.8470\"...

High-capacity hydraulic tappets developed for increased load, lubrication and service life; billet body and wider rollers.

€185.91 €233.71

-€46.22
Out of Stock

JIMS Powerglide™ Steady Roll Tappets — Standard, Hydraulic, JIMS 1827

Hydraulic tappets with a Steady Roll bronze bushing replacing the needle roller; increased load, lubrication and life capacities; billet steel body and hand-honed hydraulic cavity.

€179.76 €225.98

-€131.44
Out of Stock

JIMS Solid Adjustable Tappet Kit — JIMS 5525

4340 chromoly pushrods with solid adjustable tappets for aggressive cam profiles and high RPM; made in the U.S.A.

€511.17 €642.61

-€16.85
Out of Stock

PRO-ONE PERF.MFG. Millennium Points Cover — Chrome

Custom aluminum cover with ball-milled finish. Sold individually.

€47.61 €64.46

-€18.53
Out of Stock

PRO-ONE PERF.MFG. Chrome Billet Inspection Cover — Smooth

Polished chrome billet inspection cover in ball-end milled or smooth style; includes chrome hardware. Sold each.

€52.38 €70.91

Chrome Billet Inspection Cover — Chrome, Ball-milled, with Forward Controls

-€18.53
Out of Stock

PRO-ONE PERF.MFG. Chrome Billet Inspection Cover — Chrome, Ball-milled, with...

Billet-style inspection cover with included mounting hardware. Sold individually.

€52.38 €70.91

Flow Pro 1 Billet Oil Pump Complete Assembly — Black, 6061 billet aluminum

-€193.92
Out of Stock

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Black, 6061...

Complete oil pump kit with CNC-machined feed and return gears. Includes all internal components; check motor case thread size before installation. '73–'80 may require drilling (PART #DS-179009 sold separately).

€754.16 €948.08

-€48.87
Out of Stock

PRO-ONE PERF.MFG. Motor Mount — Chrome

Precision-machined motor mount with triple show-chrome plating. Includes mounting hardware; ignition/starter switch sold separately.

€138.15 €187.02

-€26.76
Out of Stock

ANDREWS Pushrod Kit — Set of 4, Fixed length

Super-light, heavy-duty fixed-length pushrods; sold as a set of four to replace OE—two intake, two exhaust. Rocker boxes must be removed for installation.

€104.06 €130.82

-€47.82
Out of Stock

ANDREWS Adjustable Pushrods — 4 Pack

Replaces nonadjustable stock rods on H-D engines for precise valvetrain control.

€185.98 €233.80

-€9.21
Out of Stock

JIMS Rocker Arm Shaft — JIMS, 17611-83

Precision-machined replacement to restore valve-train alignment. Made in the U.S.A.

€35.82 €45.03

-€28.51
Out of Stock

JIMS Crank Pin — 23960-54, Silver

Quality replacement that meets or exceeds OEM specifications. Made in the U.S.A.

€110.85 €139.36

-€24.78
Out of Stock

JIMS Rod Race Set — Copper

Precision rod race set machined from 52100 Timken® bearing stock. Made in the U.S.A.

€96.39 €121.17

-€167.20
Out of Stock

JIMS Aluminum Lifter Blocks — Pair, Aluminum finish

Kits include front and rear lifter blocks plus gaskets. Mounting screws sold separately; 53-65 models use 1/4"-24 screws. Made in the U.S.A.

€650.23 €817.43

-€37.12
Out of Stock

JIMS Motor Sprocket Shaft — JIMS, 24001-56

Precision motor sprocket shaft designed for reliable power transfer and long service life. Made in the U.S.A.

€144.38 €181.50

-€37.40
Out of Stock

JIMS Right-Side Crankcase Bushing — Standard Size, 24599-40

Precision right-side crankcase bushing with 360° oiling and U.S.-made construction.

€145.42 €182.82

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine