Engine (3)

-€723.44

S&S CYCLE Top End Kit — 3-1/2" bore, 80", 8.0:1

Complete top-end kit with S&S Shovelhead-style heads, stock-bore cylinders, pre-fit forged pistons, hardware and gaskets. Made in USA.

€2,813.38 €3,536.82

-€419.97

S&S CYCLE 91 cc Super Stock® Cylinder Heads — Powder-coated Wrinkle Black

High-flow 91 cc Super Stock® cylinder heads for S&S® T-Series T2 long block engines; supports up to .650" cam lift and fits stock rocker boxes and manifolds when used with appropriate hardware.

€1,633.25 €2,053.22

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

132" Power Package Engine Performance Kit — Bore 4.320", Stroke 4.500", Black Granite

-€661.57

S&S CYCLE 132" Power Package Engine Performance Kit — Bore 4.320",...

Complete performance kit that converts the 114" or 117" water-cooled M8 to 132", with matched big-bore cylinders, performance 550 cam, MLS head gaskets, debris protection, and retained original serial numbers. Made in the USA.

€2,572.82 €3,234.39

-€6.94

S&S CYCLE Oil Filter Fitting — Steel, Straight fitting

Compact connector for oil filter installation; provides reliable sealing and easy maintenance.

€19.66 €26.60

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

-€111.01

S&S CYCLE Billet Tappet Guides — Kit, Chrome

Precision-machined replacement set for stock-style crankcases; sold in pairs; made in the U.S.A.

€431.74 €542.75

-€111.66

S&S CYCLE Piston Kit for Super Stock® Heads — 80 cu in, Bore 3.500 in

For S&S® Super Stock® Heads only. Kit includes pistons, rings, wrist pins, and circlips. Made in the USA.

€434.24 €545.90

Piston Kit for Super Stock® Heads — 80", 3.500" bore, 4.250" stroke

-€114.09

S&S CYCLE Piston Kit for Super Stock® Heads — 80", 3.500" bore, 4.250"...

Complete piston kit for S&S® Super Stock® Heads; includes pistons, rings, wrist pins, and circlips. Deck height 1.3750" for 80" engine. Made in the USA.

€443.67 €557.76

-€121.44

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Temporarily reduces crank compression for easier starts, bolt-in kit that increases power from 3200–5700 rpm; includes camshafts and hardware. Installer must verify clearances. Not for models with OEM compression releases.

€472.27 €593.71

-€112.20

S&S CYCLE 585 Easy Start Camshaft Kit — 88–124 CID, 585 Series grind

Easy-start camshaft kit for select 88–124 CID engines. Bolt-in installation; includes required hardware. Installer must verify clearances.

€436.38 €548.58

-€222.31

S&S CYCLE 551 Easy Start Camshaft Kit — Easy Start, Gear

Easy-start camshaft kit that reduces compression at startup for easier cranking; bolt-in for stock or mildly modified Touring models. Includes camshafts and installation hardware. Not for models with OEM compression releases.

€864.53 €1,086.84

-€240.61

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear type

Eases cold starts by reducing starting compression; bolt-in kit with all required hardware. Not for models with OEM compression releases.

€935.67 €1,176.28

-€99.53

S&S CYCLE Piston Kit 80" Stock Big Twin — 80", 3.530", 4-1/4"

Forged piston kit for stock Big Twin motors; includes pistons, rings, wristpins, and clips. Made in the U.S.A.

€387.03 €486.56

-€99.53

S&S CYCLE Forged 3-5/8" Bore Piston Kit — 3.625" bore, standard

Forged pistons for superior strength and durability.

Modern alloys and skirt profiles reduce noise and extend engine life.

Includes pistons, rings, wristpins, and clips.

€387.03 €486.56

-€91.87

S&S CYCLE Forged 3-5/8" Bore Piston Kit — +0.010" oversize

Forged pistons for superior strength; includes pistons, rings, wristpins and clips.

€357.27 €449.14

-€97.10

S&S CYCLE Forged 3-5/8" Bore Piston Kit — 3.645", +0.020"

Forged pistons for superior strength. Modern alloys and low-noise skirt profiles. Kit includes pistons, rings, wristpins, and clips.

€377.58 €474.68

-€99.53

S&S CYCLE Forged 3-5/8" Bore Piston Kit — Bore 3.655", Oversize +0.030"

Forged piston kit with modern alloys; includes pistons, rings, wristpins, and clips.

€387.03 €486.56

570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°, Intake 240°

-€93.94

S&S CYCLE 570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°,...

Designed for 88"–103" CID engines (9:1–10:1). Delivers strongest power from 3200–3700 rpm. Kit includes camshafts and installation components. Installer must verify clearances; requires high lift valve springs.

€365.33 €459.27

Piston Kit for Hot Set Up Kit® — 4.125" bore, 111 cu in, 117 cu in, 124 cu in

-€148.67

S&S CYCLE Piston Kit for Hot Set Up Kit® — 4.125" bore, 111 cu in, 117...

Complete kit with pistons, rings, wristpins, and clips. Deck height 1.050". Fits up to 4-5/8" stroke. Made in the USA.

€585.33 €734.00

Piston Kit for Hot Set Up Kit® — Bore 4.125", Oversize +0.010", Deck height 1.050", Fits up to 4-5/8" stroke

-€143.22

S&S CYCLE Piston Kit for Hot Set Up Kit® — Bore 4.125", Oversize...

Complete set with forged pistons, rings, wristpins, and clips; made in the USA. Deck height 1.050", fits up to 4-5/8" stroke.

€556.97 €700.19

Piston Kit for Hot Set Up Kit® — Bore 4.125", +0.020" oversize, 111/117/124 cu in

-€143.22

S&S CYCLE Piston Kit for Hot Set Up Kit® — Bore 4.125", +0.020"...

Complete kit with forged pistons, rings, wristpins, and clips. Made in the USA. Deck height 1.050"; fits up to 4-5/8" stroke.

€556.97 €700.19

-€130.32

S&S CYCLE Cam Cover Kit — Silver, Natural

Precision-machined castings; inner functional cover with decorative bolt-on outer cover; internal breather passage vents the crankcase; accepts points or electronic ignition systems; made in the U.S.A.

€368.39 €498.71

-€124.61

S&S CYCLE High Compression Piston Kit — 4.010" bore, 110 cu in, 10.6:1

Performance upgrade with precise deck height and wristpin fit; not compatible with twin cooled or '17 touring models.

€484.59 €609.20

Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in, 10.3:1

-€121.37

S&S CYCLE Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in,...

Forged big-bore piston kit compatible with stock rods; cylinders may require boring for proper fit. Precision-made for correct clearances.

€472.00 €593.37

Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8", Compression 10.4:1, Displacement 107"

-€121.37

S&S CYCLE Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8",...

Durable forged pistons for big bore builds. Compatible with stock rods with tapered wristpin ends. Cylinders may be bored to fit; machine to nominal diameter for correct clearance.

€472.00 €593.37

$Piston Kit for S&S Motors — Bore 3.875\", Oversize +0.005\", 103 cu in$

-€111.18

S&S CYCLE Piston Kit for S&S Motors — Bore 3.875\", Oversize +0.005\",...

Complete piston kit includes pistons, rings, wrist pins and clips for a full motor replacement. Made in the U.S.A.

€432.34 €543.52

Piston Kit for S&S Motors — Bore 3.875", Displacement 103", Oversize +0.010"

-€111.18
Out of Stock

S&S CYCLE Piston Kit for S&S Motors — Bore 3.875", Displacement 103",...

Complete piston kit with forged pistons, rings, wrist pins and clips. Made in the U.S.A.

€432.34 €543.52

-€112.20

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€2.41

S&S CYCLE Wrist Pin Circlips — 0.927 in, 4-pack

Precision circlips for 0.927 in wristpins. Made in the U.S.A.

€9.39 €11.80

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine