Engine (3)

-€10.46
Out of Stock

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Rear, Chrome

Replaces OEM caliper mounting bolts and washers. Made in the USA.

€40.65 €51.11

-€1.40

GARDNER-WESTCOTT Timing Cover Bolt Kit — C-20-37, Chrome

Complete bolt kit for timing cover installation. Includes necessary fasteners for a secure fit; easy to install.

€5.48 €6.88

V-Twin Top End Gasket Kits — Bore 4.125", Fits 1450–1800 cc, Thickness 0.51 mm (0.020")

-€32.25

COMETIC V-Twin Top End Gasket Kits — Bore 4.125", Fits 1450–1800 cc,...

EST (Extreme Sealing Technology) gasket kit with embossed stainless steel head, base, and rocker gaskets. Contains all gaskets, seals, and O‑rings to rebuild the top end. Made in the USA.

€91.25 €123.50

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing

-€7.48

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Durable precision fastener for secure component mounting. Made in the U.S.A.

€29.15 €36.63

-€1.32
Out of Stock

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes

Precision-machined drain plugs that simplify fork oil changes. Made in the USA.

€5.11 €6.43

-€40.91

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Includes cam, primary, oil hose cover and transmission side cover. Made in the U.S.A.

€159.03 €199.94

-€38.76

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Complete bolt kit for side covers; includes cam, primary, oil hose cover and transmission side cover.

€150.77 €189.53

-€5.23

GARDNER-WESTCOTT Transmission Top Cover w/Sensor Mount Bolt Kit — Chrome

Hardware kit for mounting and securing a sensor on the transmission top; includes all necessary fasteners. Made in the U.S.A.

€20.35 €25.58

Belt Sprocket Bolt Kit — Belt sprocket to hub mount, Socket-head, Chrome

-€7.28
Out of Stock

GARDNER-WESTCOTT Belt Sprocket Bolt Kit — Belt sprocket to hub mount,...

Complete fastening set for securing drive components to mating assemblies. Made in the U.S.A.

€28.33 €35.61

-€3.07
Out of Stock

COMETIC Shift Shaft Tube Gasket — 1.52 mm (0.060"), primary spacer

Durable multilayer gasket with Viton®-coated layers for reliable sealing in shift tube applications.

€8.69 €11.76

Extreme Sealing Technology Complete Gasket Kit — 1.02 mm (0.040"), For '70-'84 Shovelhead

-€31.65

COMETIC Extreme Sealing Technology Complete Gasket Kit — 1.02 mm...

Complete gasket kit with MLS head gaskets, Steel Viton-coated base gaskets, blue Viton stem seals and AFM exhaust gaskets. Includes motor, primary, derby and inspection cover gaskets. Made in USA.

€89.51 €121.16

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

Extreme Sealing Technology Complete Gasket Kit — 3.250" bore, 0.81 mm (0.032")

-€33.30

COMETIC Extreme Sealing Technology Complete Gasket Kit — 3.250" bore,...

Complete gasket kit with MLS head gaskets, steel Viton‑coated base gaskets, blue Viton valve stem seals, AFM race-style exhaust gaskets; includes motor, primary, derby and inspection cover gaskets. Made in the USA.

€113.08 €146.38

Extreme Sealing Technology Complete Gasket Kit — 3.625" bore, '70–'84 Shovelhead

-€53.89

COMETIC Extreme Sealing Technology Complete Gasket Kit — 3.625" bore,...

Complete gasket kit with MLS head gaskets, Viton-coated base gaskets, AFM exhaust gaskets and valve stem seals; made in the USA.

€152.44 €206.33

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€5.69

COMETIC Primary Gasket Kit — Primary cover, 1.52 mm (0.060")

Complete primary gasket kit includes gaskets, seals and O-rings for inner and outer primary. High heat resistance, strong shape recovery, no sealer required. Made in USA.

€19.27 €24.96

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€1.14
Out of Stock

COMETIC Rocker Cover Gasket — 0.79 mm thickness, pair

High-quality rocker cover gasket for long-term reliability and fuel resistance. Made in the USA.

€3.19 €4.33

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine