Engine (3)

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Shouldered Cast Iron Valve Guide — Oversize (+0.003"), 2.100" length

-€2.41

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.003"), 2.100"...

Precision-machined cast iron valve guide compatible with no-lead fuel; seals sold separately.

€7.20 €9.61

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€2.41

KIBBLEWHITE Cast Iron Valve Guide — 0.3098" ID, 2.400" L, Oversize +0.003"

Precision-machined cast iron valve guide compatible with no-lead fuel. Built for long service life and reliability; made in the USA.

€7.20 €9.61

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.855" length

Precision-machined shouldered valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the USA.

€7.80 €10.54

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Shouldered Cast Iron Valve Guide — Oversize (+0.001"), 0.3745" ID, 1.910" L

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.001"), 0.3745"...

Precision-machined shouldered valve guide compatible with unleaded fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.80 €10.54

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745" ID

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3745" ID

Precision-machined cast iron valve guide compatible with lead-free fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.38 €9.98

Shouldered Cast Iron Valve Guide — 0.3745 in ID, 1.855 in L, Oversize +0.002 in

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745 in ID, 1.855 in L,...

Precision-machined valve guide compatible with unleaded fuel; accepts special seals; made in USA.

€7.38 €9.98

Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID 0.3745", Length 1.855"

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.003"), ID...

Precision-machined for consistent fit and durability. Compatible with unleaded fuel and all valve-stem materials. Accepts special seals (sold separately). Made in the USA.

€7.80 €10.54

Shouldered Cast Iron Valve Guide — Oversize (+0.004 in), 0.3745 in ID, 1.910 in length

-€2.88

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.004 in),...

Precision-machined cast iron valve guide; compatible with no-lead fuel; accepts special valve guide seals (sold separately); made in the USA.

€8.13 €11.01

Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.910" length, special shouldered

-€2.68

KIBBLEWHITE Shouldered Cast Iron Valve Guide — 0.3745" ID, 1.910" length,...

Precision-machined cast iron valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.60 €10.28

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

Shouldered Cast Iron Valve Guide — Inside diameter 0.3745", Length 1.910", Oversize +0.001"

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Inside diameter 0.3745",...

Precision-machined cast iron valve guide; accepts any valve-stem material. Special seals sold separately. Made in USA.

€7.38 €9.98

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), Inside Diameter 0.3745", Length 1.910", Cast Iron

-€2.74

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), Inside...

Precision-machined cast iron valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the USA.

€7.80 €10.54

-€44.64

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

Shouldered Cast Iron Valve Guide — Standard, 0.3745 in ID, 1.910 in length

-€2.79

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Standard, 0.3745 in ID,...

Precision-machined shouldered valve guide; sold each. Compatible with no-lead fuel and special seals.

€7.89 €10.68

Shouldered Cast Iron Valve Guide — Standard, ID 0.3745 in, Length 1.855 in

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Standard, ID 0.3745 in,...

Precision-machined shouldered valve guide; accepts special seals (sold separately). Made in USA.

€7.38 €9.98

-€39.78

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

C630 Valve Guides — 2.40" length, Oversize (+0.003"), C630 Bronze

-€10.14

KIBBLEWHITE C630 Valve Guides — 2.40" length, Oversize (+0.003"), C630 Bronze

Precision-machined C63000 bronze valve guides with tapered nose for improved flow. Accept OEM-style top hat seals (sold separately). OEM style, made in the USA.

€28.69 €38.83

-€10.14

KIBBLEWHITE C630 Valve Guides — 2.40" length, Oversize (+0.004"), OEM-style

Precision C630 bronze valve guides with a tapered nose, compatible with no-lead fuel and chromed stems; accepts OEM top-hat seals. OEM style.

€28.69 €38.83

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€10.85

KIBBLEWHITE Valve Keeper Keys — 15°, stem diameter 0.375"

Precision machined valve keeper keys; split, tumbled and heat treated for lasting performance. Made in the USA.

€30.67 €41.52

-€52.02

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€9.83

KIBBLEWHITE Keeper Set — 15°, 4 pairs

Precision replacement keepers for KPMI valve spring kits. Split, tumbled and heat treated for durability. Made in the USA.

€27.82 €37.65

-€52.02

ANDREWS EV7 Cam — 266° duration, 0.560" lift

Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.

€202.28 €254.30

-€8.44
Out of Stock

KIBBLEWHITE Valve Keeper Keys — 15° size, 0.310" stem diameter

Precision valve keeper keys, single-point machined and heat treated for consistent installation.

€30.67 €39.11

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine