Engine (3)

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€87.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 6-row, low mount, Black

Advanced oil cooling with turbulators and mini-louvered fins for maximum heat transfer and minimal pressure loss. Includes installation components. Made in the USA.

€341.95 €429.89

Vertical Frame-Mount Oil Cooler Kit — 10-row, Black

-€104.92

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 10-row, Black

Specially designed turbulators increase heat dissipation; mini-louvered fins and multipass flow optimize cooling. Includes installation components. Made in USA.

€408.05 €512.97

Oil Cooler Kit — 10-row, low-mount, Black

-€98.94

JAGG OIL COOLERS Oil Cooler Kit — 10-row, low-mount, Black

Oil cooler kit that improves cooling with mini-louvered fins, multipass flow, and included installation hardware. Made in the USA.

€384.80 €483.74

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, low-mount, black

-€126.39

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, low-mount, black

High-performance low-mount oil cooler with automatic fan control for reliable cooling in stop-and-go and highway riding.

€491.52 €617.91

Oil Cooler Kit — 10-row, low mount horizontal, Black

-€98.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, low mount horizontal, Black

Multipass flow and mini-louvered fins for maximum cooling.
Specially designed turbulators enhance heat dissipation.
Includes installation components; made in the USA.

€384.80 €483.74

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, black

-€126.39

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, black

Fan-assisted oil cooler kit optimized for low-speed and highway performance. Includes cooler, hoses, fan switch wiring, offset oil filter adaptor, and mounting hardware. Fan activates at ~205°F and delivers 150 cfm.

€491.52 €617.91

-€96.53
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, Low mount, Black

Specially designed turbulators and mini-louvered fins deliver efficient oil cooling and longer engine life; includes installation components.

€375.41 €471.94

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, horizontal, Black

-€126.39
Out of Stock

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, horizontal, Black

Fan-assisted low-mount oil cooler kit for stop-and-go and highway use. Automatic fan at ~205°F, 150 cfm; includes hoses and mounting hardware.

€491.52 €617.91

Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row, Black, Silver, Orange

-€123.31
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Fan Assisted Oil Cooler Kit — 10-row,...

High-efficiency vertical, frame-mounted oil cooler kit with automatic fan; ideal for low-speed and highway use. Includes fan, hose, hardware, thermal switch wiring harness, and filter adapter. Made in the USA.

€479.53 €602.84

-€136.05

ALLOY ART Comp Cam Cover — Machined

Finned cam cover with a low-profile design for improved header clearance and enhanced crankcase breathing. CNC machined for durability.

€384.47 €520.52

Comp Cam Cover — Black, 6061-T6 billet aluminum, finned

-€148.64

ALLOY ART Comp Cam Cover — Black, 6061-T6 billet aluminum, finned

Low-profile cam cover with large breather fitting, CNC-machined billet aluminum construction, finned for extra cooling; made in the USA.

€420.08 €568.72

$Compression Release Adapter — 14 mm (3/8\"), straight$

-€6.88

ALLOY ART Compression Release Adapter — 14 mm (3/8\"), straight

Designed for twin plug heads. Accepts .650" / 10 mm x 1.0 valves. Sold each. Made in the U.S.A.

€19.47 €26.35

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover, JGI-11293-K

-€11.86

JAMES GASKET Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover,...

Complete gasket and o-ring kit to seal four pushrod covers; includes gaskets, o-rings, chrome-plated allen bolts and washers. Made in USA.

€33.45 €45.31

Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever & Starter Housing

-€6.50

JAMES GASKET Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever &...

Complete gasket and seal kit for the deflector plate that prevents leaks and restores reliable sealing. Made in the USA.

€22.07 €28.57

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine