Engine (3)

-€29.41

JIMS Right-Side Crankcase Bushing — Standard size

Precision right-side engine-housing insert with 360° oiling. Made in the U.S.A. Provides reliable support and reduced wear.

€114.35 €143.76

-€31.75

JIMS Big Axle™ Powerglide™ Tappets — 0.8425" diameter, hydraulic

Precision-engineered rollers and enlarged axle eliminate play for improved cam tracking. Made in the U.S.A.

€123.44 €155.19

-€37.49

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard, Hydraulic

Precision-machined Powerglide™ hydraulic tappets, hand-fit for exact cam timing and extended roller life.

€145.77 €183.26

-€30.63

JIMS Powerglide™ Tappets — Standard, 0.7310" diameter

Precision Powerglide™ tappets for cast iron or aluminum tappet blocks. Recommend fitting with .0007"–.0012" clearance. Hand-fit hydraulic unit to .0002" for exact cam timing.

€119.11 €149.74

-€47.62

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360", Hydraulic

Precision billet-machined tappets, hand-fitted for exact cam timing and improved roller life.

€185.22 €232.84

-€36.91

JIMS Tappets — Standard, Solid

Precision roller assembly with larger outer rollers, smaller pin bearings for higher rpm, and an enlarged axle that eliminates internal movement. Made in the U.S.A.

€143.55 €180.46

-€34.50

JIMS Big Axle™ Powerglide™ Tappets — Diameter 0.9035"

High-precision hydraulic tappets with micro-finish bore and oversized axle for improved cam tracking.

€134.17 €168.67

-€35.43

JIMS Hydrosolid Tappets — 0.8425" diameter

Performs like hydraulic to 5,500 rpm then becomes solid, adding ~3–6 hp and preventing hydraulic pump-up. Made in the U.S.A.; requires adjustable pushrods.

€137.81 €173.24

-€48.84

JIMS Hydrosolid Tappets — Diameter 0.9035"

Performs like a hydraulic tappet to 5500 rpm, then converts to a solid tappet for an additional 3 to 6 usable hp; requires adjustable pushrods. Made in the U.S.A.

€138.01 €186.85

-€36.45

JIMS Powerglide™ Tappets — Oversize (+0.002"), Diameter 0.7330"

Hand-fit hydraulic tappets offering precise roller alignment and exact cam timing; recommend .0007"–.0012" block clearance.

€141.75 €178.20

Powerglide™ Tappets — 0.7310" diameter, Standard

-€25.38

JIMS Powerglide™ Tappets — 0.7310" diameter, Standard

Precision-machined hydraulic tappets for cast iron or aluminum blocks. Fitted to exact clearances for long roller life and accurate cam timing.

€98.68 €124.06

Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002", Standard Hydraulic

-€26.20

JIMS Powerglide™ Tappets — 0.7330" diameter, Oversize +0.002",...

Precision billet-steel hydraulic tappets for Powerglide applications. Hand-fit for exact cam timing and extended roller life.

€101.89 €128.09

-€26.20

JIMS Powerglide™ Tappets — 0.7360" diameter, Oversize +0.005"

Fits cast iron and aluminum valve-lifter blocks
Billet bearing metal construction
Hand fit hydraulic unit, .0002" running fit
Recommended block clearance .0007"–.0012"

€101.89 €128.09

-€31.17

JIMS Manual Compression Release Valves — Primary starter, Pair, Silver

Reduce starting compression with easy-install manual release valves. Drill and tap each cylinder head 10 mm x 1.0 mm. Fits all Big Twin models.

€121.23 €152.40

-€9.44

JIMS Oil Pump Component — 26346-69/70

Replacement oil pump component for Big Twin models.

€36.69 €46.13

Oil Pump Component — Idler gear, 26317-68A

-€12.82

JIMS Oil Pump Component — Idler gear, 26317-68A

Replacement component for Big Twin models; precision-machined to restore lubrication performance and reduce noise.

€49.89 €62.71

-€14.02

JIMS Oil Pump Component — JIMS idler gear

Replacement component for Big Twin lubrication systems. Precision‑machined for durability and proper fit.

€54.52 €68.54

-€7.44

JIMS Gear-Side Pinion Shaft Nut — 5/8-24

High-strength pinion shaft nut designed for secure gear-side installation and long service life.

€28.92 €36.36

Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

-€4.94

JIMS Gear-Side Pinion Shaft Nut — 5/8-24 left-hand threads

Secures the pinion shaft on the gear side; install to specified torque and check endplay after tightening.

€19.22 €24.16

-€6.48

JIMS Valve Lock Keys — 8-pack

Precision-made valve lock keys with a 10° lock angle. Heat-treated and made in the U.S.A. Designed for reliable valve keeper service.

€25.19 €31.67

High-Performance Piston Kit — 3.5155" piston, 4.25" stroke, 1340 cc

-€86.89

WISECO High-Performance Piston Kit — 3.5155" piston, 4.25" stroke,...

Complete top-end piston kit with forged pistons, rings, retainer clips and chrome piston pins, plus a full X‑Ring package.

€245.85 €332.74

High-Performance Piston Kit — Bore 3.508", Oversize +0.010", Stroke 3-13/16", Compression 9.5:1, 1200 cc

-€92.69

WISECO High-Performance Piston Kit — Bore 3.508", Oversize +0.010",...

Complete top-end kit with forged aluminum pistons, X-Ring package, rings, retainer clips and chrome piston pins for reliable performance.

€262.24 €354.93

High-Performance Piston Kit — Bore 3.508", Stroke 4-1/4", 1340 cc, Aluminum

-€92.69

WISECO High-Performance Piston Kit — Bore 3.508", Stroke 4-1/4", 1340...

Complete top-end piston kit with X-Ring package and all necessary installation hardware.

€262.24 €354.93

-€0.64

WISECO High-Performance Replacement Circlips — Piston

High-strength replacement circlips for piston applications. Includes rings for one piston. Forged from a high-silicone aluminum alloy for durability and dimensional consistency.

€1.83 €2.47

High-Performance Piston Kit — 3.195" piston diameter, 10.0:1 compression ratio, Aluminum

-€83.64

WISECO High-Performance Piston Kit — 3.195" piston diameter, 10.0:1...

Forged high-silicon aluminum piston kit with pistons, rings, retainer clips and chrome pins. Includes X-Ring set; pistons made in the USA.

€216.00 €299.64

High-Performance Piston Kit — 3.4955 in piston diameter, 10.5:1 compression, 1200 cc displacement

-€93.31

WISECO High-Performance Piston Kit — 3.4955 in piston diameter,...

Complete top-end piston rebuild kit with X-Ring package and hardware. Made in the USA.

€264.01 €357.32

Piston Kit with Gaskets — Piston diameter 3.934", Displacement 1746 cc

-€152.67

WISECO Piston Kit with Gaskets — Piston diameter 3.934", Displacement...

Forged high-silicon aluminum pistons with Armor Plating; kit includes pistons, pins, retainer clips, top-end gasket kit and VM-Rings. Made in USA.

€431.93 €584.60

-€115.92
Out of Stock

WISECO Piston Kit — 3.937", 4-3/8", 11:1, 1746 cc

ArmorX™-coated pistons with ArmorFit™ skirt coating for smooth, quiet operation. Includes pistons, rings, pins and circlips. Made in the U.S.A.

€327.99 €443.91

Piston Kit — 4.077" piston, 114 CI displacement, 11.0:1 compression

-€115.92

WISECO Piston Kit — 4.077" piston, 114 CI displacement, 11.0:1...

ArmorX™ coated piston kit with ArmorFit™ skirts, dome design for efficient burn, dedicated rings, and complete hardware included.

€327.99 €443.91

Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke, 11:1 compression

-€114.36

WISECO Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke,...

High-performance Wiseco piston kit with ArmorX™ coating and ArmorFit™ skirt. Includes pistons, rings, piston pins and circlips. Fits OEM and Screamin’ Eagle heads. Made in the U.S.A.

€323.56 €437.92

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company