Engine (3)

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

-€6.50

COLONY Transmission Top Cover Screw Kit — Chrome

OEM-duplicate screw kit for mounting the transmission top cover; made in the USA.

€25.32 €31.82

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

-€5.63

COLONY Clutch Adjusting Hole Cap — Silver

Replacement clutch adjuster hole cap. Made in the U.S.A.

€12.69 €18.32

-€5.07

COLONY Primary Cover Filler Caps — Silver

Precision-machined filler caps that complete the primary cover with a clean, finished look. Made in the U.S.A.

€19.70 €24.77

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€3.49

COLONY Rear Master Cylinder Mounting Kit — Silver, zinc finish

Includes zinc-plated stud, bolt and washers. Kit for rear master cylinder mounting.

€13.57 €17.06

-€16.98

COLONY Head Bolt Set — 12-point, SAE, silver, zinc-plated

Replacement head bolts. Made in the USA.

€66.06 €83.04

-€16.98

COLONY Head Bolt Set — 12-point, silver zinc-plated, SAE

Replacement head bolts, made in the USA for reliable fit and durability.

€66.06 €83.04

-€6.47

COLONY Bolt and Washer Kit — fit for sprocket, Silver

Bolt and Washer Kit for specific Harley-Davidson® motorcycle models. Made in U.S.A.

€25.15 €31.62

-€6.60

COLONY Bolt and Washer Kit — Sprocket, Silver

Bolt and washer kit for select Harley-Davidson® motorcycles. Made in U.S.A.

€25.68 €32.28

Primary Cover Bolt Kit — Chrome, Polished

-€9.01

COLONY Primary Cover Bolt Kit — Chrome, Polished

Replacement hardware kit. Made in the USA.

€35.01 €44.02

-€3.53

COLONY Jiffy Stand Mounting Kit — Zinc finish

Mounting kit includes pin, clip, washers, and bushings for jiffy stand installation.

€10.00 €13.53

-€4.30

COLONY Jiffy Stand Mounting Kit — Zinc

Replacement hardware for jiffy stand: pin, clip, washers and bushings included.

€16.68 €20.98

-€2.15

COLONY Jiffy Stand Clevis Pin Pretzel Clips — Zinc, 5-pack

Reproduction of the OEM 554A clip used on many 89 and up H-D kickstands.

€6.07 €8.22

-€6.14

COLONY Rocker Cover Bolt Kit — Chrome, Silver, Polished

Replacement hardware kit for rocker cover; made in the USA.

€17.38 €23.52

-€1.96

COLONY Front Brake Rotor Torx Bolt Kit — 5/16-18 x 7/8 in, zinc

Torx bolt set for front brake rotor with Torx head design for secure fastening. Size 5/16-18 x 7/8 in.

€7.60 €9.56

-€2.75

COLONY Rear Fender Support Mounting Screws/Nuts — 3/8"-24 x 15/16", zinc

Reproduction set of rear fender support mounting screws and locknuts, size 3/8"-24 x 15/16", made in the USA.

€7.81 €10.56

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine