Engine (3)

Tracker Series™ Piston Kit — Bore 3.885", Oversize +0.010", Stroke 4.000", 1554 cc

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.885", Oversize +0.010",...

Forged, precision-fit piston kit with ArmorGlide® coating; includes two pistons, rings, pins and circlips. Made in the USA.

€193.19 €261.47

-€84.68

S&S CYCLE 585C Chain Drive Camshaft Kit — 585 Series grind

Mid-range focused cam kit for 88"–107" big-twin engines. Strongest 3500–6000 rpm (smaller engines) and 2500–5000 rpm (larger engines). Made in the USA. Installer must check coil bind and clearances.

€329.33 €414.01

Tracker Series™ Piston Kit — Bore 3.875", Displacement 1691 cc, Compression 10.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.875", Displacement 1691...

Forged, precision-fit piston kit with ArmorGlide® skirt coating and force-fed pin oiling. Value-pack includes two pistons, rings, pins, and circlips.

€193.19 €261.47

Tracker Series™ Piston Kit — Bore 3.885 in, Stroke 4.375 in, Oversize +0.010 in

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.885 in, Stroke 4.375 in,...

Durable forged piston kit with low-friction skirt coating; includes two pistons, rings, pins and circlips, made in the USA.

€193.19 €261.47

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020", Stroke 4.375", Compression 10.5:1

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.895", Oversize +0.020",...

Forged aluminum piston kit with ArmorGlide® skirt coating; includes two pistons, rings, piston pins and circlips.

€193.19 €261.47

Tracker Series™ Piston Kit — 3.498" bore, 3.812" stroke, 1200 cc, 9.5:1

-€57.15

WISECO Tracker Series™ Piston Kit — 3.498" bore, 3.812" stroke, 1200...

Durable forged pistons with ArmorGlide® skirt coating, precision-fit rings and force-fed pin oiling. Value-pack kit with pins and circlips. Made in the USA.

€161.68 €218.83

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

Tracker Series™ Piston Kit — Bore 3.508", Oversize +0.010", Stroke 3.812", CR 9.5:1

-€57.15

WISECO Tracker Series™ Piston Kit — Bore 3.508", Oversize +0.010",...

High-performance forged piston kit with ArmorGlide® skirt coating, precision rings, and force-fed pin oiling. Includes pistons, rings, pins, and circlips.

€161.69 €218.84

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

Tracker Series™ Piston Kit — 3.518" bore, 3-13/16" stroke, 1214 cc

-€57.15

WISECO Tracker Series™ Piston Kit — 3.518" bore, 3-13/16" stroke,...

Two-piston kit engineered for strong sealing, improved lubrication and reduced friction. Includes pistons, rings, pins and circlips. Made in the USA.

€161.68 €218.83

-€62.50

WISECO Tracker Series™ Piston Kit — 3.508" bore, 4.250" stroke, 1,345 cc

Forged pistons with generous valve pockets for big valves and cams.

Includes rings, piston pins and circlips for two pistons.

Force-fed pin oiling and a pressure-seal groove enhance sealing and durability.

€176.82 €239.32

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

Piston Kit — 4.016" bore, 4.5" stroke, 11.0:1 compression, 114 cu in

-€104.06

WISECO Piston Kit — 4.016" bore, 4.5" stroke, 11.0:1 compression, 114...

ArmorX™-coated pistons with ArmorFit™ skirts for smooth, quiet operation. Includes pistons, rings, piston pins and circlips. Fits OEM and Screamin’ Eagle heads. Made in the U.S.A.

€214.73 €318.79

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 €110.00

-€104.06

WISECO Piston Kit — 4.077" piston, 11.3:1 compression, 118 ci

High-performance piston kit with ArmorFit™ and ArmorX™ coatings for reduced wear, improved sealing and reliable fitment.

€87.22 €191.28

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

-€111.87

S&S CYCLE Piston Kit for S&S Motors — 1200 cc, 12.2:1, 4-5/8"

Complete piston kit with forged pistons, rings, wrist pins, and clips. Deck height 1.1875". For use with super stock heads on compatible models.

€352.99 €464.86

-€109.47

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series, chain

Reduces crank compression for easier starting, then returns to full compression for normal performance. Bolt-in for 88"–106" Touring bikes with slip-on mufflers. Improves low-end and midrange torque. Not for OEM compression releases or compression ratios ≥10.0:1.

€425.73 €535.20

$Piston Kit for S&S Motors — 1200 cc, stroke 4-5/8\", bore +0.010\"$

-€114.24

S&S CYCLE Piston Kit for S&S Motors — 1200 cc, stroke 4-5/8\", bore...

Complete piston kit includes forged pistons, rings, wrist pins, and clips. 1.1875" deck height. For 1200 only with super stock heads.

€360.49 €474.73

-€111.87

S&S CYCLE Piston Kit for S&S Motors — 3.500 in bore, 89 cu in

Complete piston kit with pistons, rings, wrist pins and clips. Made in the U.S.A.

€270.95 €382.82

-€109.47

S&S CYCLE 583 Easy Start Camshaft Kit — 583 Series grind, S&S Cycle

Easy-start camshaft kit for Big Twin engines; optimized for Softail and Dyna, bolt-in and made in the USA.

€425.73 €535.20

-€87.95

S&S CYCLE PISTN SET 3.5" S&S HDS.005 — S&S CYCLE, 92-20465

3.5-inch piston set for engine rebuilds; precision-machined for reliable sealing and durability.

€147.13 €235.08

$Piston Kit for S&S Motors — Bore 3.500\" , Oversize +0.010\" , 89 cu in$

-€109.48

S&S CYCLE Piston Kit for S&S Motors — Bore 3.500\" , Oversize +0.010\" ,...

Complete piston kit with pistons, rings, wrist pins and clips. Made in the U.S.A.

€345.47 €454.95

583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°, Intake 204°

-€216.89

S&S CYCLE 583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°,...

Easy-start camshaft kit for Big Twin; optimized for Softail and Dyna, bolt-in, strong low-end torque; includes hardware; made in USA.

€843.44 €1,060.33

Piston Kit for S&S Motors — 3.500" bore, +0.020" oversize, 4-5/8" stroke, 89 cu in

-€109.48

S&S CYCLE Piston Kit for S&S Motors — 3.500" bore, +0.020" oversize,...

Complete piston kit with forged pistons, rings, wrist pins and clips. Made in the U.S.A.

€345.47 €454.95

-€216.89

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear

Reduces cranking compression for easier starts; bolt-in kit for 88–124 CID engines; increases power from 3,000 rpm and holds to redline; includes complete hardware; not for OEM compression release models; Made in USA.

€843.44 €1,060.33

-€109.48

S&S CYCLE Forged 74" Piston Kit — 3-31/32" stroke, 3.4375" bore

Complete forged piston kit for 74" big twin motors. Includes pistons, rings, wristpins, and clips. Made in the U.S.A.

€318.71 €428.19

Piston Kit 80" Stock Big Twin — 80", 3.510" bore, 4-1/4" stroke, 7.440" rod length

-€91.87

S&S CYCLE Piston Kit 80" Stock Big Twin — 80", 3.510" bore, 4-1/4"...

Piston kit for 80" Stock Big Twin motors. Includes pistons, rings, wrist pins, and clips. Requires 7.440" rod length. Made in the U.S.A.

€357.27 €449.14

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine