Engine (27)

-€264.34

FEULING OIL PUMP CORP. Race Series® Oil System Kit — 7072ST, Aluminum, Red, Natural

FEULING® OE+ billet oil pumps provide increased oil pressure and scavenge volumes as a stock replacement; made in the USA and compatible with specified Feuling cam grinds using short-travel pushrods.

€1,028.05 €1,292.39

-€266.28

FEULING OIL PUMP CORP. Race Series® Oil System Kit — Chain Drive, Aluminum, Red, Natural

OE+ stock replacement billet oil pumps increase oil pressure and scavenge return volumes; assembles without O-rings for reliable stock replacement performance.

€1,035.57 €1,301.85

Race Series® Oil System Pack — 7075ST, Aluminum

-€264.34

FEULING OIL PUMP CORP. Race Series® Oil System Pack — 7075ST, Aluminum

Complete kit to finish your engine oiling system—improves oil pressure, reduces temps and delivers measured power gains.

€1,028.05 €1,292.39

-€264.34

FEULING OIL PUMP CORP. Race Series® Oil System Pack — Kit, Chain drive, Aluminum, Red

Complete kit that increases oil pressure and flow, lowers oil and engine temperatures, eliminates wet sumping and blowby, and delivers measurable rear-wheel power gains.

€1,028.05 €1,292.39

-€307.02

FEULING OIL PUMP CORP. Race Series® Oil System Packs For M8 — Red kit

Complete Race Series® oil system packs for M8 that increase oil flow, scavenge volume and lower engine and oil temperatures.

€1,193.98 €1,501.00

-€307.02

FEULING OIL PUMP CORP. Race Series® Oil System Packs For M8 — Red

Complete Race Series® oiling kit for M-Eight engines
Increases oil flow, scavenge volume and oil pressure
Up to 42% more scavenge volume; 68% more oil to crank and rod bearings
Lowers engine and oil temperatures
Includes pump, high-flow camplate, hydraulic lifters and installation kit
Made in the USA

€1,193.98 €1,501.00

-€326.92

FEULING OIL PUMP CORP. HP+® Oiling System/Camchest — Chain, Kit

Complete camchest and oiling system refresh for late-model Twin Cam engines. Installs new lifters, tensioner housings, sprockets, chains, bearings, gaskets, and hardware. Fits '07–'17 chain-drive camshafts.

€1,271.39 €1,598.31

Race Series® Camchest Kit — for '07–'17 chain drive Twin Cam engines

-€512.01

FEULING OIL PUMP CORP. Race Series® Camchest Kit — for '07–'17 chain drive Twin Cam...

Complete camchest refresh kit for '07–'17 chain drive Twin Cam engines; includes high-volume oil pump, high-flow cam plate, full-travel lifters, chains, bearings, gaskets and hardware.

€1,447.02 €1,959.03

-€44.53

KIBBLEWHITE Cylinder Stud Kit — 8-pack, Black

Precision-ground studs with radius-ground thread ends and hydraulically rolled threads for maximum strength and reduced notch sensitivity.

€125.97 €170.50

-€132.29

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — Black

Complete stud and head bolt kit for V-Twin engines; includes studs, head bolts, assembly lubricant and thread sealant.

€514.45 €646.74

-€33.91

FEULING OIL PUMP CORP. Rocker Arm Shaft Stud & Nut Kit — Black

Stud and nut kit that reinforces rocker arm shaft standoffs to help prevent cylinder head cracking.

€131.90 €165.81

-€56.16

FEULING OIL PUMP CORP. Gorilla Rocker Shaft and Stud Kit — Silver

High-strength rocker shaft and stud kit for M‑Eight engines; over double the factory strength, gas nitrated, precision ground, made in the USA.

€218.84 €275.00

-€81.22

FEULING OIL PUMP CORP. Gorilla Rocker Shaft and Stud Kit — Silver, Steel

High-strength rocker shaft and stud kit for M-Eight engines; gas nitrated, precision ground 4140HT steel, made in the USA.

€315.88 €397.10

-€9.21

JIMS Rocker Arm Shaft — JIMS, 17611-83

Precision-machined replacement to restore valve-train alignment. Made in the U.S.A.

€35.82 €45.03

-€28.51
Out of Stock

JIMS Crank Pin — 23960-54, Silver

Quality replacement that meets or exceeds OEM specifications. Made in the U.S.A.

€110.85 €139.36

-€24.78
Out of Stock

JIMS Rod Race Set — Copper

Precision rod race set machined from 52100 Timken® bearing stock. Made in the U.S.A.

€96.39 €121.17

-€167.20
Out of Stock

JIMS Aluminum Lifter Blocks — Pair, Aluminum finish

Kits include front and rear lifter blocks plus gaskets. Mounting screws sold separately; 53-65 models use 1/4"-24 screws. Made in the U.S.A.

€650.23 €817.43

-€37.12
Out of Stock

JIMS Motor Sprocket Shaft — JIMS, 24001-56

Precision motor sprocket shaft designed for reliable power transfer and long service life. Made in the U.S.A.

€144.38 €181.50

-€37.40
Out of Stock

JIMS Right-Side Crankcase Bushing — Standard Size, 24599-40

Precision right-side crankcase bushing with 360° oiling and U.S.-made construction.

€145.42 €182.82

-€39.47

JIMS Pinion Gear Shaft — JIMS, 24006-54A

Precision pinion gear shaft, made in the U.S.A., designed for reliable drivetrain performance.

€153.55 €193.02

-€45.01

JIMS Pinion Gear Shaft — JIMS, 24007-39

Precision replacement shaft made in the U.S.A.; heat-treated and precision ground for long life. Inspect bearings and seals during installation.

€175.03 €220.04

-€40.26

JIMS Motor Sprocket Shaft — 23909-80, Steel

All ground diameters concentric to within .0003" for easier flywheel trueing and rebuilding. Manufactured from domestic materials. Made in the USA.

€156.57 €196.83

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.005"), 0.7360"

Precision-machined Powerglide™ tappets for reliable roller life and exact cam timing; hand-fit hydraulic units and state-of-the-art pushrod seats.

€133.85 €168.27

-€33.84

JIMS Tappets — Oversize (+0.005 in), Solid

Precision-engineered tappets with larger outer roller wall, reduced pin bearing diameter and a reinforced axle for improved cam-lobe tracking and less vibration. Made in the U.S.A.

€131.58 €165.42

-€3.09

JIMS Pinion Gear Spacer — 24703-54B

Precision spacing component that ensures proper drive alignment. Made in the U.S.A.

€12.02 €15.11

-€34.42

JIMS Powerglide™ Tappets — Oversize (+0.002"), 0.7330" dia

Precision Powerglide tappets for reliable lifter performance; recommended clearance .0007"–.0012".

€133.85 €168.27

-€79.38
Out of Stock

JIMS Chrome Billet Lifter Covers — Pair

Precision CNC-machined lifter covers. Gaskets and screws included. Made in the United States.

€308.69 €388.07

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine