Engine (26)

-€6.26

EASTERN MOTORCYCLE PARTS Main Shaft Washers — 5 pack, silver

Replacement main shaft washers for maintenance and repairs.

€17.70 €23.96

-€6.26

EASTERN MOTORCYCLE PARTS Main Shaft Washers — Size +.015"

Replacement main shaft washers for reliable spacing and smooth shifting.

€17.70 €23.96

Thrust Washers — 4-speed, countershaft, 5-pack

-€6.26

EASTERN MOTORCYCLE PARTS Thrust Washers — 4-speed, countershaft, 5-pack

Precision thrust washers reduce axial play and extend transmission life.

€17.70 €23.96

Countershaft Bearing Retainer Washers — 5 pack, inner, silver

-€5.74

EASTERN MOTORCYCLE PARTS Countershaft Bearing Retainer Washers — 5 pack, inner, silver

Replacement bearing retainer washers for secure bearing retention.

€16.22 €21.96

Tappet Roller Kit — Chromoly Steel, 52100 Steel

-€10.11

JIMS Tappet Roller Kit — Chromoly Steel, 52100 Steel

Precision tappet roller kit for reliable valve-train performance and easy installation. Made in the U.S.A.

€39.28 €49.39

-€13.38
Out of Stock

JIMS Oil Pump Drive Shaft — JIMS 26346-36

Precision-ground oil pump drive shaft replacement, made in the U.S.A.

€52.03 €65.41

Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

-€17.22

JIMS Oil Pump Component — JIMS, Gear drive oil pump, 26315-68A

Replacement oil pump component for Big Twin models; restores gear-driven oil flow and pressure. Inspect seals and clearances during install.

€48.73 €65.95

-€38.38
Out of Stock

JIMS Right-Side Crankcase Bushing — Size +0.002"

Right-side crankcase bushing with 360° oiling and precision fit; made in the U.S.A., recommended for professional rebuilds.

€149.24 €187.62

-€190.60

JIMS Flow Pro 1 Billet Oil Pump Complete Assembly — Polished

Complete oil pump assembly with CNC-machined feed and return gears; includes all seals and mounting hardware. Verify motor case thread size before installation.

€741.22 €931.82

-€51.39
Out of Stock

JIMS Valve Spring Kit — 0.600" lift

Interference double-spring design with damper for harmonic control.
Includes locks, retainers and spring seats.
Built for severe service and high-compression engines.

€199.83 €251.22

-€7.55

ANDREWS Low-Profile Lower Spring Collars — Set of 4

Increases spring travel by .060" for improved suspension response. Precision-machined and made in the U.S.A.

€29.38 €36.93

-€55.83

S&S CYCLE Valve Spring Kit — 0.550" lift, 140 lb seat pressure

Allows additional rocker clearance for '48-'65 Panheads; includes late single bottom collars for S&S and stock late '81-'85 heads; works with stock-style bottom collars and thin-stem valves with thicker keepers.

€217.09 €272.92

-€11.00

ANDREWS High-Lift Upper Spring Collars — For 74" and 80" motors, 4 Pack

Accepts cams with up to .600" lift; fits 74" and 80" motors; hard-coated for durability.

€42.81 €53.81

Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984 74" and 80" motors

-€15.25

ANDREWS Medium-Lift Upper Spring Collar Set — 4 pack, fits 1966–1984...

Fits stock springs to add ~0.060" of travel on 1966–1984 74" and 80" motors; eases installation of B or #2 cams; made in the U.S.A.

€59.30 €74.55

-€10.45

ANDREWS Valve Spring Upper Collars — Low-profile lower spring collar,...

Lower-profile valve spring upper collars similar to stock 80-style parts; required for 80-style guides using "K" line stem seals. Compatible with 74" and 80" motors. Heat-treated for durability. Made in the U.S.A.

€40.61 €51.06

-€13.17

ANDREWS High-Lift Valve Spring Kit — cam lifts 0.550", 4-pack

Accommodates cam lifts of .550"+, installs without machining heads. Includes four inner and four outer springs. For use with titanium upper-spring collars; collars sold separately. Made in the U.S.A.

€51.19 €64.36

-€5.13

DRAG SPECIALTIES Front ISO-Mount™ Motor Mount — Black

Urethane motor mount designed to out-last and out-dampen the OEM part. Sold individually.

€14.49 €19.62

Xl Front Engine Mount Plates — Front, Chrome

-€14.73

DRAG SPECIALTIES Xl Front Engine Mount Plates — Front, Chrome

Durable XL plates for improved alignment and reliable attachment.

€41.61 €56.34

-€7.56

DRAG SPECIALTIES Front Motor Mount Plate — Front, Chrome

Precision-engineered engine mount plate for OEM-fit alignment and easy bolt-on installation.

€21.35 €28.91

-€7.76

DRAG SPECIALTIES Top Motor Mount — Chrome

Secure, precision motor support with direct bolt-on installation and included hardware.

€21.93 €29.69

-€8.27

DRAG SPECIALTIES Top Motor Mount — Chrome

Durable one-piece motor mount with polished finish. Bolts not included.

€23.39 €31.66

-€50.01

PINGEL Xl Rear Motor Mount — Rear

Heavy-duty, super-high-tensile alloy construction; reinforced in crack-prone areas; replaces two-bolt and four-bolt top case OEM mounts; fits over studs and starter shaft; made in the U.S.A.

€194.44 €244.45

-€1.48

DRAG SPECIALTIES Chrome Rocker Oil Line Tube Fitting — Chrome

Replacement oil line tube fitting for Drag Specialties Rocker Oil Lines. Direct replacement, easy installation.

€4.18 €5.66

-€11.01

DRAG SPECIALTIES Heavy-Duty Top Motor Mounts — Chrome

Heavy-duty components, 30% thicker than stock; includes choke/horn brackets and sockethead hardware for select part numbers.

€31.13 €42.14

-€15.56
Out of Stock

DRAG SPECIALTIES Oil Filter Mount — Chrome

Direct-fit oil filter mount with 3/4"-16 adapter and 11/16" threads; installs with OEM hardware.

€43.95 €59.51

Air Cleaner Support Bracket Kit — Chrome, Gray

-€8.34

DRAG SPECIALTIES Air Cleaner Support Bracket Kit — Chrome, Gray

Support bracket kit for mounting an aftermarket air cleaner to the cylinder heads. Includes gaskets and mounting hardware; breather kits/bolts sold separately.

€23.58 €31.92

-€4.10

DRAG SPECIALTIES Air Cleaner Brace — Chrome, fits Keihin and Bendix carburetors

Reduces carburetor vibration to prevent air leaks; includes hardware and template.

€11.59 €15.69

-€7.96

DRAG SPECIALTIES Oil Pump Cover — Chrome

Covers the side and top of the oil pump; installs using two existing mounting points; includes polished hardware.

€22.49 €30.45

Replacement Cylinder for Evolution Motors — 3.498 in bore, 4.25 in stroke, 1340 cc, Front, Aluminum

-€77.33

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.498 in bore,...

Ductile cast-iron sleeved replacement cylinder for Evolution Motors; finished slightly undersized for final honing to piston fit.

€218.55 €295.88

-€62.86

DRAG SPECIALTIES Cylinder — 1200 cc, 3.435" bore, rear

Cast-iron construction meets or exceeds OEM tolerances; resists higher pressure and heat than stock.

€177.65 €240.51

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine