Engine (2)

-€9.78

PROX Main Bearing (Individual) — PROX, Main crankshaft, 23.6206RSI

Individual main bearing made to OEM specifications for reliable performance and precise journal support.

€24.67 €34.45

-€3.29

PROX Main Bearing (Individual) — Main Crankshaft, PROX 23.6304C3

Manufactured to exact OEM specifications for maximum reliability and performance.

€8.30 €11.59

-€4.04

PROX Main Bearing (Individual) — Main crankshaft, Each

Precision main bearing made to exact OEM specifications for main crankshaft applications. Sold individually.

€10.17 €14.21

-€6.37

PROX Main Bearing (Individual) — Main crankshaft, PN 23.6306C3

High-precision main bearing manufactured to exact OEM specifications for reliable performance.

€16.03 €22.40

-€10.05

PROX Main Bearing (Individual) — Main crankshaft

Manufactured to OEM specifications for reliable performance. Sold individually.

€25.34 €35.39

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€5.44

PROX Main Bearing (Individual) — Main crankshaft

Manufactured at leading OEM factories (mainly Japan). Made to exact OEM specifications for reliable crankshaft support and long service life.

€13.72 €19.16

-€6.37

PROX Main Bearing (Individual) — Main crankshaft

Precision main bearing made to OEM specifications for main crankshaft fitment. Sold individually.

€16.03 €22.40

-€6.37

PROX Main Bearing (Individual) — PROX, Main Crankshaft

High-precision main bearing manufactured to exact OEM specifications for reliable performance.

€16.03 €22.40

-€16.24

PROX Main Bearing (Individual) — Main Crankshaft, 23.830046-1

Precision main support component built to OEM specifications for reliable rotating-shaft support.

€40.93 €57.17

Main Bearing (Individual) — PROX, main crankshaft, P/N 23.830046-20, Each

-€13.62

PROX Main Bearing (Individual) — PROX, main crankshaft, P/N...

Precision-made at leading OEM factories in Japan. Produced to exact OEM specifications for reliable performance and long service life.

€34.33 €47.95

-€12.46

PROX Main Bearing (Individual) — Main crankshaft

Precision main bearing made to OEM specifications for dependable crankshaft support.

€31.43 €43.89

-€16.54

PROX Main Bearing (Individual) — Main crankshaft, 23.NJ206

Individual main bearing made to exact OEM specifications for reliable performance.

€41.70 €58.24

-€16.45

PROX Main Bearing (Individual) — 23.NJ206ECP-3, Main Crankshaft

Precision main bearing made to OEM specifications for reliable performance.

€41.48 €57.93

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine