Engine (2)

-€44.64

DRAG SPECIALTIES Connecting Rod Assembly — 84589

Durable replacement connecting rod assembly that meets or exceeds OEM specs and ships fully fitted for easy installation.

€401.76 €446.40

-€31.56

DRAG SPECIALTIES Connecting Rod Assembly — 24281-74A-BXLB1Z

Durable, OEM-compliant replacement that ships fitted and ready to install; complete kit with crankpin, retainers, bearings and nuts.

€284.06 €315.62

-€5.48

DRAG SPECIALTIES Exhaust Gaskets — 10 Pack, Exhaust Port

High-quality exhaust gaskets that provide a reliable seal to prevent leaks and reduce noise.

€49.27 €54.75

Exhaust Gaskets — Exhaust interconnect, 10 pack

-€5.69

DRAG SPECIALTIES Exhaust Gaskets — Exhaust interconnect, 10 pack

High-quality exhaust gaskets that seal exhaust joints and resist heat.

€51.17 €56.86

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€10.15

DRAG SPECIALTIES Deluxe Engine Bolt Cover Kit — Chrome, Silver

Covers raw OEM bolt heads on Harley-Davidson model engines. Kit includes motor, transmission, primary, and select chassis bolt covers. Easy to install; fasten with silicone (sold separately).

€91.31 €101.46

-€5.85

DRAG SPECIALTIES Engine Bolt Cover Kit — Chrome, Silver

Easy-to-install kit with detailed instructions. Includes motor bolt covers only. Fasten with silicone (sold separately). Covers raw OEM bolt heads on Harley-Davidson® model engines.

€52.64 €58.49

-€7.03

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Black, natural finish, ABS

Covers that conceal OEM bolt heads for engine, transmission and primary. Standard kits include motor bolt covers; deluxe and individual options available. Easy installation with included instructions.

€63.29 €70.32

-€5.09

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Black

Conceals OEM bolt heads on engine, transmission and primary.
Available as standard or deluxe kits; individual covers sold separately.
Easy installation with included instructions.

€45.86 €50.95

-€6.19

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Chrome, Silver

Covers OEM bolt heads on engine, transmission and primary for a clean look; easy install with included instructions.

€55.66 €61.85

-€6.27

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Chrome

Deluxe and standard kits to cover raw OEM bolt heads on engine, transmission and primary. Individual covers also available.

€56.48 €62.75

-€5.52

DRAG SPECIALTIES Disc Brake Hub Mounting Kit — Rear, Black

Includes Grade 8 bolts with large-diameter button-head Torx® heads for increased load-bearing surface. Made in the U.S.A.

€49.63 €55.15

-€5.20

DRAG SPECIALTIES M-Eight Bolt Kit — Black, Chrome

Complete hardware set for M-Eight installations. Made in the USA. Precision fit and corrosion-resistant plating.

€46.84 €52.04

-€3.15

MEMPHIS SHADES HD Replacement Well Nuts — #10-32 threaded inserts, Black, 5 Pack

Replacement well nuts for windshield attachment. #10-32 threaded inserts. Made in the USA.

€12.26 €15.41

-€5.36

DRAG SPECIALTIES Head Bolt Covers — 4 pack, chrome

Polished head bolt covers with a mirror-like finish. Made in the USA.

€48.26 €53.62

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€10.99

DRAG SPECIALTIES Pushrod Tube Kit — Black

Includes upper and lower tubes, clips, cups, springs and washers; O-rings/corks sold separately. One kit completes an engine.

€98.89 €109.88

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

On sale!
-€26.50

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€103.07 €129.57

Replacement Cylinder for Evolution Motors — 3.500" bore, 1340 cc, Black

-€32.78

DRAG SPECIALTIES Replacement Cylinder for Evolution Motors — 3.500" bore, 1340...

Direct-fit replacement cylinders with ductile cast-iron sleeves in aluminum castings; finish-honed for precise piston fit.

€295.05 €327.83

Replacement Cylinders for XL Evolution-Style Motors — 1200 cc, 3.5" , Black

-€32.79

DRAG SPECIALTIES Replacement Cylinders for XL Evolution-Style Motors — 1200 cc,...

Ductile cast-iron sleeved cylinders pressed into aluminum castings. Sleeve ribs lock to the casting; finished slightly undersized for final honing. Ideal for stock replacement.

€295.13 €327.92

$Replacement Cylinder — 3.750\", 88/96 cu in$

-€29.23

DRAG SPECIALTIES Replacement Cylinder — 3.750\", 88/96 cu in

OEM black textured powder-coat with highlighted fins; excellent for stock replacement.

€263.09 €292.32

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine