Engine (2)

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€6.50

COLONY Transmission Top Cover Screw Kit — Chrome

OEM-duplicate screw kit for mounting the transmission top cover; made in the USA.

€25.32 €31.82

-€5.63

COLONY Clutch Adjusting Hole Cap — Silver

Replacement clutch adjuster hole cap. Made in the U.S.A.

€12.69 €18.32

-€5.07

COLONY Primary Cover Filler Caps — Silver

Clean, reliable closure for primary cover access; precision fit and easy installation. Made in the U.S.A.

€19.70 €24.77

-€3.49

COLONY Rear Master Cylinder Mounting Kit — Silver, zinc finish

Includes zinc-plated stud, bolt and washers. Kit for rear master cylinder mounting.

€13.57 €17.06

-€16.98

COLONY Head Bolt Set — 12-point, SAE, silver, zinc-plated

Replacement head bolts. Made in the USA.

€66.06 €83.04

-€16.98

COLONY Head Bolt Set — 12-point, silver zinc-plated, SAE

Replacement head bolts, made in the USA for reliable fit and durability.

€66.06 €83.04

-€6.47

COLONY Bolt and Washer Kit — fit for sprocket, Silver

Bolt and Washer Kit for specific Harley-Davidson® motorcycle models. Made in U.S.A.

€25.15 €31.62

-€6.60

COLONY Bolt and Washer Kit — Sprocket, Silver

Bolt and washer kit for select Harley-Davidson® motorcycles. Made in U.S.A.

€25.68 €32.28

-€3.53

COLONY Jiffy Stand Mounting Kit — Zinc finish

Mounting kit includes pin, clip, washers, and bushings for jiffy stand installation.

€10.00 €13.53

-€4.30

COLONY Jiffy Stand Mounting Kit — Zinc

Replacement hardware for jiffy stand: pin, clip, washers and bushings included.

€16.68 €20.98

-€2.15

COLONY Jiffy Stand Clevis Pin Pretzel Clips — Zinc, 5-pack

Reproduction of the OEM 554A clip used on many 89 and up H-D kickstands.

€6.07 €8.22

-€6.14

COLONY Rocker Cover Bolt Kit — Chrome, Silver, Polished

Replacement hardware kit for rocker cover; made in the USA.

€17.38 €23.52

-€1.96

COLONY Front Brake Rotor Torx Bolt Kit — 5/16"-18 x 7/8", Zinc

Torx-head bolts for front brake rotors. Precision fit, 5/16"-18 x 7/8" length.

€7.60 €9.56

-€2.75

COLONY Rear Fender Support Mounting Screws/Nuts — 3/8"-24 x 15/16", zinc

Reproduction set of rear fender support mounting screws and locknuts, size 3/8"-24 x 15/16", made in the USA.

€7.81 €10.56

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), Brake rotor, Chrome

-€4.34

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete hardware kit for mounting rotors, sprockets and belts; fits most H‑D brakes and drives; made in the U.S.A.

€16.90 €21.24

Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"), Chrome, Button-Head Torx

-€3.11

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"),...

Complete mounting kit for brake rotors, sprockets and belts; fits most H-D brakes, chain and belt drives. Made in the U.S.A.

€12.10 €15.21

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), hub-mounted rotors, chrome

-€3.37

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete kit for rotor, sprocket and belt mounting; fits most H-D brakes and chain or belt drives. Includes all necessary hardware; made in the United States.

€13.13 €16.50

Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm (1-3/4") , for cast front and rear wheels

-€4.08

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm...

Complete mounting hardware kits for rotors, sprockets and belts; fits most H-D brakes, chain and belt drives.

€11.52 €15.60

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2 in), for cast wheels, chrome

-€6.02

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete kit with all hardware needed to mount rotors, sprockets and belt pulleys.

€23.36 €29.38

Rotor, Sprocket and Belt Mounting Hardware Kit — 31.8 mm (1-1/4"), chrome

-€5.16

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 31.8 mm...

Complete hardware kit for mounting brake rotors, sprockets and belt pulleys; fits most H-D brakes and drives.

€20.02 €25.18

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2"), Chrome, polished

-€5.16

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete kit with all necessary hardware for rotor, sprocket and belt mounting; fits most H-D brakes and drives.

€20.02 €25.18

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine