Engine (2)

-€4.78

COLONY Shifter Lever Stud and Bushing Kit — Silver, Steel

Complete kit with all hardware to mount the shifter lever by hand, plus a wave washer to reduce rattling. Made in the U.S.A.

€10.77 €15.55

Brake Drum Wheel Mounting Socket Screw Set — 3/8-20 socket head, parkerized black

-€5.55

COLONY Brake Drum Wheel Mounting Socket Screw Set — 3/8-20 socket...

Reproduction mounting kit with chip curls at the socket hole bottom, reproduction of hardened 3/8"-20 bolts, made in the U.S.A.

€21.60 €27.15

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€6.50

COLONY Transmission Top Cover Screw Kit — Chrome

OEM duplicate for mounting the transmission top cover. Made in the USA.

€25.32 €31.82

-€5.63

COLONY Clutch Adjusting Hole Cap — Clutch, Silver, Aluminum

Protects the clutch adjusting opening and gives a clean, finished appearance. Easy press-fit installation.

€12.69 €18.32

-€5.07

COLONY Primary Cover Filler Caps — Silver

Precision-machined filler caps that complete the primary cover with a clean, finished look. Made in the U.S.A.

€19.70 €24.77

-€3.49

COLONY Rear Master Cylinder Mounting Kit — Silver, zinc finish

Includes zinc-plated stud, bolt and washers. Kit for rear master cylinder mounting.

€13.57 €17.06

-€16.98

COLONY Head Bolt Set — 12-Point, Silver zinc-plated

Replacement head bolts, made in the USA. Sold as a set for engine reassembly.

€66.06 €83.04

-€16.98

COLONY Head Bolt Set — 12-point head, zinc-plated silver

Replacement head bolts. Made in the USA.

€66.06 €83.04

-€6.47

COLONY Bolt and Washer Kit — Rear sprocket kit, Silver

Bolt and washer kit for specific Harley-Davidson® motorcycle models. Made in U.S.A.

€25.15 €31.62

-€6.60

COLONY Bolt and Washer Kit — Sprocket, Silver

Bolt and washer kit for select Harley-Davidson® motorcycles. Made in U.S.A.

€25.68 €32.28

Primary Cover Bolt Kit — Chrome, Polished

-€9.01

COLONY Primary Cover Bolt Kit — Chrome, Polished

Replacement hardware kit for primary cover; made in the USA.

€35.01 €44.02

-€3.53

COLONY Jiffy Stand Mounting Kit — 3133-4, zinc finish

Complete zinc-plated hardware kit with pin, clip, washers and bushings for jiffy stand mounting.

€10.00 €13.53

-€4.30

COLONY Jiffy Stand Mounting Kit — 3134-4, Zinc

Mounting kit for Jiffy stand with pin, clip, washers and bushings included.

€16.68 €20.98

-€2.15

COLONY Jiffy Stand Clevis Pin Pretzel Clips — Zinc, 5-pack

Reproduction of the OEM 554A clip used on many 89 and up H-D kickstands.

€6.07 €8.22

-€6.14

COLONY Rocker Cover Bolt Kit — Chrome

Complete replacement hardware kit for rocker covers. Made in the USA.

€17.38 €23.52

-€1.96

COLONY Front Brake Rotor Torx Bolt Kit — 5/16-18 x 7/8 in, zinc

Torx bolt set for front brake rotor with Torx head design for secure fastening. Size 5/16-18 x 7/8 in.

€7.60 €9.56

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), Brake rotor, Chrome

-€4.34

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete hardware kit for mounting rotors, sprockets and belts; fits most H‑D brakes and drives; made in the U.S.A.

€16.90 €21.24

Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"), for cast rear wheel, Chrome

-€3.11

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 25.4 mm (1"),...

Complete hardware kit for mounting brake rotors, sprockets and belt drives. Includes all necessary hardware and fits virtually all H-D brakes, chain and belt drives.

€12.10 €15.21

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8"), hub-mounted rotors, cast front wheel, Chrome

-€3.37

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm...

Complete mounting hardware kit for rotor, sprocket and belt drives. Fits most H-D brakes and drives; includes all necessary hardware. Made in the U.S.A.

€13.13 €16.50

Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8 in), Chrome

-€4.17

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 22.2 mm (7/8...

Complete mounting hardware kit for rotor, sprocket and belt drives. Fits most Harley‑Davidson applications. Includes all necessary hardware. Made in the U.S.A.

€16.22 €20.39

Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm (1-3/4"), fits cast front and rear wheels, chrome

-€4.08

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm...

Complete kit with all hardware to mount rotors, sprockets and belts; fits virtually all H-D brake and drive systems. Made in the U.S.A.

€11.52 €15.60

Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm (1-1/2 in), Sprocket & Belt Pulley, Chrome

-€6.02

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 38.1 mm...

Complete hardware kit for installing rotors, sprockets and belt drives; fits most H-D brakes and drives.

€23.36 €29.38

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine