Engine (2)

-€41.92

S&S CYCLE Oil Line Kit — fits '07–'16 Touring, Black, Silver, Gold

Complete oil line kit for S&S crankcase installs on '07–'16 Touring models. Includes formed adapter, oil lines, fittings and clamps. Made in the USA.

€163.02 €204.94

-€4.58

EASTERN MOTORCYCLE PARTS Cam Shims — 0.45", 5-pack

Precision cam shims for accurate valve adjustment. Made in the U.S.A.

€12.93 €17.51

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€50.69

ANDREWS B2 Grind Cam — Exhaust close 25°

More mid-range and high-end power with a smooth idle. Best for 74/80 inch and small stroker engines. Requires spring spacing and main bearing boss clearance check.

€197.15 €247.84

-€8.88

S&S CYCLE Oil Pump Compression Return Fitting — 50-8120, Chrome

Precision compression return fitting for oil pump installations. Made in the USA. Easy to install.

€25.05 €33.93

-€19.12

S&S CYCLE Supply/Return Line Elbow — 90° return line, Black

Precision elbow fitting for fluid routing. Made in the USA. Easy to install.

€24.02 €43.14

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off psi. Spring alone provides the correct spring rate to control pop-off pressure and oil flow in the bypass port. Made in the United States.

€23.81 €29.93

-€84.68

S&S CYCLE 510C Camshaft Kit — 510 Series grind, Chain

Complete 510C camshaft kit with cams, gaskets and hardware; bolt-in fit for 88", 95", 96" and 103" CID engines; stock pushrods and springs acceptable; made in the USA.

€329.33 €414.01

570C Camshaft Kit — 88–103 CID, 570 Series grind, chain drive

-€84.68

S&S CYCLE 570C Camshaft Kit — 88–103 CID, 570 Series grind, chain drive

Complete camshaft kit for 88"–103" CID engines with 9:1–10:1 compression. Includes camshafts, gaskets, bearings, retaining ring, o-ring, thread lock and instructions. Strongest from 3200–3700 rpm. Requires high-lift valve springs; installer must verify coil bind and clearances. Made in the USA.

€329.33 €414.01

-€84.68

S&S CYCLE 585C Chain Drive Camshaft Kit — 585 Series grind

Mid-range focused cam kit for 88"–107" big-twin engines. Strongest 3500–6000 rpm (smaller engines) and 2500–5000 rpm (larger engines). Made in the USA. Installer must check coil bind and clearances.

€329.33 €414.01

-€1.65

S&S CYCLE Fitting 1/8-27 — 1/8" NPT female, silver

Easy-to-assemble, high-quality fitting for reliable connections.

€6.52 €8.17

-€3.00

S&S CYCLE Fitting 1/8-27 — 1/8" NPT male, brass

Easy-to-assemble high-quality fitting for reliable hose connections.

€11.66 €14.66

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

Reaper® Camshaft 574 Series — 255° exhaust, 240° intake, 0.574" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — 255° exhaust, 240° intake,...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design. Made in the USA.

€332.49 €417.99

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — P/N 2060, Standard

Complete camshaft installation kit with premium bearings, ARP® hardware, gaskets and seals. Made in the U.S.A.

€127.03 €159.70

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

Camshaft Installation Kit — Model Standard, Vendor Part Number 2070

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Model Standard, Vendor Part Number...

Complete kit with roller bearings, ARP® bolts, gaskets and hardware to install bolt-in and high-lift camshafts.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

Universal Oil Cooler — 6-row, 90°, bolt-on bottom mount, black powder-coated

-€39.69

JAGG OIL COOLERS Universal Oil Cooler — 6-row, 90°, bolt-on bottom mount, black...

High-quality universal oil cooler with fully-brazed construction. Ideal for custom builds and racing; mounting hardware sold separately.

€154.34 €194.03

-€109.47

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series, chain

Reduces crank compression for easier starting, then returns to full compression for normal performance. Bolt-in for 88"–106" Touring bikes with slip-on mufflers. Improves low-end and midrange torque. Not for OEM compression releases or compression ratios ≥10.0:1.

€425.73 €535.20

-€109.47

S&S CYCLE 583 Easy Start Camshaft Kit — 583 Series grind, S&S Cycle

Easy-start camshaft kit for Big Twin engines; optimized for Softail and Dyna, bolt-in and made in the USA.

€425.73 €535.20

583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°, Intake 204°

-€216.89

S&S CYCLE 583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°,...

Easy-start camshaft kit for Big Twin; optimized for Softail and Dyna, bolt-in, strong low-end torque; includes hardware; made in USA.

€843.44 €1,060.33

-€216.89

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear

Reduces cranking compression for easier starts; bolt-in kit for 88–124 CID engines; increases power from 3,000 rpm and holds to redline; includes complete hardware; not for OEM compression release models; Made in USA.

€843.44 €1,060.33

-€8.00

JAGG OIL COOLERS Thermostat Service Kit — Black

Complete kit of seals and components for quick thermostat service and maintenance. Made in the USA.

€31.13 €39.13

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€119.75

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series grind, chain

Reduces crank compression at startup for easier starting, then returns to full compression; improves low-end and midrange torque for Touring models.

€466.59 €586.34

Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

-€5.69

JAGG OIL COOLERS Miniature Thermal Switch — 12V, 180°F, NPT 1/8"

Compact automatic thermal switch. Normally open; activates 12V accessories at preset temperature. NPT 1/8" probe, easy wire connections, made in USA.

€22.14 €27.83

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine