Engine (2)

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

-€4.32

GARDNER-WESTCOTT Disc Brake Bolt Kit — Torx® socket, chrome finish

Durable fastener set for securing stopping components. Vehicles with dual assemblies require two sets. Made in the U.S.A.

€16.77 €21.09

Caliper Mounting Bolt Kit — Socket-head brake caliper, Chrome

-€8.99

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head brake caliper, Chrome

Replaces OEM caliper mounting bolts and washers; complete socket-head kit, made in the USA.

€34.95 €43.94

Nylock Shock Nuts — 5/8-18, cadmium finish, pair

-€1.01

GARDNER-WESTCOTT Nylock Shock Nuts — 5/8-18, cadmium finish, pair

Durable nylock nuts that lock under vibration for dependable suspension fastening.

€3.93 €4.94

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€61.48

GARDNER-WESTCOTT Big Twin Motor Sets — Stainless steel, Silver

Complete motor set for Big Twin: includes side covers, lifter base timing plug, inner primary mount, and front/rear motor mounts. Made in the U.S.A.

€239.13 €300.61

-€58.75

GARDNER-WESTCOTT Big Twin Motor Sets — P-80-84, Chrome

Complete motor mounting kit including side covers, lifter base timing plug and front/rear motor mounts. Made in the United States.

€228.48 €287.23

Handle Bar Lever & Switch Box Bolt Kit — Stainless steel, silver, socket-head kit

-€3.19

GARDNER-WESTCOTT Handle Bar Lever & Switch Box Bolt Kit — Stainless steel,...

Hardware set to secure handlebar levers and switch housings. Made in the U.S.A.

€12.40 €15.59

-€29.01

GARDNER-WESTCOTT Head Bolt Kit — 12-point flange, A-61-110

Includes four long and four short headbolts; made in the U.S.A.

€112.78 €141.79

-€6.63

GARDNER-WESTCOTT Button-Head Fender Rail Bolt Kit — 1" length

Six button-head bolts and A/N washers for mounting fender rails on Softail-style frames.

€25.77 €32.40

Socket Head Swingarm End Cap Bolt Kit — 7/16-14, 1-1/4", Chrome

-€6.36

GARDNER-WESTCOTT Socket Head Swingarm End Cap Bolt Kit — 7/16-14, 1-1/4", Chrome

Socket head bolts for swingarm end caps with a polished chrome finish. Made in the USA. Kit includes required hardware for one swingarm.

€24.74 €31.10

-€5.17

GARDNER-WESTCOTT Turn Signal Lens Bolt Kit — Chrome, P-61-13

Includes eight polished socket-head bolts and eight O-rings for front and rear turn signal lenses. Made in the U.S.A.

€20.13 €25.30

-€3.64

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Chrome, For Rear

Socket-head kit replaces OEM caliper mounting bolts and washers. Made in the USA.

€14.15 €17.79

-€1.57

GARDNER-WESTCOTT Taillight Lens Screw Kit — #8-32, 1", Chrome, Pair

Replacement screw kit for taillight lens. Made in the U.S.A. Durable hardware for a factory-correct fit.

€6.09 €7.66

-€3.59

GARDNER-WESTCOTT Lifter Base Screw Kit — 1/4-20, socket head, 8-pack, chrome

Complete screw kit for securing the lifter base; precision-made in the U.S.A.

€13.98 €17.57

-€3.99

GARDNER-WESTCOTT Adel Clamp — 4.8 mm (3/16"), 10 Pack

1/4" mounting holes with rubber guards; great for wiring, hoses, and cables. Made in the USA.

€15.52 €19.51

-€0.84

GARDNER-WESTCOTT Fork Drain Plugs — 35 mm fitment

Precision plugs for easier suspension tube maintenance and reliable sealing.

€3.27 €4.11

-€4.98

GARDNER-WESTCOTT Adel Clamp — 6.4 mm (1/4"), 10 pack, Black

Compact, multi-functional Adel clamp for securing wiring, hoses and cables. Internal rubber guards protect lines. Made in the USA.

€19.39 €24.37

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€5.85

GARDNER-WESTCOTT Adel Clamp — 7.9 mm (5/16"), 10 pack

Compact clamps with 1/4" mounting holes and internal rubber guards. Great for securing wiring, hoses and cables. Made in the USA.

€22.74 €28.59

-€6.10

GARDNER-WESTCOTT Adel Clamp — 9.5 mm (3/8"), 10 Pack

Clamps with 1/4" mounting holes and internal rubber guards. Ideal for routing wiring, hoses and cables. Made in the USA.

€23.70 €29.80

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine