Engine (2)

-€213.46

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Directs air through a side scoop to cool cylinder heads; includes a high-powered waterproof fan, temperature switch (activates at 140°F), manual override, wiring and hardware. Plug-and-play installation with no drilling. Not for "Twin Cooled" models.

€414.38 €627.84

-€53.92

ANDREWS Cams for M-Eight — 107", 114", stock compression

Bolt-in cam for M-Eight 107" and 114" engines; maintains stock compression and improves midrange torque.

€192.88 €246.80

-€50.40

ANDREWS Cams for M-Eight — 107 ci, 114 ci

Bolt-in cam for M-Eight engines; fits stock compression 107 ci and 114 ci.

€196.40 €246.80

-€53.92

ANDREWS Cams for M-Eight — Exhaust 236°/0.504", Intake 216°/0.105"

Bolt-in cam for stock-compression 107" and 114" M-Eight engines. Direct-fit upgrade to improve midrange performance and throttle response.

€192.88 €246.80

-€14.77

ANDREWS Cam Sprocket — 17T

Precision cam sprocket built for reliable valve timing and long service life.

€57.44 €72.21

-€50.40

ANDREWS M462 Cam — 220° exhaust, 200° intake, 0.460" lift

Bolt-in cam for 107"–114" engines. 127 ft lb torque, 109 hp from 1200–5500 rpm. Designed for strong midrange power and direct bolt-in fitment.

€196.40 €246.80

M464 Cam — Exhaust duration 230°, Intake duration 210°, Exhaust lift 0.460", Intake lift 0.464"

-€50.40

ANDREWS M464 Cam — Exhaust duration 230°, Intake duration 210°,...

Great mid-range torque and power with free-flow exhaust pipes and injector tuning.

€196.40 €246.80

-€8.96

JIMS Forceflow Cylinder Head Cooler Mount — Chrome

Secure, precision-machined mount for head coolers; fits many V-twin applications. 110" motors need optional adapter (sold separately).

€34.85 €43.81

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

554 Cam — 554 series grind, for 124"/128" big-bore motors, chrome

-€50.40

ANDREWS 554 Cam — 554 series grind, for 124"/128" big-bore motors, chrome

Fits 124" and 128" big-bore motors with head work. Made in the U.S.A. Requires hi-lift springs.

€196.40 €246.80

-€50.40

ANDREWS Camshaft — M520, Exhaust 248°, Intake 228°, Lift 0.520"

Precision-engineered camshaft, made in the U.S.A., for durable, smooth power delivery.

€196.40 €246.80

-€50.40

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€196.40 €246.80

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€50.40

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 €246.80

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine