Engine (2)

Tracker Series™ Piston Kit — Bore 3.508", Oversize +0.010", Stroke 3.812", CR 9.5:1

-€57.15

WISECO Tracker Series™ Piston Kit — Bore 3.508", Oversize +0.010",...

High-performance forged piston kit with ArmorGlide® skirt coating, precision rings, and force-fed pin oiling. Includes pistons, rings, pins, and circlips.

€161.69 €218.84

Tracker Series™ Piston Kit — 3.518" bore, 3-13/16" stroke, 1214 cc

-€57.15

WISECO Tracker Series™ Piston Kit — 3.518" bore, 3-13/16" stroke,...

Two-piston kit engineered for strong sealing, improved lubrication and reduced friction. Includes pistons, rings, pins and circlips. Made in the USA.

€161.68 €218.83

-€62.50

WISECO Tracker Series™ Piston Kit — 3.508" bore, 4.250" stroke, 1,345 cc

Forged pistons with generous valve pockets for big valves and cams.

Includes rings, piston pins and circlips for two pistons.

Force-fed pin oiling and a pressure-seal groove enhance sealing and durability.

€176.82 €239.32

Piston Kit — 4.016" bore, 4.5" stroke, 11.0:1 compression, 114 cu in

-€104.06

WISECO Piston Kit — 4.016" bore, 4.5" stroke, 11.0:1 compression, 114...

ArmorX™-coated pistons with ArmorFit™ skirts for smooth, quiet operation. Includes pistons, rings, piston pins and circlips. Fits OEM and Screamin’ Eagle heads. Made in the U.S.A.

€214.73 €318.79

-€104.06

WISECO Piston Kit — 4.077" piston, 11.3:1 compression, 118 ci

High-performance piston kit with ArmorFit™ and ArmorX™ coatings for reduced wear, improved sealing and reliable fitment.

€87.22 €191.28

-€10.86

ANDREWS Camshaft Drive Gear — 2.7670" diameter, P/N 212044

Precision camshaft drive gear engineered for reliable valve timing. Made in the U.S.A.; measured with .105 gauge pins.

€42.24 €53.10

-€10.60

ANDREWS Cam Drive Gear — Standard, 2.7354" diameter

High-quality heat-treated cam drive gear. Made in the U.S.A. Direct-fit replacement.

€41.20 €51.80

-€83.75

ANDREWS Cam Set for Chain Drive — 9 Series

Bolt-in cam set improving power from 1000–5400 rpm. Made from alloy steel billets; computer-designed profile. Uses stock springs. Installer must check clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — Grind 48H, Pair

Broad-tip cams tuned for strong low- and mid-range torque. Computer-aided design, billet alloy-steel construction, and heat-treated for durability. Made in USA.

€325.69 €409.44

-€95.59

WISECO Forged Piston Kit — 1200 cc, 12.0:1

High-performance piston kit with aerospace-grade alloys. Includes pistons, rings, pins, clips, and needle bearing when applicable. Dyno-tested for superior performance.

€270.44 €366.03

Cam Set for Chain Drive — 57 Series, Intake 236°, Exhaust 240°, Pair

-€83.75

ANDREWS Cam Set for Chain Drive — 57 Series, Intake 236°, Exhaust...

Computer-designed alloy-steel cam sets made in the USA; installer must verify clearances and splined cam drive sprocket compatibility.

€325.69 €409.44

High-Performance Replacement Ring Set — 3.875" bore, +0.010" oversize, 95" displacement

-€10.69

WISECO High-Performance Replacement Ring Set — 3.875" bore, +0.010"...

Includes rings for one piston only.

Designed specifically for compatibility with Wiseco pistons.

€15.51 €26.20

-€53.92

ANDREWS Cams for M-Eight — 107", 114", stock compression

Bolt-in cam for M-Eight 107" and 114" engines; maintains stock compression and improves midrange torque.

€192.88 €246.80

-€50.40

ANDREWS Cams for M-Eight — 107 ci, 114 ci

Bolt-in cam for M-Eight engines; fits stock compression 107 ci and 114 ci.

€196.40 €246.80

-€53.92

ANDREWS Cams for M-Eight — Exhaust 236°/0.504", Intake 216°/0.105"

Bolt-in cam for stock-compression 107" and 114" M-Eight engines. Direct-fit upgrade to improve midrange performance and throttle response.

€192.88 €246.80

-€13.23

ANDREWS Cam Sprocket — 17T

Precision cam sprocket built for reliable valve timing and long service life.

€56.31 €69.54

-€50.40

ANDREWS M462 Cam — 220° exhaust, 200° intake, 0.460" lift

Bolt-in cam for 107"–114" engines. 127 ft lb torque, 109 hp from 1200–5500 rpm. Designed for strong midrange power and direct bolt-in fitment.

€196.40 €246.80

M464 Cam — Exhaust duration 230°, Intake duration 210°, Exhaust lift 0.460", Intake lift 0.464"

-€50.40

ANDREWS M464 Cam — Exhaust duration 230°, Intake duration 210°,...

Great mid-range torque and power with free-flow exhaust pipes and injector tuning.

€196.40 €246.80

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

554 Cam — 554 series grind, for 124"/128" big-bore motors, chrome

-€50.40

ANDREWS 554 Cam — 554 series grind, for 124"/128" big-bore motors, chrome

Fits 124" and 128" big-bore motors with head work. Made in the U.S.A. Requires hi-lift springs.

€196.40 €246.80

-€50.40

ANDREWS Camshaft — M520, Exhaust 248°, Intake 228°, Lift 0.520"

Precision-engineered camshaft, made in the U.S.A., for durable, smooth power delivery.

€196.40 €246.80

-€50.40

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€196.40 €246.80

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€50.40

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€196.40 €246.80

-€2.98

PROX Main Bearing (Individual) — Main crankshaft

High-quality main bearing manufactured to original equipment manufacturer specifications for reliable performance.

€7.52 €10.50

-€3.02

PROX Main Bearing (Individual) — PROX, 23.6204C3, Main Crankshaft

Individual main bearing manufactured to exact OEM specifications for maximum quality and performance. Produced at leading OEM factories in Japan.

€7.64 €10.66

-€3.47

PROX Main Bearing (Individual) — Main Crankshaft

Manufactured at leading OEM factories, mainly in Japan. Made to exact OEM specifications for reliable fit and performance.

€8.74 €12.21

-€9.78

PROX Main Bearing (Individual) — PROX, Main crankshaft, 23.6206RSI

Individual main bearing made to OEM specifications for reliable performance and precise journal support.

€24.67 €34.45

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine