Engine (2)

-€53.92

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€209.67 €263.59

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€53.92

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€209.67 €263.59

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line, Silver, 10 Pack

-€4.00

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/16" ID fuel line,...

Stepless® ear clamps for fuel lines — 5 mm band, 360° stepless inner surface, tamper-evident, lightweight.

€11.31 €15.31

Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10 pack, silver

-€3.98

MOTION PRO Stepless® Ear Clamps for Fuel System — 1/4" ID, 5/16" ID, 10...

Stepless® ear clamps deliver a 360° gap-free seal with a narrow 5 mm band. Specially formed edges reduce damage and tampering is visible. Lightweight design. Side jaw clamp tool sold separately.

€11.26 €15.24

Stepless® Ear Clamps for Fuel System — 5/16" ID, 1/4" ID, 10 Pack, Silver

-€3.42

MOTION PRO Stepless® Ear Clamps for Fuel System — 5/16" ID, 1/4" ID, 10...

Stepless® ear clamps provide gap-free 360° sealing with a narrow 5 mm band to concentrate compression. Tamper-evident and lightweight. Side jaw tool sold separately (part# 3801-0182).

€9.65 €13.07

Stepless® Ear Clamps for Fuel System — 3/8" ID fuel line, silver raw

-€3.43

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/8" ID fuel line,...

Stepless® ear clamps designed for fuel systems. 360° stepless inner surface, narrow 5 mm band for concentrated seal compression, tamper-evident. Tool sold separately.

€9.68 €13.11

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

Stepless® Ear Clamps for Fuel System — 3/16" ID, 10 pack

-€3.29

MOTION PRO Stepless® Ear Clamps for Fuel System — 3/16" ID, 10 pack

Stepless® ear clamps provide a concentrated seal with a narrow 5 mm band, 360° stepless inner surface, visible tamper deformation, and a lightweight design.

€9.30 €12.59

Stepless® Ear Clamps for Fuel System — for 5/16 in ID fuel line, 10 Pack, Silver

-€4.03

MOTION PRO Stepless® Ear Clamps for Fuel System — for 5/16 in ID fuel...

Specially formed strip edges reduce risk of damage.
Narrow 5 mm band for concentrated seal compression.
360° Stepless® design with no gaps on the inner surface.
Tampering is visible; lightweight design.

€11.36 €15.39

Stepless® Ear Clamps for Fuel System — 1/4" ID, 10 Pack, Silver

-€4.15

MOTION PRO Stepless® Ear Clamps for Fuel System — 1/4" ID, 10 Pack, Silver

360° Stepless® design for a continuous inner seal, narrow 5 mm band for concentrated compression, tamper-visible and lightweight.

€11.73 €15.88

-€4.94

CUSTOM DYNAMICS Extended Seat Bolt — 50.8 mm (2"), Silver

Makes for quick installation and removal of the seat. Bolt has a 1/4"-20 thread pitch.

€19.19 €24.13

-€37.66

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€146.44 €184.10

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine