Engine (2)

-€84.11
Out of Stock

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets with all side covers and mounting hardware. Made in the U.S.A.

€327.08 €411.19

-€72.27
Out of Stock

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor set includes side covers, lifter base timing plug, inner primary mount, tip, front and rear motor mounts. Made in the U.S.A.

€281.01 €353.28

-€82.78
Out of Stock

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome finish

Complete motor set including side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€321.93 €404.71

-€10.46
Out of Stock

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head, Chrome, Silver

Precision replacement bolts and washers for caliper mounting; made in the USA.

€40.65 €51.11

-€1.40
Out of Stock

GARDNER-WESTCOTT Timing Cover Bolt Kit — C-20-37, Chrome

Complete bolt kit for timing cover installation. Includes necessary fasteners for a secure fit; easy to install.

€5.48 €6.88

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing, silver chrome

-€7.48
Out of Stock

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Precision fastener made in the U.S.A.; corrosion-resistant finish and easy installation.

€29.15 €36.63

-€1.32
Out of Stock

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes

Precision-machined drain plugs that simplify fork oil changes. Made in the USA.

€5.11 €6.43

Side Cover Bolt Kit — Chrome, Steel, P-10-14-01

-€40.91
Out of Stock

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome, Steel, P-10-14-01

Complete bolt set for cam, primary, oil hose and transmission side covers. Made in the U.S.A.

€159.03 €199.94

-€38.76
Out of Stock

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Complete bolt set for side cover replacement; includes cam, primary, oil hose cover and transmission side cover fasteners. Made in the U.S.A.

€150.77 €189.53

-€5.23
Out of Stock

GARDNER-WESTCOTT Transmission Top Cover w/Sensor Mount Bolt Kit — Chrome

Hardware kit for mounting and securing a sensor on the transmission top; includes all necessary fasteners. Made in the U.S.A.

€20.35 €25.58

Belt Sprocket Bolt Kit — Belt sprocket to hub mount, Socket-head, Chrome

-€7.28
Out of Stock

GARDNER-WESTCOTT Belt Sprocket Bolt Kit — Belt sprocket to hub mount,...

Complete fastening set for securing drive components to mating assemblies. Made in the U.S.A.

€28.33 €35.61

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63
Out of Stock

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63
Out of Stock

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78
Out of Stock

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64
Out of Stock

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€44.64
Out of Stock

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€39.78
Out of Stock

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€52.02
Out of Stock

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine