Engine (2)

Transmission Side Cover Bolt Kit — socket-head, chrome

-€12.64

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — socket-head, chrome

Complete bolt kit for transmission side cover; includes all necessary fasteners. Made in the USA.

€49.14 €61.78

-€20.07

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome, Steel

Complete bolt kit for primary and derby cover. Made in the U.S.A.

€78.08 €98.15

-€29.61

GARDNER-WESTCOTT Motor Mount Kit — Chrome

Secure mounting hardware for reliable engine support. Made in the U.S.A. Includes complete installation hardware.

€115.11 €144.72

-€84.11

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver

Complete motor set with all side covers and mounts
Includes lifter base timing plug and inner primary mount
Made in the U.S.A.

€327.08 €411.19

-€72.27

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets including all side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€281.01 €353.28

-€82.78

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets with side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€321.93 €404.71

-€10.46
Out of Stock

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Rear, Chrome

Replaces OEM caliper mounting bolts and washers. Made in the USA.

€40.65 €51.11

-€1.40

GARDNER-WESTCOTT Timing Cover Bolt Kit — Chrome, Polished, Steel

Complete bolt kit for timing cover replacement. Made in the U.S.A.; includes necessary fasteners for service.

€5.48 €6.88

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing

-€7.48

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Durable precision fastener for secure component mounting. Made in the U.S.A.

€29.15 €36.63

-€1.32
Out of Stock

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes, Chrome

Simplifies fork oil changes and helps protect fork internals. Made in the USA.

€5.11 €6.43

Metal Base Gaskets — Cylinder base, 0.51 mm (0.020"), front/rear, pair

-€10.79

JAMES GASKET Metal Base Gaskets — Cylinder base, 0.51 mm (0.020"),...

Genuine James Gasket base gaskets with a steel base and silicone beading on both sides. Flexible construction; no gasket sealer required. Made in the USA.

€36.72 €47.51

-€40.91

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Includes cam, primary, oil hose cover and transmission side cover. Made in the U.S.A.

€159.03 €199.94

-€38.76

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Complete bolt kit for side covers; includes cam, primary, oil hose cover and transmission side cover.

€150.77 €189.53

-€5.23

GARDNER-WESTCOTT Transmission Top Cover w/Sensor Mount Bolt Kit — Chrome

Secures the transmission top cover and sensor mount with a precision fit. Made in the U.S.A.

€20.35 €25.58

Belt Sprocket Bolt Kit — Belt sprocket to hub mount, Chrome

-€7.28
Out of Stock

GARDNER-WESTCOTT Belt Sprocket Bolt Kit — Belt sprocket to hub mount, Chrome

Complete bolt kit for securing the belt sprocket to the hub; includes all mounting hardware. Made in the U.S.A.

€28.33 €35.61

Fork Drain Screw Kit — Fork slider, chrome

-€2.27

JAMES GASKET Fork Drain Screw Kit — Fork slider, chrome

Includes screws and seal washers. Easy installation; verify compatibility before fitting.

€7.73 €10.00

-€11.27

JAMES GASKET Primary Gasket — Primary cover

Top-quality primary gasket with silicone beading; made in the USA.

€38.32 €49.59

Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever & Starter Housing

-€6.50

JAMES GASKET Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever &...

Complete gasket and seal kit for the deflector plate that prevents leaks and restores reliable sealing. Made in the USA.

€22.07 €28.57

-€102.96

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€291.05 €394.01

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine