Engine (2)

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€13.04

JAMES GASKET Cam Cover Gasket — 0.79 mm, 5-pack

Replacement gaskets for cam chests. Made in the USA.

€44.33 €57.37

High-Performance Replacement Ring Set — Bore 3.875", Displacement 103 cu in

-€9.22

WISECO High-Performance Replacement Ring Set — Bore 3.875",...

Replacement ring set for one piston; verify piston compatibility before purchase.

€26.09 €35.31

High-Performance Replacement Ring Set — Bore 3.875", Oversize +0.020", Displacement 95", VM Series

-€11.86

WISECO High-Performance Replacement Ring Set — Bore 3.875", Oversize...

Replacement rings for one piston; fit only matching pistons from the same manufacturer. Sold as a set for one piston.

€33.53 €45.39

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover, JGI-11293-K

-€11.86

JAMES GASKET Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover,...

Complete gasket and o-ring kit to seal four pushrod covers; includes gaskets, o-rings, chrome-plated allen bolts and washers. Made in USA.

€33.45 €45.31

Complete Motor Gasket Kit — Bore 3.875 in, Thickness 1.02 mm (0.040 in)

-€40.18

JAMES GASKET Complete Motor Gasket Kit — Bore 3.875 in, Thickness 1.02 mm...

Complete gasket kit with gaskets, oil seals and O-rings for a full engine rebuild. Made in the USA.

€136.64 €176.82

Transmission Gasket/Seal Kit — JAMES GASKET, JGI-33031-06

-€38.45

JAMES GASKET Transmission Gasket/Seal Kit — JAMES GASKET, JGI-33031-06

Comprehensive transmission gasket and seal kit. Available with gaskets and seals. Made in the USA.

€108.59 €147.04

Metal Base Gaskets — Cylinder base, 0.51 mm (0.020"), front/rear, pair

-€10.79

JAMES GASKET Metal Base Gaskets — Cylinder base, 0.51 mm (0.020"),...

Genuine James Gasket base gaskets with a steel base and silicone beading on both sides. Flexible construction; no gasket sealer required. Made in the USA.

€36.72 €47.51

Fork Drain Screw Kit — Fork slider, chrome

-€2.27

JAMES GASKET Fork Drain Screw Kit — Fork slider, chrome

Includes screws and seal washers. Easy installation; verify compatibility before fitting.

€7.73 €10.00

-€11.27

JAMES GASKET Primary Gasket — Primary cover

Top-quality primary gasket with silicone beading; made in the USA.

€38.32 €49.59

Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever & Starter Housing

-€6.50

JAMES GASKET Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever &...

Complete gasket and seal kit for the deflector plate that prevents leaks and restores reliable sealing. Made in the USA.

€22.07 €28.57

-€102.96

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€291.05 €394.01

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64
Out of Stock

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine