Engine (2)

-€98.37

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€2.07

EASTERN MOTORCYCLE PARTS Cam Bearing Retaining Ring — Outer, Cam Gear, 10 pack

High-quality OEM replacement components for cam bearing assemblies.

€5.86 €7.93

-€2.57

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005", 10-pack

Essential shims for precise cam setup. Made in the USA.

€7.27 €9.84

High-Performance Piston Kit — 3.4955 in piston diameter, 10.5:1 compression, 1200 cc displacement

-€93.31

WISECO High-Performance Piston Kit — 3.4955 in piston diameter,...

Complete top-end piston rebuild kit with X-Ring package and hardware. Made in the USA.

€264.01 €357.32

-€2.57

EASTERN MOTORCYCLE PARTS Cam Shims — 0.010", 2nd gear, 10-pack

Precision shims for setting up new cams. Made in the USA.

€7.27 €9.84

Extreme Sealing Technology Complete Gasket Kit — For '89-'91 Softail/Dyna, 1.02 mm (0.040")

-€77.87

COMETIC Extreme Sealing Technology Complete Gasket Kit — For '89-'91...

Full gasket kit with MLS head gaskets, Viton-coated base gaskets, AFM exhaust seals and valve stem seals. Made in USA.

€220.34 €298.21

$Cam Gear Thrust Washers — Size 0.040\", 5-pack$

-€4.70

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — Size 0.040\", 5-pack

Absorbs axial camshaft loads; precision machined; made in the USA.

€13.25 €17.95

Piston Kit with Gaskets — Piston diameter 3.934", Displacement 1746 cc

-€152.67

WISECO Piston Kit with Gaskets — Piston diameter 3.934", Displacement...

Forged high-silicon aluminum pistons with Armor Plating; kit includes pistons, pins, retainer clips, top-end gasket kit and VM-Rings. Made in USA.

€431.93 €584.60

-€51.96

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

-€1,212.13

S&S CYCLE Top End Kit — 74 cu in, 3-7/16" bore, 8.0:1 compression

Complete S&S top-end kit with heads, pre-fit forged pistons, and all necessary hardware for quick installation.

€3,425.64 €4,637.77

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

-€723.44

S&S CYCLE Top End Kit — 3-1/2" bore, 80", 8.0:1

Complete top-end kit with S&S Shovelhead-style heads, stock-bore cylinders, pre-fit forged pistons, hardware and gaskets. Made in USA.

€2,813.38 €3,536.82

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€419.97

S&S CYCLE 91 cc Super Stock® Cylinder Heads — Powder-coated Wrinkle Black

High-flow 91 cc Super Stock® cylinder heads for S&S® T-Series T2 long block engines; supports up to .650" cam lift and fits stock rocker boxes and manifolds when used with appropriate hardware.

€1,633.25 €2,053.22

Extreme Sealing Technology Complete Gasket Kit — For '04-'06 XL 1200, 3.500" bore, 1.02 mm (0.040")

-€45.03
Out of Stock

COMETIC Extreme Sealing Technology Complete Gasket Kit — For '04-'06...

Complete gasket kit featuring MLS head gaskets, steel Viton®-coated base gaskets, blue Viton valve stem seals, and AFM race-style exhaust gaskets. Includes motor gasket set plus primary, derby, and inspection cover gaskets where applicable. Made in the USA.

€127.43 €172.46

-€51.96

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17 Twin Cams, Black powder-coated

-€213.62

S&S CYCLE 4-1/8" Bore Cylinder — 4.125" bore, 4.625" stroke, for '99-'17...

Bored slightly under nominal and supplied un-honed with a stock bolt pattern; made for 124" Hot Set Up Kits on '99-'17 Twin Cams. Requires crankcase machining.

€830.76 €1,044.38

-€115.92
Out of Stock

WISECO Piston Kit — 3.937", 4-3/8", 11:1, 1746 cc

ArmorX™-coated pistons with ArmorFit™ skirt coating for smooth, quiet operation. Includes pistons, rings, pins and circlips. Made in the U.S.A.

€327.99 €443.91

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

Piston Kit — 4.077" piston, 114 CI displacement, 11.0:1 compression

-€115.92

WISECO Piston Kit — 4.077" piston, 114 CI displacement, 11.0:1...

ArmorX™ coated piston kit with ArmorFit™ skirts, dome design for efficient burn, dedicated rings, and complete hardware included.

€327.99 €443.91

-€0.93

COMETIC Dip Stick O-Rings — COMETIC, Buna, 5-pack

Premium fuel-resistant seals for long-term reliability and leak prevention.

€3.14 €4.07

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke, 11:1 compression

-€114.36

WISECO Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke,...

High-performance Wiseco piston kit with ArmorX™ coating and ArmorFit™ skirt. Includes pistons, rings, piston pins and circlips. Fits OEM and Screamin’ Eagle heads. Made in the U.S.A.

€323.56 €437.92

-€115.92

WISECO Piston Kit — 4.250" bore, 4-3/8" stroke, 11.0:1 compression

Two-piston kit with rings, piston pins and circlips. ArmorX™ coating and ArmorFit™ skirt reduce wear and noise while improving sealing; fits OEM and Screamin’ Eagle heads.

€327.99 €443.91

-€20.43
Out of Stock

COMETIC Primary Gasket Kit — Primary, Kit

Complete set of primary gaskets, seals and O-rings for inner and outer primary; heat resistant and high shape recovery; no sealer required.

€57.78 €78.21

$Tracker Series™ Piston Kit — Bore 3.895\", Stroke 4.000\", 1562 cc$

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.895\", Stroke 4.000\",...

Two-piston kit with forged crowns, precision-fit rings, force-fed pin oiling and ArmorGlide® skirt coating for improved durability and sealing.

€193.19 €261.47

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine