Engine (2)

-€73.75

JIMS Low-Profile Billet Tappet Covers/Pushrod Cover Kit — Black

Low-profile billet tappet and pushrod cover kit; fits Twin Cam pushrod covers only; sits 1/2" lower than stock; includes gaskets, O-rings and screws; made in USA.

€286.83 €360.58

-€55.92
Out of Stock

JIMS Piston Oiling Jet Kit — Silver

High-flow piston oiling jet kit designed for stock and high-performance flywheels; modified for stroker applications. Made in the U.S.A.

€217.44 €273.36

-€13.47
Out of Stock

JIMS Idler Shaft with Bushing — JIMS, 25791-KIT

Includes shaft and bushing. Made in the U.S.A. Kit for idler gear applications.

€52.38 €65.85

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Transmission Side Cover Bolt Kit — P-10-12-07, Socket-head, Steel, Chrome

-€13.59
Out of Stock

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — P-10-12-07, Socket-head,...

Complete hardware set for reinstalling the side cover of the transmission. Made in the USA.

€52.90 €66.49

Transmission Side Cover Bolt Kit — socket-head, chrome

-€12.64
Out of Stock

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — socket-head, chrome

Complete bolt kit for transmission side cover; includes all necessary fasteners. Made in the USA.

€49.14 €61.78

-€20.07

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome

Hardware kit for primary and derby cover installation. Made in the U.S.A.

€78.08 €98.15

-€29.61
Out of Stock

GARDNER-WESTCOTT Motor Mount Kit — Chrome, Front

Durable engine support assembly made in the U.S.A., with precision components and complete hardware for secure mounting.

€115.11 €144.72

-€84.11

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver

Complete motor set with all side covers and mounts
Includes lifter base timing plug and inner primary mount
Made in the U.S.A.

€327.08 €411.19

-€72.27

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets including all side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€281.01 €353.28

-€82.78

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets with side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€321.93 €404.71

-€10.46
Out of Stock

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Rear, Chrome

Replaces OEM caliper mounting bolts and washers. Made in the USA.

€40.65 €51.11

-€1.40

GARDNER-WESTCOTT Timing Cover Bolt Kit — C-20-37, Chrome

Complete bolt kit for timing cover installation. Includes necessary fasteners for a secure fit; easy to install.

€5.48 €6.88

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing

-€7.48

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Durable precision fastener for secure component mounting. Made in the U.S.A.

€29.15 €36.63

-€1.32
Out of Stock

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes

Precision-machined drain plugs that simplify fork oil changes. Made in the USA.

€5.11 €6.43

-€40.91

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Includes cam, primary, oil hose cover and transmission side cover. Made in the U.S.A.

€159.03 €199.94

-€38.76

GARDNER-WESTCOTT Side Cover Bolt Kit — Chrome

Complete bolt kit for side covers; includes cam, primary, oil hose cover and transmission side cover.

€150.77 €189.53

-€5.23

GARDNER-WESTCOTT Transmission Top Cover w/Sensor Mount Bolt Kit — Chrome

Hardware kit for mounting and securing a sensor on the transmission top; includes all necessary fasteners. Made in the U.S.A.

€20.35 €25.58

Belt Sprocket Bolt Kit — Belt sprocket to hub mount, Socket-head, Chrome

-€7.28
Out of Stock

GARDNER-WESTCOTT Belt Sprocket Bolt Kit — Belt sprocket to hub mount,...

Complete fastening set for securing drive components to mating assemblies. Made in the U.S.A.

€28.33 €35.61

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

-€14.11

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company