Engine (2)

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°

More power than the 525 cams while maintaining low-end torque. Extremely smooth lobe profile for a quiet valve train and smooth cruise. Bolt-in for many 88"–103" engines; improves starting, throttle response and fuel mileage. Performance valve springs required on '99–'04 engines.

€366.15 €460.30

Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°, Exhaust lift 0.604", Intake lift 0.594"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°,...

High-performance camshaft that broadens the torque band and boosts horsepower across a wide range of displacements. Requires supporting high-performance components and tuning.

€366.15 €460.30

-€9.68
Out of Stock

COMETIC Transmission Gasket Kit — 5-speed

Complete set of gaskets, seals and O-rings for reliable, long-lasting sealing. Made in the USA.

€32.85 €42.53

Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift 0.594"/0.604"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift...

Fierce-performing camshaft for large (103", 110", 124") and small 95" displacement engines; requires upgraded valve springs, pushrods, lifters, intake/exhaust and clutch.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255°/0.594", Exhaust 260°/0.604"

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°/0.594", Exhaust...

Fierce-performing camshaft tuned for both large and small displacements; optimized for broad torque and horsepower gains across wide rpm ranges.

€340.80 €428.44

HP+® Camchest Kit — Chain drive, 543 Series grind, intake & exhaust

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, 543 Series grind, intake &...

Complete camchest rebuild kit for '99–'06 Twin Cam (except '06 Dyna). Includes all components for cooler temps, higher oil pressure and quieter operation.

€1,636.28 €2,057.04

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — For '99-'06 Twin Cam, gear drive

Complete camchest rebuild kit for '99-'06 Twin Cam (except '06 Dyna). Increases oil pressure and flow, lowers engine and oil temps, reduces blow-by, and includes all bearings, gaskets and hardware for installation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

Complete camchest rebuild kit that improves oil flow, raises oil pressure, reduces engine and oil temperatures, and smooths operation. Fits '07–'17 Twin Cam and '06 Dyna.

€1,636.28 €2,057.04

HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07–'17 Twin Cam and '06 Dyna that increases oil pressure, lowers engine and oil temps, and smooths operation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07-'17 Twin Cam and '06 Dyna. Improves oil pressure, scavenge and cooling for cooler, more reliable operation.

€1,636.28 €2,057.04

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — Gear, Exhaust 248°, Intake 238°

Excellent bolt-in camshaft for stock to mid 96" and 103" engines; works well in many 88" and 96" applications. Smooth lobe layout for quiet operation and the smoothest cruise power band. Improves starting, throttle response and fuel economy; performance valve springs required on '99–'04 engines.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255° / 0.594" lift, Exhaust 260° / 0.604" lift

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255° / 0.594" lift,...

High-performance camshaft tuned for large-displacement 103", 110" and 124" engines and high-revving 95" applications; requires valvetrain, fueling and clutch upgrades.

€366.15 €460.30

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°

High‑performance cam that delivers strong mid and top end power while retaining low‑end usability. Requires carburetor/throttle body tuning, performance exhaust and intake, and upgraded valve train components. 2500–6900+ RPM.

€366.15 €460.30

-€104.59
Out of Stock

FEULING OIL PUMP CORP. Reaper® 580 Cam — 0.580" lift, 268° exhaust / 258° intake

High-performance camshaft that shifts the powerband higher for more top-end horsepower. Requires high-lift springs, upgraded pushrods and lifters, plus high-flow intake and performance exhaust.

€406.75 €511.34

-€12.90
Out of Stock

COMETIC Transmission Gasket Kit — COMETIC C9151

Comprehensive set of gaskets, seals and O-rings; made in the USA for long-term reliability.

€43.83 €56.73

Extreme Sealing Technology Rocker Box Gasket Kit — For S&S die-cast rocker boxes

-€13.37
Out of Stock

COMETIC Extreme Sealing Technology Rocker Box Gasket Kit — For S&S...

Complete gasket kit with all seals, O‑rings and bolt seals for both rocker boxes. Made in the USA.

€45.45 €58.82

Reaper® 543 Cam — 543 Series, 248°/238° duration, 0.553"/0.543" lift

-€62.84
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, 248°/238° duration,...

More power than 525 cams without sacrificing low-end torque. Smooth lobe layout for a quiet valve train and smooth cruise power band. Bolt-in for stock to mid 96" and 103" engines; also works well in 88" and 96" engines. Easier starting, improved throttle response and fuel mileage. 1900–6000 RPM power range. '99–'04 require performance valve springs; pushrods and lifters recommended.

€244.35 €307.19

-€62.84
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°

High-performance camshaft for 95" to 124" engines—broad torque for heavy bikes and high-rev power for lighter machines; requires supporting high-performance components.

€244.35 €307.19

-€16.41
Out of Stock

FEULING OIL PUMP CORP. Hydraulic Cam Chain Tensioner Assembly — Outer, Aluminum

Stock-replacement hydraulic tensioner assembly. Precision billet housings, PTFE-enhanced nylon pads, single-piston design, ARP® 12-point hardware. Fits '07-'17 and conversion camplates for early '99-'06 camshafts.

€63.82 €80.23

Hydraulic Cam Chain Tensioner Assembly — fits 2007–2017 camplates, early 1999–2006 camshafts, inner mount

-€16.41
Out of Stock

FEULING OIL PUMP CORP. Hydraulic Cam Chain Tensioner Assembly — fits 2007–2017...

Direct-fit stock replacement hydraulic cam chain tensioner assembly with precision billet housing, PTFE-enhanced pads and ARP® hardware; fits 2007–2017 and early 1999–2006 camplates.

€63.82 €80.23

OE+® Hydraulic Cam Chain Tensioner Conversion Kit — fits '07–'17 Twin Cam, '06 Dyna, '99–'06 camchest

-€107.43
Out of Stock

FEULING OIL PUMP CORP. OE+® Hydraulic Cam Chain Tensioner Conversion Kit — fits...

Replacement kit to convert or replace hydraulic cam chain tensioners on stock '07–'17 Twin Cam, '06 Dyna and '99–'06 camchest kits; includes sprockets, chains, spacers and tensioner assemblies. Made in the USA.

€417.77 €525.20

Primary Gasket Pack — 1.52 mm (0.060"), 5 Pack, Aluminum Foam Material

-€42.55
Out of Stock

COMETIC Primary Gasket Pack — 1.52 mm (0.060"), 5 Pack, Aluminum Foam...

High-quality primary gasket pack with multiple gasket types for durable, fuel-resistant sealing. Made in the U.S.A.

€120.25 €162.80

-€107.43
Out of Stock

FEULING OIL PUMP CORP. Hydraulic Tensioner Kit — 8083

Comprehensive kit to convert early mechanical Twin Cam® cam chain tensioners to late-style hydraulic systems. Includes sprockets, alignment spacers, inner and outer cam chains, and hydraulic tensioner assemblies. Compatible with multiple camchest and oiling systems. Conversion camshafts sold separately. Made in USA.

€417.77 €525.20

-€10.88
Out of Stock

COMETIC Cylinder Head Gasket — 3.8125" bore, 0.76 mm thickness, MLS

High-quality cylinder head gasket engineered for long-lasting seals. Multi-layer and composite options resist heat, creep and cracking. Made in the USA.

€36.97 €47.85

-€10.88
Out of Stock

COMETIC Cylinder Head Gasket — 3.8125" bore, 1.02 mm thickness, MLS

High-quality cylinder head gasket made from fuel-resistant materials for long-term reliability. Made in the USA.

€36.97 €47.85

-€2.25
Out of Stock

COMETIC Oil Pump Gasket — 0.25 mm (0.010"), Oil Pump Body, 10-pack

High-quality, fuel-resistant oil pump gasket with AFM construction and aluminum core bonded to a nitrile rubber coating. Made in the USA.

€7.61 €9.86

-€62.16
Out of Stock

FEULING OIL PUMP CORP. Reaper® 405 Cam — 405 Series, 205° exhaust, 200° intake

Direct bolt-in replacement for M8 engines that increases torque and horsepower across the rpm range. Works with slip-on or full exhaust. Made in the USA.

€241.81 €303.97

-€1.23
Out of Stock

COMETIC Shifter O-Ring — 25 pack, Viton, Shifter shaft

Replacement sealing ring for shift mechanisms. Fuel-resistant and built for long-term reliability. Made in the U.S.A.

€3.47 €4.70

-€2.64
Out of Stock

COMETIC Top End Gasket Kit — 4-Stroke, 1.52 mm (0.060")

Complete top-end gasket kit with base and head gaskets, cylinder O-rings and all top-end seals for a full R&R.

€7.45 €10.09

Race Series® Chain Drive Camshaft Kit — 465 Series grind, Intake 207°, Exhaust 236°

-€161.29
Out of Stock

FEULING OIL PUMP CORP. Race Series® Chain Drive Camshaft Kit — 465 Series grind,...

Complete camshaft kit with Reaper® camshaft and full-travel hydraulic lifters. Includes gasket/o-ring kit, ARP® fasteners, and installation hardware. Made in the USA. Not for '23–'24 121" VVT motors.

€627.24 €788.53

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine