Engine (2)

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L., Oversize (+0.002")

-€2.71

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L.,...

Replacement wrist pin bushing made to exact tolerances. Made in the USA. Oil holes not included; drill after installation.

€7.69 €10.40

-€8.79

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Replacement wrist pin bushing made to exact tolerances. Made in USA. Oil holes not included; drill after installation.

€24.86 €33.65

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

Stepless® Ear Clamps for Fuel System — 5/16" ID vinyl, 1/4" ID braided, 10 pack, Silver

-€3.42

MOTION PRO Stepless® Ear Clamps for Fuel System — 5/16" ID vinyl, 1/4" ID...

360° stepless inner surface with no gaps, specially formed strip edges to prevent damage, narrow 5 mm band for concentrated seal compression, tamper-evident, lightweight design. Side jaw clamp tool sold separately.

€9.65 €13.07

-€39.85

KIBBLEWHITE Racing Valve Spring Kit — 0.600" lift, 347 lb open, 148 lb seat

Progressively wound racing valve springs offering improved fatigue life and consistent high-rpm performance.

€144.74 €184.59

Shouldered C630 Bronze Valve Guide — Inside diameter 0.3098", Length 2.100"

-€8.35

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Inside diameter 0.3098",...

Precision-machined nickel bronze construction for excellent wear resistance and heat conductivity.

Compatible with no-lead fuel; accepts various valve-stem materials.

Accepts special valve guide seals (sold separately). Made in USA.

€23.64 €31.99

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), 0.3098" ID, 2.100" L

-€7.05

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"),...

Precision-machined shouldered valve guide for superior wear resistance and efficient heat dissipation.

€19.98 €27.03

Powdered Metal Valve Seats — 1.535" inside diameter, 1.969" outside diameter, 0.453" seat height

-€3.62

KIBBLEWHITE Powdered Metal Valve Seats — 1.535" inside diameter, 1.969"...

High-density powdered metal valve seats with exceptional wear resistance and thermal properties; track- and street-tested and made in the USA.

€10.23 €13.85

Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007", Height 0.450"

-€4.11

KIBBLEWHITE Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007",...

High-density powdered metal valve seats engineered for wear resistance and thermal stability. Track- and street-tested for multi-valve, high-RPM applications. Standard set uses two intake and two exhaust seats.

€11.61 €15.72

-€9.31

KIBBLEWHITE Nitrided Valve — 1.715" head, 0.3100" stem, 4.480" length

One-piece, stellite-tipped nitrided valve with surface buildup to reduce wear and friction; corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€26.28 €35.59

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420" length

-€6.08

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420"...

Nitrided one-piece stainless-steel valve with stellite tip for superior wear resistance and reduced friction. Made in the USA.

€20.66 €26.74

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

-€9.07

KIBBLEWHITE C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

Precision-machined C63000 bronze valve guides with tapered nose for improved flow; OEM-style fitment; top-hat seals sold separately; made in USA.

€25.65 €34.72

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

Cast Iron Valve Guide — 0.3085 in ID, 1.770 in L

-€2.34

KIBBLEWHITE Cast Iron Valve Guide — 0.3085 in ID, 1.770 in L

Precision-machined cast-iron valve guide compatible with unleaded fuel; OEM-style replacement.

€7.97 €10.31

C630 Valve Guides — Oversize +0.001, 1.770" length, 0.3085" ID, C630 Bronze

-€7.41

KIBBLEWHITE C630 Valve Guides — Oversize +0.001, 1.770" length, 0.3085"...

Precision valve guides with tapered nose design, no-lead fuel compatibility, and top-hat seal fitment. Made in the USA.

€20.94 €28.35

-€3.14

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.001"), ID 0.3085", L 1.770"

Precision-machined cast iron valve guide compatible with unleaded fuel and all valve-stem materials. Made in the USA.

€8.89 €12.03

Cast Iron Valve Guide — Oversize (+0.001 in), ID 0.3375 in, L 1.770 in

-€2.60

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.001 in), ID 0.3375 in, L...

Precision valve guide compatible with no-lead fuel and multiple valve-stem materials. Made in the USA.

€7.38 €9.98

-€2.88

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.002"), ID 0.3085", L 1.770"

Precision-machined cast iron valve guide compatible with no-lead fuel. Made in the USA.

€8.13 €11.01

-€2.88

KIBBLEWHITE Cast Iron Valve Guide — Oversize (+0.002"), 0.3375" ID, 1.770" L

Precision-machined cast iron valve guide compatible with no-lead fuel and a variety of valve-stem materials. Made in the USA.

€8.13 €11.01

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Shouldered C630 Bronze Valve Guide — Oversize (+0.002"), ID 0.3098", Length 2.100"

-€6.03

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.002"), ID...

Precision-machined valve guide with 5% nickel for wear resistance and ~80% copper for heat conductivity. Compatible with no-lead fuel and special seals (sold separately). Made in the USA.

€17.08 €23.11

-€6.03

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.002"), ID...

Precision-machined nickel-bronze valve guide with superior wear resistance and heat conductivity. Compatible with no-lead fuel. Made in the USA.

€17.08 €23.11

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3098" ID, 2.100" L

-€2.60

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), 0.3098"...

Precision-machined shouldered valve guide compatible with no-lead fuel; accepts special seals (sold separately). Made in the U.S.A.

€7.38 €9.98

Shouldered Cast Iron Valve Guide — Oversize (+0.002"), ID 0.3098", Length 2.100"

-€2.41

KIBBLEWHITE Shouldered Cast Iron Valve Guide — Oversize (+0.002"), ID...

Precision-machined cast iron valve guide compatible with no-lead fuel; accepts special seals (sold separately).

€7.20 €9.61

Shouldered C630 Bronze Valve Guide — Oversize (+0.003"), 0.3098" ID, 2.100" length

-€5.72

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.003"),...

Precision-machined shouldered valve guide; compatible with no-lead fuel. Sold each.

€22.24 €27.96

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company