Engine (2)

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

-€22.50

FEULING OIL PUMP CORP. Camshaft Installation Kit — Camshaft

Complete camshaft installation kit with gasket set, bearings, ARP® bolts and necessary o-rings; made in the USA.

€87.50 €110.00

-€5.78

FEULING OIL PUMP CORP. Pressure Relief Kit — FEULING PARTS 8002

Increases relief valve pop-off psi; kit includes valve plunger, spring and roll pin; spring controls pop-off pressure and oil flow; made in the USA.

€22.45 €28.23

-€109.47

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series, chain

Reduces crank compression for easier starting, then returns to full compression for normal performance. Bolt-in for 88"–106" Touring bikes with slip-on mufflers. Improves low-end and midrange torque. Not for OEM compression releases or compression ratios ≥10.0:1.

€425.73 €535.20

-€109.47

S&S CYCLE 583 Easy Start Camshaft Kit — 583 Series grind, S&S Cycle

Easy-start camshaft kit for Big Twin engines; optimized for Softail and Dyna, bolt-in and made in the USA.

€425.73 €535.20

583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°, Intake 204°

-€216.89

S&S CYCLE 583 Easy Start Camshaft Kit — Grind 583 Series, Exhaust 262°,...

Easy-start camshaft kit for Big Twin; optimized for Softail and Dyna, bolt-in, strong low-end torque; includes hardware; made in USA.

€843.44 €1,060.33

-€216.89

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear

Reduces cranking compression for easier starts; bolt-in kit for 88–124 CID engines; increases power from 3,000 rpm and holds to redline; includes complete hardware; not for OEM compression release models; Made in USA.

€843.44 €1,060.33

Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake, 0.535" exhaust lift, 0.525" intake lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series, 236° exhaust, 226° intake,...

Bolt-in camshaft that broadens the torque band, improves fuel economy and boosts low- and mid-range power; compatible with factory valve springs, pushrods and lifters.

€332.49 €417.99

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive

Complete camchest overhaul kit that lowers engine and oil temperatures, increases oil pressure and improves smoothness and reliability. Includes high-volume oil pump, Reaper® camshafts, hydraulic roller lifters, Timken® bearings and ARP® fasteners. Fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€119.75

S&S CYCLE 551 Easy Start Camshaft Kit — 551 Series grind, chain

Reduces crank compression at startup for easier starting, then returns to full compression; improves low-end and midrange torque for Touring models.

€466.59 €586.34

-€119.17

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Reduces crank compression for easier starts; bolt-in kit for 88"/95"/103" engines, power gain 3200–5700 rpm. Includes camshafts, gasket, bearings, retaining ring, o-ring, thread lock and instructions. Not for models with OEM compression releases.

€346.94 €466.11

-€118.34

S&S CYCLE 583 Easy Start Camshaft Kit — 583 series grind, chain

Bolt-in camshaft kit that eases starting by reducing initial crank compression; delivers strong low-end torque for Softail and Dyna. Includes cams and installation hardware; made in the USA.

€461.14 €579.48

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — 551 Series, Chain

Bolt-in camshaft kit for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque, strongest at 1,000–4,000 rpm. For '06 Dyna and '07-'17 Twin Cam hydraulic tensioner chain drive systems. Not recommended for 10:1+ compression.

€329.33 €414.01

-€84.68

S&S CYCLE 510C Camshaft Kit — 510 Series, Chain

Complete 510C camshaft kit with cams, gaskets, bearings and instructions. Bolt‑in for 88", 95", 96" and 103" CID engines (compression < 9.7:1). Stock pushrods and springs acceptable. Strongest 3,000–5,500 RPM. Made in USA.

€329.33 €414.01

-€38.82

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit

Complete camshaft installation kit with gaskets, bearings, ARP® bolts, and service seals. Made in the USA.

€150.98 €189.80

-€33.81

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Plus, Camshaft

Complete camshaft and top-end installation kit with quick-change and top-end gasket sets, bearings, ARP® bolts and installation compounds. Made in the USA.

€131.45 €165.26

-€29.41

FEULING OIL PUMP CORP. Camshaft Installation Plus Kit — Camshaft, Kit

Complete camshaft installation kit with gasket sets, roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, moly paste and Loctite®.

€114.38 €143.79

509C Chain Drive Camshaft Kit — Chain drive, for 88 CID, '00–'06 Twin Cam

-€84.68

S&S CYCLE 509C Chain Drive Camshaft Kit — Chain drive, for 88 CID,...

Bolt-in 509C cams deliver excellent low/mid torque with strongest pull at 1000–4500 RPM. Installer must verify clearances; made in USA.

€329.33 €414.01

-€192.09

S&S CYCLE 509G Gear Drive Camshaft Kit — 88 ci

Bolt-in 509G gear drive cam kit for 88 ci engines. Includes cams, gears, bearings and gaskets. Requires professional installation and clearance checks.

€747.05 €939.14

-€10.60

ANDREWS Cam Drive Gear — Standard, 2.7354" diameter

High-quality heat-treated cam drive gear. Made in the U.S.A. Direct-fit replacement.

€41.20 €51.80

-€83.75

ANDREWS Cam Set for Chain Drive — 9 Series

Bolt-in cam set improving power from 1000–5400 rpm. Made from alloy steel billets; computer-designed profile. Uses stock springs. Installer must check clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — Grind 48H, Pair

Broad-tip cams tuned for strong low- and mid-range torque. Computer-aided design, billet alloy-steel construction, and heat-treated for durability. Made in USA.

€325.69 €409.44

-€85.50

FEULING OIL PUMP CORP. Reaper® Conversion Chain Drive Camshaft — 525 Series

Hybrid conversion camshaft; bolt-in for stock 88" and 96" engines. Broadens torque band, improves throttle response, 1750–5500 rpm.

€332.49 €417.99

640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines, 10.5:1–11.5:1 compression, 3,000–6,000 rpm

-€148.41

S&S CYCLE 640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines,...

Reduces compression for easier starting; retracts at rpm for full compression. For 95"–110" engines, 10.5:1–11.5:1. Installer checks required.

€468.32 €616.73

-€123.45

S&S CYCLE Camshaft Kit with Inner Gears — 510 Series grind, Gear type

Complete camshaft kit with inner and outer gears plus installation hardware: gearcover gasket, bearings, oil passage block-off kit, retaining ring, o-ring and instructions.

€359.38 €482.83

Cam Set for Chain Drive — 57 Series, Intake 236°, Exhaust 240°, Pair

-€83.75

ANDREWS Cam Set for Chain Drive — 57 Series, Intake 236°, Exhaust...

Computer-designed alloy-steel cam sets made in the USA; installer must verify clearances and splined cam drive sprocket compatibility.

€325.69 €409.44

-€85.50

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, fits 88–103 cu in engines

More power than 525 cams without losing low-end torque
Smooth, quiet valve train with refined cruise power band
Bolt-in for stock to mid 96" and 103" engines; responds well to compression, exhaust, and air-flow upgrades

€332.49 €417.99

-€51.63

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

-€51.63

S&S CYCLE H-Grind Camshaft — Gear, for '48–'84 Big Twins, fits 74" and 80"

OEM-spec hydraulic H-Grind camshaft, reproduces stock '48–'84 Big Twins cams; ideal for 74" and 80" restorations. Compatible with generator and alternator engines.

€200.80 €252.43

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine