Engine (2)

-€43.47

ANDREWS Camshaft — M520, Exhaust 248°, Intake 228°, Lift 0.520"

Precision-engineered camshaft, made in the U.S.A., for durable, smooth power delivery.

€203.33 €246.80

-€43.47

ANDREWS 465B Cam — Bolt-in

Bolt-in chain drive cam for 107–117" engines. Works with stock valve springs. Excellent low to mid rpm torque (1200–5600 rpm).

€203.33 €246.80

485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

-€43.47

ANDREWS 485 Bolt-In Cam — 0.485" lift, fits 107 cu in+ engines

Highest-lift bolt-in chain drive cam compatible with stock valve springs; strong low- to mid-range power for 107 cu in and larger engines.

€203.33 €246.80

-€53.80

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€251.11 €304.91

-€51.04

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€238.20 €289.24

-€87.62

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€408.92 €496.54

-€87.62

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€408.92 €496.54

-€43.78

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€204.32 €248.10

-€21.25

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€99.19 €120.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€72.25

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€337.19 €409.44

-€72.25

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€337.19 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€88.63

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€412.89 €501.52

-€87.62

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€408.92 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€43.73

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€204.11 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€43.73

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€204.11 €247.84

-€43.73

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€204.11 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€43.78

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€204.32 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€43.78

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€204.32 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€43.78

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€204.32 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€43.22

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€201.72 €244.94

Conversion Chain Driven Cam — 50 Series grind

-€69.79

ANDREWS Conversion Chain Driven Cam — 50 Series grind

Upgrades '99-'06 Twin Cam (except '06 Dyna Glide) to roller-style cam chains and replaces spring tensioners with hydraulic adjusters. Installation parts sold separately. Made in USA.

€245.02 €314.81

-€32.49

ANDREWS Replacement Pushrod Kit — Set of 4, Chromoly steel

Pushrods for Shovel engines; use stock diameter tubing to avoid cover tube interference. For stock stroke applications. Made in the U.S.A.

€151.61 €184.10

-€51.41

ANDREWS Adjustable Pushrods — 4 pack

Completely adjustable pushrods that replace nonadjustable stock pushrods on H-D engines. Made in the U.S.A.

€239.89 €291.30

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€25.98

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€121.21 €147.19

-€40.69

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€189.88 €230.57

-€11.44

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€53.40 €64.84

-€5.40

MIKUNI Carburetor Flange Adapter — 45 mm, Black

Flange adapter for spigot-type carburetors with straight-through design; includes clamp and made in Japan.

€25.19 €30.59

-€5.40

MIKUNI Carburetor Flange Adapter — 48.00 mm (1.89"), Black

Flange adapter for spigot-type carburetors with original straight-through design and included clamp. Made in Japan.

€25.19 €30.59

-€5.39

MIKUNI Carburetor Mounting Flange — 36.00–38.00 mm (1.42–1.50") , Black

Adapters fit spigot-type carburetors; includes clamp. Great replacement flange made in Japan.

€25.14 €30.53

-€5.39

MIKUNI Carburetor Mounting Flange — 1.50" width, Black

Adapters fit spigot-type carburetors. Great replacement flange that includes a clamp. Made in Japan.

€25.14 €30.53

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine