Engine (18)

Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

-€4.59

COLONY Floorboard Hinge Bolt Kit — Shoulder (Pivot) bolts, Chrome

Hinge bolt kit for floorboards — includes four shoulder bolts, four 1/4" flat washers, and four 1/4"-20 nylock nuts.

€12.99 €17.58

-€7.96

COLONY Brake Stud Kit — Front, Cadmium plated

Includes one stud, stud washer, 7/16" washer, 7/16" -20 nut and 7/16" lockwasher; for front brake shoe service; Made in the U.S.A.

€22.49 €30.45

-€1.83
Out of Stock

COLONY Rear Brake Rod and Cable Adjusting Nut — Hex nut, chrome

Precision fastener for fine adjustment and secure linkage connections. Made in the U.S.A.

€5.16 €6.99

-€4.39

COMETIC Cylinder Head Gasket — Cylinder head, 0.81 mm (0.032")

Durable cylinder head gasket engineered for reliable sealing and long service life.

€12.47 €16.86

Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium Plated

-€7.73

COLONY Rear Brake Anchor and Pivot Kit — Shoulder (Pivot), Cadmium...

Complete kit includes pivot stud, locating block, nut, and lockwasher for rear brake anchor and pivot assemblies.

€30.10 €37.83

-€3.35

COLONY Rear Brake Caliper Anchor Kit — Silver, Chrome finish

Includes 1 pin, 1 flat washer, and 1 cotter pin. Made in the U.S.A.

€9.47 €12.82

Rear Brake Pivot Bolt Kit — Shoulder (pivot), hex head, cadmium plated

-€6.39

COLONY Rear Brake Pivot Bolt Kit — Shoulder (pivot), hex head,...

Includes one pivot bolt, one washer, and one spacer. Made in the U.S.A.

€18.06 €24.45

-€2.03

COLONY Kickstarter Spring Studs — Cadmium plated

Quality reproduction of the original part. Made in the U.S.A.

€5.73 €7.76

-€2.55

COLONY Kickstarter Spring Studs — Chrome

Quality reproduction of the original part with precise fit and durable construction. Made in the U.S.A.

€7.23 €9.78

-€5.97

COLONY Primary Cover Filler Caps — Primary cover, silver

Low-profile closures that provide a clean, secure seal for service openings. Reliable fit and easy installation.

€16.88 €22.85

-€6.08

COLONY Primary Cover Filler Caps — Silver

Precision accessory for a clean, finished look. Made in the U.S.A.

€23.66 €29.74

-€1.15
Out of Stock

COMETIC Intake Manifold Seal — cylinder head, intake manifold fitment

Durable seal for reliable long-term sealing in the engine intake system. Made in the USA.

€3.25 €4.40

Primary Gasket Kit — 1.52 mm (0.060"), AFM (Aluminum Foam Material)

-€5.07
Out of Stock

COMETIC Primary Gasket Kit — 1.52 mm (0.060"), AFM (Aluminum Foam...

Complete primary gasket kit with all gaskets, seals and O-rings for inner and outer primary. Heat resistant above 205°F with ~85% shape recovery; does not require gasket sealer. Made in USA.

€14.34 €19.41

-€3.87

COMETIC Cylinder Base Gasket — 3.1875 in bore, 0.51 mm thickness, pair

High-quality cylinder base gasket with Viton® coating for fuel resistance and long-term reliability. Made in the USA.

€15.05 €18.92

-€3.08

COMETIC Breather Filter Element Gasket — 0.81 mm, 10 Pack, P/N C10114

High-quality breather gasket for reliable sealing. Made in the USA and manufactured from premium fuel-resistant materials for long-term service.

€11.93 €15.01

-€30.16
Out of Stock

COMETIC V-Twin Top End Gasket Kits — 3.57 in bore, 1200 cc, 985 cc

Complete top-end gasket kit with embossed stainless steel gaskets, proprietary rubber material, and all seals and O-rings for a full rebuild. Made in the USA.

€85.38 €115.54

Extreme Sealing Technology Complete Gasket Kit — Bore 3.1875", '77-'85 1000 XLH/XLCH/XLS

-€41.84

COMETIC Extreme Sealing Technology Complete Gasket Kit — Bore 3.1875",...

Complete gasket kit with MLS head gaskets, AFM exhaust gaskets and Viton seals; includes motor, primary, derby and inspection cover gaskets where applicable. Made in the USA.

€118.34 €160.18

Twin Cool Cooling System O-Ring Kit — COMETIC, C10139, Coolant tube

-€6.99

COMETIC Twin Cool Cooling System O-Ring Kit — COMETIC, C10139, Coolant...

Complete kit of O-rings and washers for Twin Cool cooling systems. Replace whenever the cylinder head is removed. Made in the U.S.A.

€19.81 €26.80

-€11.63

COLONY Motor Case Stud Kit — 8132-34

Complete kit with hardware to bolt stock motor cases together. Made in the USA.

€45.22 €56.85

-€11.63

COLONY Motor Case Stud Kit — Cadmium-plated

Contains all necessary hardware to bolt together stock motor cases. Made in the USA.

€45.22 €56.85

-€11.63

COLONY Motor Case Stud Kit — 8138-34, Cadmium plated

Complete kit with all hardware to assemble stock motor cases. Made in the USA.

€45.22 €56.85

-€11.63

COLONY Motor Case Stud Kit — Black, Cadmium plated, Silver

Complete kit with all hardware needed to assemble stock motor cases. Made in the USA.

€45.22 €56.85

-€3.56

COMETIC Pushrod Gasket Kit — C10133, COMETIC

Contains seals and high-temperature O-rings for one application. Made in the U.S.A.

€12.08 €15.64

-€6.33
Out of Stock

COMETIC Derby Cover Gasket — 1.52 mm, 5 Pack

Reliable derby cover gasket engineered for long-term sealing and fuel resistance.

€21.49 €27.82

-€25.44
Out of Stock

COMETIC Primary Gasket Pack — 1.52 mm, Primary Cover, 5-pack

Durable primary gasket pack engineered for long-term reliability, fuel-resistant materials, and multiple gasket types to suit intended applications.

€86.39 €111.83

-€18.07

COMETIC Cam Cover Gasket — 1.52 mm (0.060"), 5-Pack

Premium cam cover gasket built for durability and fuel resistance. Multiple types available to suit application needs. Made in the USA.

€51.15 €69.22

-€8.34
Out of Stock

COLONY Motor Mount Bolt Kit — engine mount, chrome polished

Individual bolt and nut sets for specific applications; includes allen screws, nuts and washers. Kit for motor mount installation.

€23.58 €31.92

-€9.49
Out of Stock

COLONY Motor Mount Bolt Kit — Engine mount, chrome polished

Individual bolt and nut sets for specific applications. Kits include allen screws, nuts and washers.

€26.83 €36.32

Cylinder Head/Base Gasket Kit — bore 3.937", thickness 0.36 mm, 0.76 mm, 2-pack

-€11.59
Out of Stock

COMETIC Cylinder Head/Base Gasket Kit — bore 3.937", thickness 0.36...

Multi-layer steel (MLS) gaskets with two Viton®-coated embossed spring-steel outer layers and an inner steel layer for added support. Made in the USA.

€45.02 €56.61

-€12.75
Out of Stock

COMETIC Cylinder Head Gasket — MLS, 4.000", 1.02 mm

High-performance cylinder head gaskets featuring MLS and SLS constructions for even torque distribution, reduced bore distortion, and long-term sealing. Made in the USA.

€36.13 €48.88

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine